How can I get a broadband data desired while constantly monitoring data?
I have attached the vi that I currently - so far he smokes constantly, but I can't it connect to a desired rate.
Helpme9211,
Your post was a little light on the details, but looking at your code, I suspect you want to display the temperature of all 10 channels and then log on to the disc at a slower pace that you update the display.
I noticed a few things that could cause problems:
- Your DAQ assistant is set to acquire 100 samples at 100 Hz (taking 1 second for all the return values). You also have a delay of 100 ms in the loop that will be ignored because the DAQ Assistant is already longer than the back.
- You write to file each iteration of the loop, even if you only make a value chain each 600 iterations (or every 10 minutes because of the loop rates set out above).
- You perform a large number of seemingly useless table manipulations. I have not run your code, but it seems that you are currently taking 100 samples of each channel and then just take the first value of each channel and then recombine them these first values into a new table. A more effective way would be to simply acquire the values that you want to use and just wire the table directly.
I did a quick pass to clean these things up to - once again, I have not run this code because I have no HW here but I think it should help you on the right track.
Is it a VI you wrote yourself? If so, I would be interested to know what materials letting you know LabVIEW. I'm looking for ways we can help new users of LabVIEW succeed faster and it would be good to know where people are / aid resources.
~ SimonH
Tags: NI Software
Similar Questions
-
I tried to download a pdf and convert them into excel, but the data in excellent is always to the image format. How can I get the pdf data into the columns and rows so that I can do the calculations?
If you start the https://forums.adobe.com/welcome Forums Index
You will be able to select a forum for the specific Adobe products you use
Click on the symbol "arrow down" on the right (where it is said to see all our products and Services) to open the drop-down list and scroll
-
How can I get the filtered data from the first form
How can I get the filtered data from the first form in a second form to make an update of the multi.
Thank you very muchWilliam,
I would use for this collections. A link is good if you need to pass a single value.
1. create a collection
2 fill the collection with your result set
3. go in the page target and uses a method of a query in your link to this page
4. your target page receives a request and allows you to edit documents.Denes Kubicek
-------------------------------------------------------------------
http://deneskubicek.blogspot.com/
http://www.Opal-consulting.de/training
http://Apex.Oracle.com/pls/OTN/f?p=31517:1
------------------------------------------------------------------- -
How can I get my pc from freezing while configuring updates: stage 3 of 3-0% complete
- How can I get my pc from freezing while configuring updates: stage 3 of 3-0% complete
Hello
- That you update you are installing?
You can use the following methods that can help you solve your problem:
The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358
I suggest you follow the method 1,2 in link above.
Note: The article applies well to an another update, it should help in this case also.
-
Satellite Pro U400 - How can I get the native screen resolution for external monitor?
I have a samsung syncmaster external screen connected to a Satellite Pro U400.
The resolution of the screen goes up to 1280 etc. but the minimum samsung is 1440 x 920 (ish I forgot).
How can I get the samsung to display full screen expanded to save my eyes of the realativively small screen internal?Hello!
Have you tried to update the display on your laptop driver? Check the Toshiba site for an update:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversIn addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
And what operating system are you using? Have you installed all Windows updates?For external LCD, monitors, you must set the screen refresh rate of 60 Hz.
And if you want to change the resolution of the screen, you must select the second monitor in the graphics options on Windows.Good bye
-
How can I get audio through my tv while watching a video with media Center
so I attached the cord VGA from PC on TV and I get the photo and videos perfect buti only get audio from my laptop. How can I get audio through my TV?
If it is a VGA connector, which normally has a blue with 15 pins/holes while the connection method has no audio embedded in the head. You will need to use a separate audio connection.
Most TVs have a 3.5 small mm, sometimes with a green ring, to power the audio on the TV when you use this entry. If so, you need to connect the headphones taken computer to the TV with a 3.5 mm 3.5 mm cord.
