How can I fix the screen because everything is horizontal and not vertical poster?
How can I fix the screen because everything is horizontal and not vertical poster?
Hello
Please tr
- Press and hold Ctrl + Al bot
- Press the enemy (left or right because I do not know what sense on your screen)
Hope this helps
Tags: Notebooks
Similar Questions
-
How can I fix the screen brightness?
How can I fix the screen on a Gateway Laptop brightness using vista? It is dark as on battery and plugged. I don't know ANYTHING about computers so simple language please.
Press and hold the "Fn " key in the lower left of the entry door
keyboard. This is the first key on the left.Press arrow key at the bottom right of the keyboard for
increase the brightness of the screen. The key is printed with a sunburst icon.
Pressing the button will increase the brightness to the maximum setting.Press and release the button will increase the brightness in smaller
increments.Press the arrow key down in the lower right of the keyboard
to darken the screen. The key is printed with a sunburst silhouette.See: http://www.ehow.com/how_6776262_change-brightness-gateway-laptop.html
Microsoft® Security MVP, 2004-2010
-
How can I change the cursor in an individual account (and not the owner) a computer to my client?
How can I change the cursor in an individual account (and not the owner) a computer to my client?
Hi MichaelConner1,
You can keep the individual mouse for each user account on the computer.
Log on to each user account and then change the mouse pointer scheme using the link below and check if it helps.
http://www.Microsoft.com/enable/training/WindowsXP/pointerscheme.aspx
-
How can I fix the screen on Satellite Pro L300?
How can I fix my screen Satellite Pro L300? I went by mistake about it.
Although there seems to be nothing wrong with the external armor but there seems to be a few lines on the screen.The glass is cracked? You see the flow of liquid crystals when you move the screen?
If the lines are perfectly horizontal or vertical, and then the glass behind the protective plastic surface is cracked, requiring a replacement LCD.
An authorized service provider can give you a new LCD Module. Visit the Web from Toshiba for a list of the ASP
-
How can I fix the "... / dev/vmnet0 is not running" _permanently_?
A ran merger with happiness for quite some time, all very good, no problem. Upgraded to Mac Snow Leopard and now every time the computer is restarted merger cannot access the LAN bridge, which gives the message:
"The network on/dev/vmnet0 bridge device does not work".
I managed that mitigated thanks to the tried and true and often recommended:
sudo/Library/Application Support / VMWare Fusion / boot.sh - restart
command. However, at the next restart I have to run this new.
So my question is this: How can I fix this problem so that this command should not be run on each reboot? What makes break my update of Snow Leopard?
Thank you
J.
How can I fix this problem so that this command should not be run on each reboot? What makes break my update of Snow Leopard?
The update probably got rid of the startup item that calls boot.sh. Relocation of Fusion (this will not affect your virtual machines) should fix things upward. In general I would say reinstallation Fusion on a major change of OS version, that I wouldn't count on any last thing being kept properly.
-
How can I get the question mark to come upcorrectly and not as a THURSDAY
When I change to us the question mark I get this E - How do I get this turned off -
When I change to us the question mark I get this E - How do I get this turned off -
Key LEFT ctrl + SHIFT RIGHT button > then shift + question mark key, will give... E
Repeat the same thing above, it will be back to normal, and he will give...?
Note: the procedure of 'LEFT touch ctrl + RIGHT SHIFT key' does not have the first time. Try again. He's going to do as I've mentioned above.
-
Define the components horizontally and not vertically
Hello
Where can I set up a page layout object so that the components inside are displayed horizontally and not vertically?
Thank you
TSPSHello
Example of
EDIT:
You must include the content it contains.Kind regards
Sicard.Published by: Santosh Vaza August 8, 2011 17:31
Published by: Santosh Vaza August 8, 2011 17:32
-
HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)
Hello
Please do not type in capital letters because it's difficult to read and considered to be shouting.
---------------------------------------------------------------------------------------------------
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
The system has RAID? If so, it's also very suspicious.
This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.BCCode: 7F 0x0000007E which is also 0x1000007E
Cause
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
interpret, you must identify which exception has been generated.Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
the Microsoft Windows Driver Kit (WDK).Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques.
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the
- Reference of the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
(the address of the exception) must identify the driver or function that caused the problem.If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .In case of exception code 0 x 80000002, the trap frame provides additional information.
If you do not know the specific cause of the exception, consider the following questions:
- Hardware incompatibility. Make sure all new hardware that is installed is listed in the
- List of Microsoft Windows Marketplace tested products.
