"How can I fix the iCloud" you cannot connect at this time "error?

Similar Questions

• How can I fix it? "Money cannot connect to the store purchases.   If you have any firewall software, make sure it has been set to allow communication on port 443.

  This message p [ops upward when I run iTunes]

  Money cannot connect to the store purchases.

  If you have any firewall software, make sure it has been set to allow communication on port 443.

  How can I fix it?

  me too... same problem... just started

  iTunes can't connect to the store purchases.

  If you have any firewall software, make sure it has been set to allow communication on port 443.

  MacBook Pro, osx el cap 10.11.1, itunes 12.3.1.23

• Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  I don't know if this is the problem, but it is something that must be correct establish a secure connection:

  Open Date and time preferences system, Date & time tab. Make sure that it is set to automatically set the time.

  Alternatively, make sure that your date/time is correctly set to the second.

  Another thing to try is to restart your modem and router.

• T60 - Vista: How can I fix the user profile? Is there a book explaining the steps?

  T60 - Vista: How can I fix the user profile?

  On startup, I get the message "the user profile service has no logon. User profile cannot be loaded. »

  To the boot, safe mode, I get the message "your user profile was not loaded correctly. You have been logged on with the default profile. Check the event log or contact your administrator.

  Since I don't have an administrator:

  • How can I get to the event log?
  • How can I fix the user profile?
  • Maybe you can point me to a book that might guide me in the process.  I'd rather learn to have to repair it by someone else.

  Thank you for your response.

  Zuma Balou

  Go through this link

  http://support.Microsoft.com/kb/947215

• How can I fix the error 35603 Runtime

  How can I fix the error 35603 Runtime

  Hi walter101,

  ·         What version of the operating system is installed on the computer?

  ·         When exactly do you get this error message?

  ·         What is the full error message?

  ·         You did changes to the computer before the show?

  Answer with the information required to help more.

  You can also see the article:

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  For reference:

  What is a runtime error?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-runtime-error

• How can I fix the ati display driver

  How can I fix the display driver?

  Hello

  I thing the problem is related to Internet Explorer. Try to see (the Internet Explorer menu) if in the display menu, the Zoom is set to 100%, the text size is set to medium and style is set to the default style.

  What version of Internet Explorer you are using?

  Please post the results.

  Best regards

  Andrew

• Access to a specific registry key (HKEY_USERS\S-1-5-18\software\Microsoft) causes a BSOD. How can I fix the key?

  Original title: access to a specific registry key generates BSOD. How can I fix the key?

  Scans the registry in XP causes a BSOD. The wrong key is HKEY_USERS\S-1-5-18\software\Microsoft. Access to manually also causes a BSOD so I can't delete or export it. I do not have a restore point from before the problem started. Other than the access to that key or run a search, XP works well.
  Is it possible to fix this?

  Not having no not this error in my notes (in other words, I've not seen at least 2 times), I Googled it and first fell on a MS KB article:

  http://support.Microsoft.com/kb/810558

  This article includes this statement:

  Contact Microsoft Technical Support to help heal the corruption in the registry.

  I think that is where you are right now, so let's see what is the response of the Microsoft Support Engineer, now that there is more information.  I always love to see what they have to offer first.

  Why and how did you change the system restore to create restore Points 3 a day for 30 days (FYI - that is not the same as a backup).

  If you were to solve some problem at the time, what was the question?

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  In the meantime, I would run a chkdsk /r on your volume XP since XP Recovery Console.

  If you are not sure of the SP2 CD you have is an XP bootable installation CD authentic and not some kind of restore CD for the Dell system to 100%, I would recommend this (that I've seen more than 2 times):

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• How can I fix the error on the email page. It doesn't let me open the e-mail.

  Error on the email page

  How can I fix the error on the email page. It doesn't let me open the e-mail. I can get there but nothing opehs I have windows xp... Please contact me at * address email is removed from the privacy * thanks for any help

  Are we to guess which email page you are talking about? Could this be one of them?

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• How can I fix the following in "Scanner and Camera Wizard" error message an error occurred while setting scanner preferences.

  How can I fix the following in "Scanner and Camera Wizard" error message an error occurred while setting scanner preferences.   I have widows xp pro

  Hi Plumbbgp,

  1. what brand & model of the scanner?

  2. the scanner was working fine before?

