How can I fix the USB ports on work for Vista?

Similar Questions

• How can I use the USB ports in Windows XP Mode?

  Windows XP mode

  I need to use the USB port, but are not available in Windows XP mode, how do they available?

  Thanks, I need an answer soon.

  Plug the USB device, click the USB menu

  Click Attach device.

  Please wait while this one is initialized.

• How can I get the HP Laserjet P3005 work in Vista?

  I tried all the drivers that are listed in the download area drivers. I connected the printer via USB, it says that the generic driver will not work.  He can not get the printer to recognize. Now, when I plug the printer to the usb port, it appears in Device Mgr as USB hub generic.  I can't figure out how to install this printer.

  Sorry, my bad.

  Run the file and take note of the extracted path.

  (for example C:\HP LJP3005 PCL6 driver)

  Connect the USB cable to your PC and to ignore auto-detection.

  Enter the control panel > printers

  Click on the bar of tools add printer, and then select a local printer.

  Select the listed USB port (e.g., USB001 or DOT4 USB) and click Next

  Below is the list of printers, click on 'disk '.

  Enter the location of the extracted folder, then click Browse and select the file hpc300xc.

  Now, click Open and then OK

  If you see several models of printers, select the correct one and click OK until the end of the wizard.

• How can I fix Windows Update? -Error 8000FFFF for Vista Home Premium

  Your suggestions to other users did nothing to solve the problem. I always get: 8000FFFF with update microsoft Windows Vista Home Premium.  I ran Microsoft fixit as well as your suggestions for the record of change of name (updated - and reset file) without resolution.  It shows that I have Service Pack 2, but it don't did me not run updates since 2009...  I tried the steps with or without Norton anti-virus on.

  Hi Okoserce,

  You can try the following steps and check if it helps:

  Method 1:

  You can read the article and check if it helps:

  If you have already run the Fixit from the link, then try the manual steps to change the registry settings and check if it helps.

  Windows Update Error 8000FFFF

  Important: The above link contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, you can view the article:

  Back up the registry

  For more information, see the article:

  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  Method 2:

  You can download and install the system update readiness tool and check if you can install windows updates.

  You can see the following from the same article:

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Method 3:

  If the problem persists, try to run a SFC scan on the computer that would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

• How can I fix the link from Outlook Express for Internet Explorer

  I am running Windows XP home. Whenever I get an email with a link to a website, my outlook express freezes and I havce to restart.

  Can someone help please

  Reset IE as default value even if it already seems that is first, and then restart it.

  Control Panel | Add/Remove programs. Set Program Access and Defaults. Custom + down arrow | Choose a default browser. Select the Internet Explorer radio button.

  If that does not do...

  Hyperlinks do not work in Outlook Express or in Word (revised 29-Apr-09)
  http://support.Microsoft.com/kb/823301

  Hyperlinks do not work in Outlook Express after you put upgraded to IE7 [or IE8] (revised 29-Apr-09)
  http://support.Microsoft.com/kb/929867

  If still no joy:

  With the permission of MVP Frank Saunders. [RIP]

  If nothing happens when you click on a link:
  Open Windows Explorer or on the control panel.
  Go to tools | Folder options | Types of files.
  Scroll to [NONE] URL: HyperText Transfer Protocol (NOT the shortcut URL: Internet) and select it.
  Click Edit or advanced, depending on your version of Windows.
  Choose 'open '.
  Click on change.

  "Application used to perform action" should read:

  "C:\PROGRAM may EXPLORER\iexplore.exe" - nohome (check the path to)
  Iexplore.exe to ensure that it is correct and use the double quotes).

  DDE should be checked and in the boxes below, you should have:

  #1:
  « %1 »,,-1,0,,,

  #2
  IExplore

  #3 (white)

  #4
  WWW_OpenURL

  Protocol URL: HyperText Transfer with Privacy should be the same.

  If the foregoing is correct, uncheck the box: use DDE.

  And if you still have problems, try a new OE identity.

  You may have a damaged identity especially if it's the default main identity. File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

• How can I disable the automatic installation of updates for Vista?

  HP Pavilion dv2 laptop... Vista

  I use my phone sparingly & almost exclusively in public presentations.  I have recently (in response to a popup) changed the setting so that Windows updates are installed automatically.  Since then I have had 2 thoughts, because I don't want that Windows updates (reboots, etc.) could interfere with some presentation planned (or current).

