How can I fix my task manager
open my task today Manager and his blank don't know why thinks that my son did something for her or can not someone help please tyvm
Hello
Your Task Manager shows no staus bar or cancel button, if so, it can be run in tinyfootprint mode. Double-click on the side windows of the Task Manager, and it will be normal.
Kind regards
Houta Bolduc
Tags: Windows
Similar Questions
-
How can I enable the Task Manager after recovering from an attack of Win32.GEMA
Hello
I am running Windows XP SP3.
I have recently had an attack of the Win32.GEMA Trojan horse. Details of it are here: http://www.microsoft.com/security/portal/Threat/Encyclopedia/Entry.aspx?Name=Trojan%3AWin32%2FRansirac.G
I recovered my system using:
AVG Rescue Disk
Kaspersky Rescue Disk
BitDefender Rescue Disk
Scan of MalwareBytes
McAffee analysis
Hitman Pro Scan
Spybot scan
Eusing Registry Cleaner
CCleaner
Overkill maybe? But it worked... Up to now
Apparently, the Trojan horse disables the Task Manager and that is I'm having bad to restore.
I followed the advice in this article from Microsoft - http://support.microsoft.com/kb/913623/ - but when I followed this part
To set the DisableTaskMgr registry entry to 0 for a specific user, follow these steps:
- Shut down the computer.
- Log the computer by using a user account with administrator permissions.
- Click Start, click run, type regedit in the Open box, and then click OK.
- In the left pane, click the following registry subkey:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System
- In the right pane, double-click DisableTaskMgr.
- In the value data box, type 0, and then click OK.
- On the file menu, click exit.
- Restart the computer.
N ° 5 says that disable TaskMgr should appear in the right pane, but there is no entry to disable TaskMgr. All it is an icon of the small 'ab' (the default) beside it, then, REG_SZ.
Then I tried to follow this part of the article from Microsoft
To set the DisableTaskMgr registry entry to 0 for all users, follow these steps:
- Shut down the computer.
- Log the computer by using a user account with administrator permissions.
- Click Start, click run, type regedit in the Open box, and then click OK.
- In the left pane, click the following registry subkey:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\
- In the right pane, double-click DisableTaskMgr.
- In the value data box, type 0, and then click OK.
- On the file menu, click exit.
- Restart the computer.
This time off TaskMgr was in the right pane - this time with a little "ohho? icon followed REG_DWORD
I tried to create a new entry for the current user by copying one for all users, but not joy.
Any suggestions?
CTRL + Alt + Del does not receive any reaction whatsoever, no Ctrl + Shift + Esc or click with the right button on the barv task and selecting the Task Manager
Thank you in anticipation
These KB articles are for a different problem when you receive these messages when you run the Task Manager...
Some malicious software is aware of the methods you're most likely to use to find and remove it (Task Manager, System Restore, command prompt, Internet, Google, etc.)
The malware does not allows you to use things like the Task Manager to find and remove, so it prevents them from becoming a process running on the system and the process will not start or the process will be completed as soon as it is launched.
The malware is happier when he let you think you need to use system restore, a repair install or reinstall your XP from scratch to fix your system when none of this is necessary.
You can fool the malware (and then fix it).
Assuming that your Windows is installed on your drive C, using Windows Explorer, navigate to the folder c:\windows\system32 and locate taskmgr.exe.
Copy the taskmgr.exe file and rename the copy something malicious software will not recognize. I like to call the copy:
c:\windows\system32\jose.exe
Double-click on jose.exe and see if the Windows Task Manager window opens now.
The problem is the malware won't let the taskmgr.exe a running process, but he does not know jose.exe as a running process in order to thwart you all (I have a feeling that he will well a day on jose.exe).
Will not 'fix' your task manager, but at least you will know whether or not the Task Manager mechanism works (taskmgr.exe still not start properly). If you try to remove some malware and the need to use the Task Manager, you can simply launch jose.exe (double-click) instead, but will be still infected your system.
-
How can I reinstall the Task Manager and monitor resource for Win 7?
I saw a lot of similar questions to mine and problems are resolved for the most part because the person is running in mode 'tiny' in the Task Manager. And, while the problem of the poster has been resolved, I must still be able to find an answer that actually answered the question: how to reinstall a task manager and resource monitor?
I don't want to seem rude or obnoxious, but that's all I really need to know. Is it possible to reinstall the Task Manager and resource monitor and how - what is done?
For a more easy, please take the following response,
I am running Windows 7
Parts of the the Task Manager and resource monitor will not run correctly (it isn't tiny mode, everything seems as it should be, they are just not all the work)
I did a lot of research and analysis and virus check
I do not have a file to restore good system (whatever the reason)
I decided that I have to reinstall the program
So my question is simple: how to reinstall a task manager and resource monitor? I can't find a download for it on the Microsoft.com site file; Maybe it's there, but I'm not.
Please don't bother spending time trying to figure what's wrong with my system, you will lose your time (this is the part where I'm really NOT trying to be rude, but I tell you the truth). I did the analysis, controls, etc. etc. I just need to reinstall.
So please, could someone just tell me how to reinstall only the Task Manager and resource monitor. I don't want to have to reinstall the whole system. It seems to me that it is not necessary; It's only two programs. It is possible and if so, how?
I thank very you much for any help. I hope that was clear, so no one loses time on it unnecessarily.
You are welcome.
There is no download for them because they are part of the full operating system.
See you soon.