Only some DVI and HDMI ports incorporate audio and even then it depends on the specific material to do so.
-
How can I get the changed data in a def type control containing an Xcontrol with a local variable
Hello
I did an Xcontrol and I inserted this control in a def type.
When I want to change the data of the control with a local variable in a VI the VI change nothing. The change of the data is not complete
How can I fix this problem?
Thanks for your help
Hello
What is your version of LabVIEW? You have a simple example program that demonstrates this behavior?
I found an other discussions related to your problems with Xcontrols:
update of type defs Xcontrol faade
No data change event generated for an XControl in a Type definition
I hope this helps.
Kind regards
-
How can I get the current date?
Hello!
I two EditFields that will act as a filter, so a user can say display me records from here to there.
I would like to default dates today at 7 days before.
Here is the code that I currently have:
Border border = BorderFactory.createSimpleBorder(new XYEdges(1,1,1,1)); txtStartDate = new EditField("", ""); txtStartDate.setBorder(border); Background txtBackground = BackgroundFactory.createSolidBackground(0xFFFFFF); txtStartDate.setBackground(txtBackground); add(txtStartDate); Border borderB = BorderFactory.createSimpleBorder(new XYEdges(1,1,1,1)); txtEndDate = new EditField("", ""); txtEndDate.setBorder(borderB); Background txtBackgroundB = BackgroundFactory.createSolidBackground(0xFFFFFF); txtEndDate.setBackground(txtBackgroundB); add(txtEndDate);
Is there something like a DateTime.Now to Blackberry? How can I achieve this? Thanks a lot for the help guys.
Ok........
Use this...
Date date; String currentdate = new SimpleDateFormat("dd/MM/yyyy").format(new Date(System.currentTimeMillis())); ------------------------------------------------------------------------------------Press Kudo to say thank to developer. Also Press the Accept as solution Button when u got the Solution.
-
How can I get voice and data to work with the ASA 5505?
Here's the issue I'm having. Can I get a Cisco 7940 to work behind one site to another configured ASA 5505 and I can also get data to work behind it. However, when I try to create a separate Vlan for voice and data, it does not work. Our voice VLANs on our remote sites are 172.30 and data are 172.31, when I put the inside interface with 172.31 data will work and when I on it 172.30 voice will work. I upgraded to a security more license and tried vlan3 created as voice. I have the data to the top and work but I can't get vlan3 to work. Any help would be greatly appreciated. Thank you
Here is my current config:
hostname TESTvpn
activate the password xxxxxpasswd xxxxx
username admin password xxxxx privilege 15
name Corp_LAN 10.0.0.0
name 192.168.64.0 Corp_Voice
name 172.31.155.0 TESTvpnobject-group network SunVoyager
host of the object-Network 64.70.8.160
host of the object-Network 64.70.8.242the Corp_Networks object-group network
network-object Corp_LAN 255.0.0.0
object-network Corp_Voice 255.255.255.0interface vlan2
nameif outside
security-level 0
IP address dhcp setroute
No tapinterface vlan1
nameif inside
security-level 100
IP 172.31.155.1 255.255.255.0
No tapinterface vlan3
nameif Corp_Voice
security-level 100
IP 172.30.155.1 255.255.255.0
No tapoutput
interface Ethernet0/0
switchport access vlan 2
No tapinterface Ethernet0/7
switchport access vlan 3
No tapoutput
dhcpd allow inside
dhcpd address 172.31.155.10 - 172.31.155.30 inside
dhcpd dns 10.10.10.7 10.10.10.44 interface inside
dhcpd sun.ins area inside interface
dhcpd allow insideenable Corp_Voice dhcpd
dhcpd address 172.30.155.10 - 172.30.155.30 Corp_Voice