  Where can I change this setting?

  Thank you

  Hello:

  The info on the link below should be of help to you.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Paul

• How can I get the Disk Defragmenter to work under Vista?

  Disk Cleanup cannot get Disk Defragmenter to work.

  Hello

  I wasn't a big fan of the disk in vista Defragmenter

  Download a little program called auslogic disk defrag and its FREE and works very well!

  http://www.filehippo.com/search?q=Auslogics

  Concerning

  GT4U

• How can I fix the old sick apple mouse from 6 months on wire scrolls alone now

  How can I fix the Apple mouse sick, aged 6 months on a thread that has been scrolling OK but now scrolls just of internet pages to the top of the page using El Captain so far?

  Probably need a clean place, tried.

• How can I fix the icons who are unable to move the bar to the add-on?

  How can I fix the icons who are unable to move the bar to the add-on?

  It didn't help me, but it was a good try. I found an extension called U I 1.4.4 Fixer who did most of what I was looking for. Thanks for answering my question so quickly Cor - el.

• Photosmart HP 6510 - can't find the USB port to connect to the computer. It is right in front of my face?

  Photosmart IHP 6510 - can't find the USB port to connect to the computer. It is right in front of my face? I can't find a diagram online. do not have wireless capability. With the help of MacPro with Snowleopard.Thanks.

  Hello

  The usb port is not #22. as seen in the picture. It's in the back of the printer on the side right hiand.

  

  Best regards

  ERICO

• How can I fix the error 35603 Runtime

  How can I fix the error 35603 Runtime

  Hi walter101,

  ·         What version of the operating system is installed on the computer?

  ·         When exactly do you get this error message?

  ·         What is the full error message?

  ·         You did changes to the computer before the show?

  Answer with the information required to help more.

  You can also see the article:

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  For reference:

  What is a runtime error?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-runtime-error

• How can I fix the ati display driver

  How can I fix the display driver?

  Hello

  I thing the problem is related to Internet Explorer. Try to see (the Internet Explorer menu) if in the display menu, the Zoom is set to 100%, the text size is set to medium and style is set to the default style.

  What version of Internet Explorer you are using?

  Please post the results.

  Best regards

  Andrew

• Access to a specific registry key (HKEY_USERS\S-1-5-18\software\Microsoft) causes a BSOD. How can I fix the key?

  Original title: access to a specific registry key generates BSOD. How can I fix the key?

  Scans the registry in XP causes a BSOD. The wrong key is HKEY_USERS\S-1-5-18\software\Microsoft. Access to manually also causes a BSOD so I can't delete or export it. I do not have a restore point from before the problem started. Other than the access to that key or run a search, XP works well.
  Is it possible to fix this?

  Not having no not this error in my notes (in other words, I've not seen at least 2 times), I Googled it and first fell on a MS KB article:

  http://support.Microsoft.com/kb/810558

  This article includes this statement:

  Contact Microsoft Technical Support to help heal the corruption in the registry.

  I think that is where you are right now, so let's see what is the response of the Microsoft Support Engineer, now that there is more information.  I always love to see what they have to offer first.

  Why and how did you change the system restore to create restore Points 3 a day for 30 days (FYI - that is not the same as a backup).

  If you were to solve some problem at the time, what was the question?

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  In the meantime, I would run a chkdsk /r on your volume XP since XP Recovery Console.

  If you are not sure of the SP2 CD you have is an XP bootable installation CD authentic and not some kind of restore CD for the Dell system to 100%, I would recommend this (that I've seen more than 2 times):

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• How can I fix the error on the email page. It doesn't let me open the e-mail.

  Error on the email page

  How can I fix the error on the email page. It doesn't let me open the e-mail. I can get there but nothing opehs I have windows xp... Please contact me at * address email is removed from the privacy * thanks for any help

  Are we to guess which email page you are talking about? Could this be one of them?

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• How can I fix the error "searchfilterhost.exe" which keeps closing down of my computer?

  How can I fix the error "searchfilterhost.exe" which keeps closing down of my computer?

  SearchFilterHost.exe is part of Windows Search. However, it is Malware which can pass searchfilterhost.exe.
  I would like to start by downloading the free version of this tool. First check the updates and then run a full scan.
   
  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free