-
I am running XP. I've always been able to use pressing the Ctrl/alt/del keys simultaneously to start Manager tasks - useful to close a task does not. Recently, I had some changes due to a virus problem and now when I use Ctrl/alt/del, I get a message saying "disabled by the administrator. I have Administrator status on my normal connection.
How can I activate the Setup again?... Thank you!
Hello
If you are familiar with editing the registry, navigate to this key and change the value of the 'DisableTaskMgr ' 0
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Systemhttp://computerquestionhelp.com/blogs/CTRL-ALT-Delete-Task-Manager-disabled-by-admin.html
Or you can download this zipfile to your desktop. This is a corrected policy there.
Unzip, then right-click, "VArestorepolicies.inf" and select "install".http://users.Telenet.be/bluepatchy/miekiemoes/tools/VArestorepolicies.zip
As has already been suggested, it is also a Marti goo to scna the system to ensure that it is clean.
-
How can I know the task manager the number of cores is enabled
at the start of my computer says I have three nuclei activated - but my processor has four cores. How to check this by using the Task Manager
In the Task Manager, click the performance tab. The no. graphics in the CPU usage history shows no. carrots.
For example, I have 8 graphics, which means that I have 8 cores.
-
How do I get it back once it has been before?
You could be in tiny footprint mode. See:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Task-Manager-problems
You need the fourth question.
This is for XP but always true http://support.microsoft.com/default.aspx?scid=kb;en-us;193050
-
How can I fix this place from the front?
Hi all
How can I fix this task of white color of the front?
(white_patch.jpg)
, I know "Clone Stamp" tool. But alas, it's the fuzzy search and disorder....(white_patch_CloneStampTool.jpg)
You have a pretty bad image to work with. However, you can try the following approach:
* Make a rough selection with the lasso around the white spot tool and put a feather to the selection in the options bar.
* Skip the selection of a separate layer (Ctrl + J)
Add a solid color fill adjustment layer and hang it on the selection layer that you just created. Use a color near the outer edge of the area of selection.
* Change the blending mode to darken
* Adjust the opacity to match. You can then adjust the color and adjust the opacity for a better match.
You can get something like this:
Paulo
-
Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix?
In the Task Manager, click on "File" and select "new task (run).
Type explorer.exe, and then press the ENTER key.
If you are able to connect successfully to the windows, scan the entire computer using updated anti-virus software and check the virus.
-
I accidentally deleted the process explore on my computer so now I have no task bar and no icons on my desktop. How can I fix?
You cannot remove a process, you probably just stopped it. In the Task Manager (where you have completed the process), click file | New task and in the dialog box that opens type "Explorer" and press ENTER.
-B-
http://www.officeforlawyers.com | http://www.OneNote-tips.com
Author: Guide to counsel for Microsoft Outlook -
New events and tasks are gray. How can I fix it?
I have installed the lightning and the new tasks and new events are not (grayed out) assets in all places (for example, the Tools menu, menu file-new, etc.). How can I fix it? Thank you
I found my problem.
The USHolidays calendar was read only and some how has been chosen.
When I select my home calendar I can now add new events/tasks.
Thanks for your help. -
'Manage account' does not appear in the Synchronization Options - how can I fix?
'Manage account' does not appear in the Synchronization Options - how can I fix?
It will be great if you could share a screenshot of what you see.
What you trying to do?
You have already set up your sync account? This is the only case that comes to my mind that prevents you to see the drop down menu. Take a look at this article and let me know if it seems familiar: How can I set up Sync on my computer?
-
How can I fix error download "Adobe Application Manager is corrupt"? It is said of application should be reinstalled, but it is not installed on my PC
Adobe - Adobe Application Manager: for Windows: Adobe Application Manager
-
When I click on Akamai Download Manager says of the window which opens, "413 header length too large." How can I fix? I am running Windows 8 on a laptop computer and that you have turned off my pop ups.
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.
-
After the V43.0.0.5820, Firefox works but is invisible on the screen. I do not remember what version I have updated since then, but this is done normally under actual multiple monitors as with all other software installed.
Currently it is forcing me to use Internet Explorer, which works flawlessly.
If I stop actual multiple monitors, Firefox won't stay visible well that listed in Windows Task Manager.
When I'm out of multiple monitors, Firefox works normally.
How can I fix it?
I uninstalled V43 and re-installed V42. This seems to have solved the problem. I didn't answer on the forum of the AMM yet but it's still the early days. I'll post a response that I get to help a resolution.
-
Windows Explorer crashes. How can I fix it?
Recently, whenever I boot my Win 7 Ultimate, after that my programs are loaded, Windows Explorer crashes. How can I fix it?
Hello
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Maybe you are looking for
-
7th generation iPod connected and says sync completed immediately but no music transferred
new 7th generation iPod connects and configure the sync seems ok, but the iPod shows icon for 10 seconds and the iMac to sync iTunes say synchronization is complete but not transferred music
-
Cannot print mode quick project with DraftSight CAD software.
Hello DraftSight is a professional 2D CAD free software available at http://www.3ds.com/products/draftsight/download-draftsight/. I can't print quick mode of project with DraftSight but can using AutoCAD. I cannot understand this and would apprecia
-
Hello If anyone can help with information on what heat sink represents the map intel 600863-001 for HP DV7 Thank you
-
PC defender window will uninstall not msn will not uninstall, there is no program that can uninstall it on the Add/Remove program and he won't even be the arrow to the right to uninstall and I want just the program internet Explorer and nothing else.
-
Yesterday, I downloaded TDSKiller on my computer to use to remove viruses. When I did this, I was not able to load the program. However, I have noticed that after a while, the start menu don't jump upward when I clicked it. Also, while listening to