  3. don't you make changes on your computer before this problem?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• How can I fix the link between adobe and windows if I see .pdf not win32 application

  How can I fix the link between adobe and windows if I see .pdf not win32 application, without the disc?

  "Adobe" is the name of the company that provides a great many different applications.

  Adobe Reader is free and allows you to view pdf files.

  Adobe Acrobat is expensive and allows you to create, edit and view pdf files.

  Assuming that you are referring to the reader, uninstall all the versions of it using the control panel > add or remove programs.  Then either

  1. go to http://get.adobe.com/reader/?promoid=BUIGO and download the current version (remember to uncheck the box to install McAfee Security Scan Plus.

  or

  2. go to http://www.foxitsoftware.com/Secure_PDF_Reader/ and download Foxit Reader, a small pdf reader and many more.

  Then, install the reader that you have downloaded.

• My CD drive on my Dell 2400 appears disabled (on Admin Managemnt yellow exclamation point) as this is my plugin dvd recordr/cd player recorder. How can I fix? Thank you

  My CD drive on my Dell 2400 appears disabled (on Admin Managemnt yellow exclamation point) as this is my plugin dvd recordr/cd player recorder. How can I fix? Thank you

  Locate your CD drive integrated in the device list manager.

  Do a right click on it, it should appear a window with "Disable"... 'Enable '.

  Click Activate.

  It is a possibility, the other is...

  The fact that you are also using EXTERNAL units could be the 'reason' why one integrated disabled to start with.

  The USB in the BIOS setting must be wrong... to do this.

  In addition, the "HALT ON...» ' Command, in the BIOS, will not. (It is possible that the "Halt" command is... ON "ALL ERRORS").

  Assign to this... "WITHOUT ERRORS".

  This should cure the problem of USB connection (for external use) disable your "built-in" CD player

• I lost all the sound elements of the vista Media Center! How can I fix the problem?

  I have vista Home premium op sys and my media center windows lost audio output. Wheather read files from my hard drive or a DVD. mEDIA PLAYER has SOUND BUT NOT MEDIA CENTER. How can I fix the problem?

  Hello
  • What were the changes made before the problem occurred?
   
  You can check this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center

• HOW CAN I FIX THE ERROR: "REGISTRATION FOR THE SERVICE IS MISSING OR DAMAGED?

  HOW CAN I FIX THE ERROR: "REGISTRATION FOR THE SERVICE IS MISSING OR DAMAGED?

  When you see this error message?

  IF its all in trying to make an update, then:

  Make sure that the following services are listed and started. in "search programs and files" type "services" (without the quotes). In the results, click on 'services' and the services window should open.

  Make sure that the following is listed and started:

  Background Intelligent Transfer Service

  The base filtering engine

  Cryptography Service

  DCOM Process Launcher service

  Remote procedure call (RPC)

  RPC end point mapper

  Windows Modules Installer

  Windows Update

  IF it's trying to make an update and the foregoing is listed and running, then try this fixit - https://support.microsoft.com/en-us/kb/971058 to see if it helps.

  PS - if one of the services above are not listed, or is listed but not start, then see if you can update your antivirus program and run a scan full to see if it detects malicious software. Then, run the fixit above.

• How can I fix the "drag and drop" feature in Windows 7? It used to work, but now does not work, for no apparent reason!

  How can I fix the "drag and drop" feature in Windows 7?  It used to work, but now does not work, for no apparent reason!

  What happens when you try?  Make sure you drag the icon image and not the text of the name.

  If it still doesn't work there are some registry changes that can try to alleviate the problem.  But because the changes to the registry are tedious and dangerous, I recommend to leave the system to repair it for you.  Here's how:
  1. Type of restore in the search box of the start menu to find and open to restore system files and settings from a restore point.
  2. Click Next, choose a date before the problem started, then click Next once more.

  • This process only takes around 2 minutes and only restores your system files/settings: it will not affect any of your files, documents, photos, emails, or anything else.
  If the system restore does not resolve the problem try this to replace missing or corrupted system files.  Here's how:
  1. Type cmd into the start menu search box, and then press Ctrl-Shift-Enter to launch as administrator.
  2. At the command prompt to start the File System Check, type sfc/scannow .

• How can I fix the error CAHeadless has encountered an error [..-.. \Src\DataManage.cpp-410]

  How can I fix the error CAHeadless has encountered an error [..-.. \Src\DataManage.cpp-410]

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I was also getting the error caheadless. I uninstalled PS first and he went