dhcpd dns 10.10.10.7 10.10.10.44 interface Corp_Voice
dhcpd interface of sun.ins of the Corp_Voice domain
enable Corp_Voice dhcpd
dhcpd option 150 ip 192.168.64.4 192.168.64.3Enable logging
exploitation forest buffer-size 10000
monitor debug logging
logging buffered information
asdm of logging of informationoutside_access_in list extended access allow all unreachable icmp
outside_access_in list extended access permit icmp any any echo response
outside_access_in list extended access permit icmp any one time exceed
access extensive list ip 172.31.155.0 inside_access_in allow 255.255.255.0 any
inside_access_in list extended access allow icmp 172.31.155.0 255.255.255.0 any
Access extensive list ip 172.30.155.0 Corp_Voice_access_in allow 255.255.255.0 any
Corp_Voice_access_in list extended access allow icmp 172.30.155.0 255.255.255.0 anyVPN access list extended deny ip 172.31.155.0 255.255.255.0 object-group SunVoyager
extended VPN ip 172.31.155.0 access list allow 255.255.255.0 anyinside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Access-group Corp_Voice_access_in in the Corp_Voice interfaceGlobal 1 interface (outside)
NAT (inside) 0-list of access VPN
NAT (inside) 1 172.31.155.0 255.255.255.0Enable http server
http 172.31.155.0 255.255.255.0 inside
http 172.30.155.0 255.255.255.0 Corp_Voice
http 192.168.64.0 255.255.255.0 Corp_Voice
http 10.0.0.0 255.0.0.0 inside
http 65.170.136.64 255.255.255.224 outside
SSH 10.0.0.0 255.0.0.0 inside
SSH 172.31.155.0 255.255.255.0 inside
SSH 65.170.136.64 255.255.255.224 outside
SSH timeout 20management-access inside
dhcpd outside auto_config
Crypto ipsec transform-set esp-3des esp-md5-hmac VPN
crypto map outside_map 1 is the VPN address
peer set card crypto outside_map 1 66.170.136.65
card crypto outside_map 1 the value transform-set VPN
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
md5 hash
Group 2
lifetime 28800tunnel-group 66.170.136.65 type ipsec-l2l
IPSec-attributes tunnel-group 66.170.136.65
pre-shared-key xxxxxoutput
int eth 0/1
close
No tap
int eth 0/2
close
No tap
int eth 0/3
close
No tap
int eth 0/4
close
No tap
int eth 0/5
close
No tap
int eth 0/6
close
No tap
int eth 0/7
close
No tapPeter,
Note that access list names are case-sensitive, so you've actually done something different from what I proposed.
Please do:
no nat (Corp_Voice) 0-list of access vpn
No list of vpn access extended permitted ip TESTvpn 255.255.255.0 everything
IP 172.30.155.0 255.255.255.0 extended vpn access do not allow any list allextended VPN ip 172.30.155.0 access list allow 255.255.255.0 any
NAT (Corp_Voice) 0-list of access VPN
In the case where you did deliberately, for example to separate the 2 acl: note that acl VPN (upper case) is also used in the encryption card, where you cannot add a second LCD.
So if you want to separate you, you will need 3 access lists:
list of access data-vpn ip TESTvpn 255.255.255.0 allow one
voice-vpn ip 172.30.155.0 access list allow 255.255.255.0 any
access-list all - vpn ip TESTvpn 255.255.255.0 allow one
access-list all - vpn ip 172.30.155.0 allow 255.255.255.0 any
NAT (inside) 0-list of access vpn data
NAT (Corp_Voice) - access list 0 voice-vpn
outside_map 1 match address all vpn crypto card
Don't know if this was also clearly to my previous message, I recommend you to replace the "all" (in each of the ACL lines) to something more specific (i.e. a remote network, or group of objects that contain the remote networks).
HTH
Herbert
-
I just update to Windows XP SP3 on my laptop mac partitoned, side windows and can't get my LG monitor to download and see. I need assistance in basic terms, what I read is, unfortunately, beyond my knowledge of computers :)
Hello
· What is the model number of the monitor LG?
