How can I get a continuous square wave to the duty cycle of 50% on one of the analog lines?
Hello, I had recently just buy an analog card to our system, and I'm still very new to labview. I have the PXI-6723, and I need to produce a wave square of 0 to 5 volts continuously. I used the square wave generator and used a writing funtion to one of the ports. This produces a momentary wave and that's it. I tried to put some time a loop around the square and watched as wave function. It produces constantly plots, but the write function always has the same thing. If I am the writing inside the loop function I get errors. Any help would be greatly appreciated. Thank you, Fred
Another function to generate the square wave, to change the generation of waveform buffer (the Subvi used) and to connect a control at the entrance to offset from the base generator functions. or simply use the add function on the output waveform.
Tags: NI Products
Similar Questions
-
How can I get WIndows8 TouchSmart to boot from the recovery disc
How can I get WIndows8 TouchSmart to boot from the recovery disc? With the recovery in the drive disk when I do a reboot or stop and start it does not read anything from the DVD player. My computer is a HP TouchSmart 23-D160QD.
You may need to change the boot order to boot from the DVD drive first. The steps to do this are in the document below.
http://support.HP.com/us-en/document/c00364979
These are recovery disks made by the recovery discs sent by HP? They will not work in a different system (you will receive an error message), but you are able to get the boot floppies in a different system? They should be able to start up to a point where the error message will be displayed.
-
I have a 7 d but the series stiker his party and I need the SN, how can I get it (I don't have the box) is there a way to find it on the menu of the camera?
The serial number is in the EXIF data. Any EXIF reader will show.
-
I wiped my pc and my windows vista. How can I get a copy, reinstall.i have the product code?
Hello
If Vista is preinstalled contact the Manufacter computer and ask them to send recovery discs; what they should do for a small fee.
And ask them if you have a recovery partition on your hard drive to reinstall the operating system to how it was when new.
If you have not deleted this partition (you tell how wipe you the hard drive!) you press F10 or F11, etc at startup to start the process of relocation.
Ask the manufacturer for their combination of button to do this, if it is always an option for you.
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
See you soon.
PS You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista must be installed. The product key determines which Edition is installed.
Builders recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
-
How can I get a driver 64 bits for the mouse?
I installed W7 to xp pro. W7 is a 64-bit operating system, xp is a 32-bit. My mouse (Logitech USB PS/2 optical mouse does not work.) When I check the drivers, they are 32-bit and when I install new drivers, they are also 32-bit. How can I get a driver 64 bits for the mouse?
Original title: mouse drivers
The game, August 28, 2014 16:18:16 + 0000, WILLROSS wrote:
I installed W7 to xp pro. W7 is a 64-bit operating system, xp is a 32-bit. My mouse (Logitech USB PS/2 optical mouse does not work.) When I check the drivers, they are 32-bit and when I install new drivers, they are also 32-bit. How can I get a driver 64 bits for the mouse?
I don't know if there is a driver 64-bit Windows 7 to your
mouse. It's Logitech to decide or not to produce a.
Check on their website to see if it exists. If not, you
are out of luck, but fortunately that a new mouse shouldn't be very
Dear. -
How can I get my tool clone to stop the reversal of colors instead of working as a clone tool!
How can I get my tool clone to stop the reversal of colors instead of working as a clone tool?
Blendimg and how the tool is set on?
-
How can I get an alternative serial number if the one on the CD does not work?
How can I get an alternative serial number if the one on the CD does not work?
Hello
Please see the below help documents:
Error: "serial number is not valid for this product". Adobe Creative Suite
Kind regards
Sheena
-
I have photoshopCC, but some how I get pop ups saying that my path for cs6 is expires, and then I buy and get a licience no, well I have not because I have a year of photoshop and lightroom CC. How can I get rid of this message from the Marie trial please
Go to Photoshop forum
-
How can I get my pictures to display in the order they were taken?
How can I get my pictures to display in the order they were taken?
Hey Mole,
Greetings.
- Open LR, go in the downstairs library module, click the capture time in the sort order.
Concerning
Rohit
-
How can I get 13.1 items to complete the download? He never goes beyond 8 percent, then I get the "download failed" and the error code u44m1i210. Anyway to get it installed or just disable the upgrade?
U44M1I210 - creative cloud help / error U44M1I210 | Install the updates:
http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1i210-installing-updates-CCM.html
-
How can I get audio to not start when the button is clicked?
I am new to adding audio to slides, buttons, click boxes. Import the recorded voice on the overall slide of files sounds easy enough. However, there are several buttons that display a legend I want audio to not start when the button is clicked. I added audio just for this button, but it starts when the slide begins.
How can I get audio to not start when the button is clicked?