- Service driver or defective peripheral system. A service driver or defective peripheral system can be
- responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
- and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable
or remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
in Safe Mode, you must start the computer by using the Recovery Console to access the file.If the problem is associated with Win32k.sys, the source of the error may be a third remote
control program. If this software is installed, you can remove the boot of the computer service
by using the Recovery Console, and then by removing the offending system service file.Check the system log in Event Viewer for additional error messages that might help identify the
device or the driver that generated the bug check 0x7E.You can also disable memory cache BIOS may try to resolve the error. You should also
Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
For more information about these procedures, see the manual of your computer.The error that generates this message may occur after the first reboot during Windows Setup, or
Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
space, reduce the number of files on the disk drive hard target. Find and delete any temporary
the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
contain fragments of file saved to disk scans. You can also use another hard drive with more drive
free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-----------------------------------------------------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen of the.
http://www.NirSoft.NET/utils/blue_screen_view.html
death ' crashes and displays information about all accidents of a table.
FreeBlueScreens many are caused by drivers of old or damaged, in particular the video drivers
However, there are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Does not work
tell all possible driver issues).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
How can I fix my screen to be so 'jerky' when I'm scrolling?
Original title: scrollingHow can I fix my screen to be so 'jerky' when I'm scrolling?
Hello
1 are. what screen you referring?
2 does happen with all screens?
3. This should happen in Internet explore?
4. don't you make changes to the computer until the problem occurred?
I suggest you try the steps mentioned below and check if it helps.
Method 1: Resources for troubleshooting problems in Windows XP
http://support.Microsoft.com/kb/307960
Method 2: I also suggest you to install the updated drivers for the video card on the computer by visiting the manufacturer of the video card and check if it works.
How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658
Hope this information is useful.
-
How can I fix the "drag and drop" feature in Windows 7? It used to work, but now does not work, for no apparent reason!
What happens when you try? Make sure you drag the icon image and not the text of the name.
If it still doesn't work there are some registry changes that can try to alleviate the problem. But because the changes to the registry are tedious and dangerous, I recommend to leave the system to repair it for you. Here's how:- Type of restore in the search box of the start menu to find and open to restore system files and settings from a restore point.
- Click Next, choose a date before the problem started, then click Next once more.
- This process only takes around 2 minutes and only restores your system files/settings: it will not affect any of your files, documents, photos, emails, or anything else.
If the system restore does not resolve the problem try this to replace missing or corrupted system files. Here's how:- Type cmd into the start menu search box, and then press Ctrl-Shift-Enter to launch as administrator.
- At the command prompt to start the File System Check, type sfc/scannow .
-
How can I fix the problem of not being able to open files by double clicking with photoshop
How can I fix the problem of not being able to open files with photoshop by double-clicking it in windows Explorer?
This problem affects psd, jpg, and png files. I get an error saying "the program can't start because adbeape.dll is missing on your computer. I can open all these types of files in the menu 'open' in photoshop. It is not a matter of them not having no not extensions. I use windows 7.
Thank you
Thanks for the update.
Just for test, could you please rename Photoshop.exe to Photoshop CC2015.exe location: C:\Program Files\Adobe\Adobe Photoshop CC2015
then change the file association to the new renamed exe file and let us know if this helps or not.
-
How can I fix the old sick apple mouse from 6 months on wire scrolls alone now
How can I fix the Apple mouse sick, aged 6 months on a thread that has been scrolling OK but now scrolls just of internet pages to the top of the page using El Captain so far?
Probably need a clean place, tried.
-
How can I fix the icons who are unable to move the bar to the add-on?
How can I fix the icons who are unable to move the bar to the add-on?
It didn't help me, but it was a good try. I found an extension called U I 1.4.4 Fixer who did most of what I was looking for. Thanks for answering my question so quickly Cor - el.
-
How can I make the screen keyboard on disappear?
How can I make the screen keyboard on disappear?
Press the key at the bottom far right (icon with an arrow to the bottom of the keyboard).
-
How can I fix the error 35603 Runtime
How can I fix the error 35603 Runtime
Hi walter101,
· What version of the operating system is installed on the computer?
· When exactly do you get this error message?
· What is the full error message?
· You did changes to the computer before the show?
Answer with the information required to help more.
You can also see the article:
Suggestions for a question on the help forums
http://support.Microsoft.com/kb/555375
For reference:
What is a runtime error?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-runtime-error
Maybe you are looking for
-
Can I access on my iMac with MacBook cd drive
Can I access on my iMac with MacBook cd drive
-
Check in a project without media
Hi all. Probably a very simple answer to this question, but something I have not been able to work on myself. I currently have a library containing a single project which takes up 100 GB of storage on my external HARD drive. This project is complete,
-
is Security tab..tht thngs that may access are changed for refusal... so please now tell me how to access all the operations of tht... bz if I open c or d drive... it shows access is denied... and it shows in his propertis... u must b an administrati
-
Support of Twitter on blackberry?
Hello Can I add twitter support to my blackbeery application? I just wish I could log in and post tweets. I use jde4.5 Thanks for any help.
-
I want to get rid of the bar that keeps going from top of my screen Windows 8.1
Is a black bar that tells me where I come from and I have to keep clicking on it to get rid of - whenever I put my cursor anywhere near the top of the page - he comes down and tells me where I am as I did not already know that! It's really annoying.