I suggest you t follow the steps below:
a. click on start
b. click on run
(c) in the Open box type devmgmt.msc
d. search for monitors and to extend the same
e. check what is listed and report us the same
See: how to manage devices in Windows XP: http://support.microsoft.com/kb/283658
-
BTW, my version of the disqualification is a quick start. Thank you!
Hello
This reference is provided in the pack Disqualification Customer Data Services (CDS). You can download it separately from the Oracle Software Delivery Cloud or OTN.
Kind regards
Nick
-
When I upload pictures to Flickr using mobile LR it does not include EXIF data (i.e. ISO, shutter speed, Aperture, etc.). Is there a way to do this turn on?
You can enable this in the Mobile Lr frame-> share with metadata. Hope that answers your question. -Guido
-
I just got my new iPhone 6s, until now, I had the iPhone 6.
as I use the Apple Watch I like to keep my health data but do not want to restore the entire backup to have a "fresh" iPhone
Any idea?
Thank you
The only way to restore the health data is to backup the old phone and restore it on the new phone. You must use iTunes backup with active encryption, or backup to iCloud.
-
How can I get the correct dates on photos for a Windows photo album
The dates on the pictures imported from the disk on which I downloaded them aren't dates that I took them. Tried FixIt program twice, but it has not solved the problem. CA
Hello
I suggest you refer to the link provided below to change the date and time a photo was taken.
Change the date and time a photo was taken
http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-date-and-time-a-picture-was-taken
See also:
Create a professional photo album today
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-professional-photo-album-today
-
How can I get my first maximally GPU while rendering?
Hi guys I was wondering if anyone had knowledge on how to maximize my GPU.
On average, the load is about 10-20% with spikes up to as high as 80%, it is everywhere and the load on the GPU load is never as high as I'd like. My card is a Zotac GTX 780ti OC so I know her candle a higher load then first was giving him. I've never tried overclocking it no more. Probably, maybe once that I learn how to use my card correctly. CUDA has been activated and works to a certain extent. On average my rendering speed is slower than what I remember getting Cuda enabled first. I always use the CS6 for legacy reasons. I was hoping there was a way to make the first use the better card because he feels like a waste if she can never push the card to its full potential.
Any suggestions?
Not really. Yet once, PrPro how is "mounted" leaves most of the to the CPU. When he asks to the GPU, it is good to have a decent one, but unless you do things who insist a lot about the effects of the GPU acceleration (that some people do) as long as you have a good recent GPU with at least 2 GB vRAM you are fine.
The biggest help to render times, you can be 'reinforces' the disc in/on the situation by using either a big striped HARDWARE RAID or splitting parts of project as the memory cache cache/media & database, project files and media to separate the internal drives at high speed. Well as the new m2 and other connectors of the drive come by working a large SSD, which will change as their read/write speeds are almost blinding...
Neil
Maybe you are looking for
-
When secure Web (those using SSL) pages contain content from sources non - SSL, Internet Explorer 8 and 9 ask if you want to show only the content that has been delivered safely. I could not find a prompt similar to Firefox. I know three possible exp
-
Hello I want 110 printer all-in-one D411 given to me by a friend. I put new ink in everything works well. The device is connected to the network. When I accept terms and conditions to activate. The machine checks the updates. A message appears. Error
-
CTRL-K to go to the start page no longer works
Pressing Ctrl-K anytime in Firefox always used to bring www.google.com. I've updated to the new 8.0 FF, and now Ctrl-K doesn't do anything. Deactivation of the modules did nothing.
-
HP Pavilion 8750: PCI Wireless card
In fact, the operating system is Windows Millennium Edition. am I right that there is no compatible with this machine wireless card?
-
How can I remove Windows 7 Loader Xe?
I don't know how it happened, but apparently, I downloaded some kind of charger. Now whenever I start my computer the Boot Manager asked me to choose between Windows 7 and Windows 7 Loader XE which I desperately want to remove because I never wanted