Hello
Audio playback when the assigned object with the audio appears. That's why hear you when the button appears.
Try to assign audio instead to the object that is displayed when you click the button. Perhaps the legend.
See you soon... Rick
Useful and practical links
Captivate wish form/Bug report form
-
How can I make and delete a snapshot of the command line in ESXi 4?
How can I make and delete a snapshot of the command line in ESXi 4? ghettoVCB4i does, but I need unusual behaviour for two virtual machines. I need to be able to save only one of the two virtual drives, not both. So I can't use this script here. I need to write a script that will:
1 copy off the .vmx
2 make a snapshot of a virtual computer running
3 use the vmkfstools command to clone the vmdk in the backup location
4 remove the snapshot.
The snapshot is the part that I do not know how. I do not see a flash drive in vmkfstools and I do not understand the snapshot code in ghettoVCB4i.
Thank you!
vmkfstools is a tool for working with VMDK, has nothing to do with stereotypes. In the Busybox unsupported console, the only tool that you can use for some of the management of the virtual computer is vim-cmd , which is about a wrapper for VMware vimsh, take a look at our site for more information: http://engr.ucsb.edu/~duonglt/vmware/#vmware_vimsh
Basically, you're going to do something like the following:
vim-cmd "vmsvc/snapshot.create XXXX FIRST_SNAPSHOT MY_FIRST_SNAPSHOT_1"
where XXXX is VmId to the virtual machine that is retrieved from vmsvc/getallvms, then you are going to deliver the snapshot.remove
Here are some other useful commands dealing with snapshots:
Vim - cmd vmsvc/snapshot.removeall \[VmId]
[[[vim - cmd vmsvc/snapshot.remove \[VmId\] \[removeChildren\] \[snapshotLevel\] \[snapshotIndex\]
Vim - cmd vmsvc/snapshot.get \[VmId\]
ghettoVCB4i uses vimsh to do these things as well.
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
-
How can I get my menu to Center along the navigation bar
I created a menu using the horizontal menu widget. I'm placing it inside a box that I created and that spans the width of the screen. I want the menu to Center on the page, but he continues to be aligned with the navigation bar, that I created. How can I get the menu to Center on the page. I chose the icon on the toolbar to center but it does not work.
Thanks in advance for your help.
Try to pin the menu or use the scroll without moving to correct the position of the menu on the page.
Thank you
Sanjit
-
How can I get my bookmarks toolbar and not the bookmark sidebar?
How can I get my favorites back bar located on the section of the upper toolbar that runs through the screen. I loved the toolbar at the top of the screen. I want to get it back, he disappeared and everything I am able to do is the sidebar to bookmarks toolbar, which I hate. Can you help me? Thank you.
You can use one of the following methods to display the toolbar list and activate the desired bars it:
- Right click on a place empty on the tab bar (or the button '+')
- Press the Alt key to activate the classic menu bar > view > toolbars
- in customize mode > show/hide toolbars (see: Customize Firefox commands, buttons, and toolbars)
To enable the bookmarks toolbar, bar of menus or other bars, click it in the list.
Success?
-
How can I get TB automatically delete messages on the server and NOT remove TB?
My old version of TB has allowed me to delete messages from the server, because they have been downloaded to tuberculosis. How can I get the new version to do?
If you want that deleted mail from the server that you want to delete the account and start over with the pop Protocol, although IMAP is perfectly adapted to the use of phones and tablets and desktop computers all on behalf of a mail.
Maybe you are looking for
-
I have a pavilion A6000 and yes it's old but its running very well, but it has 512 MB of cache, speed: PC2-4200 MB/s and upgrade suggestions other than to get a new table. need to know what to buy. I have 4 GB of memory and a 32-bit to work with.
-
"WindowsUpdate_80200053" "WindowsUpdate_dt000"
I get the above error while trying to download the 2007 Microsoft Office Suite Service Pack (SP2) - KB953195 help Windows update (have tried to use automatic download twice). I also tried to download manually and received the error message "installat
-
Appellant thern said that my computer has been opened to the motherboard being compromised. As I have been using computers for 20 years and had never heard of this problem before I Hung up. The person said they were calling from microsoft! At their r
-
Acer eRecovery Management fail to install
Hello.. Someone Pliss help to solve this problem... I want to install Acer eRecovery Management on my Windows 7 Netbook professional but what he will miss most... They say: eRecovery cannot be installed 1. Start-up files. I have install a clean copy
-
FixIt left all my music files Media Player for the C"" drive. How your choice?
The tool recommended FixIt reconfigured/updated to update my Windows Media Player and sent almost all my music files on drive "C" of their location in the multimedia player! How can I move the files BACK to the media player? He said that none of the