How can I get activation to a computer that does not work?

Similar Questions

• How can I get hpzidr12.dll? HP SOLUTIONS DOES NOT WORK

  I have a c7280 all in one printer and just installed win 7 32 bit ultimate on windows vista ultimate. HP solutions asked me on an upgrade to get the printer etc drivers and software updated for win 7. I downloaded the complete installation as directed by HP and the installation version, the computer just sits there in the part of installing software and then comes up with the next Dot - 4 Wrapper message repair. This file does not exist and is required for installation. then it gives me the necessary dll. who is C:\windows\system32\hpzidr12.dll manufacturer HP version 0.0.0.0. Where can I get this DLL file? I can't support for HP because my printer is under warranty and of course all the HP wants is your money if you have a problem and certainly no worries to try to help their clients regarding this problem. I installed their patches, and they do not work. Now, my printer is not fax or copy. It is connected wireless and I did HP diagnostics and wireless printer software and device software and several patches there including the dog patch, and the patch scan. always uninstall and reinstall the software reveals the same problem and when you make the wireless Assistant and Assistant Diagnostics my printer is recognized and pass all the tests. also the wizard test to the PRINTER and fax work just fine, and I can send and receive faxes and copy and scanning, fine print. When on my computer, however, the tests work as leader, however, when I go to HP solutions program gives me an error (yellow triangle with exclamation point) and States printer is not connected. Yet, I can print and scan from the software, but I cannot fax or copy an error message appears and States may not connect to the printer. MY Device Manager and IP address and printer Wi - Fi testing and diagnostic diagnostic all work well and find my computer and also do report no problem Firewall etc. I guess the program of upgrading hp had me use to get win 7 working with HP software solutions has a defect. I uninstalled the upgrade HP Software Download Center gave me and tried to install my original software I got with my printer when I bought it and it signals it is impossible to install the software under win 7. Yet once, I try to install the software version download full reports HP will modernize my HP solutions to work in win 7 and again once I get don't find it the above dll file and that it is necessary to make the installation work. So where can I get the correct version of the HPZIDR12. DLL VERSION 0.0.0.0. ?????

  I guess it's the library file of dynamic links that I need to get my HP software solutions to work in win 7. I have had some discussions with HP technical support and had 5 different technicians try to help me rounded up to 20 hours multiple msconfig takdowns etc etc and I have a program that does not work. What is a registry problem? I ALSO HAD A PROGRAM WHICH IS SUPPOSED TO CHECK AND FIX REGISTRY, FILES AND IT DOES NOT SOLVE THE PROBLEM.

  Please HELP ME AND maybe A COMPUTER GURU CAN GIVE ME SOME INFO ON HOW to SOLVE THE MYSTERY OF THE HP solutions SOFTWARE DILEMMA?

  SINCERELY,

  OWS

  Hey everybody. ID suggest trying the following steps to see if it solves the problem:

  Solution: re - register the MSIexec service

  1. In the Windows taskbar, click the Windows icon ( ), type run in the text box search programs and files and then click run in the top of the dialog box. The run window opens.

• offline activation code how can I get a when the site getactivated does not work?  MSG: failed to process your request. Please try again later.  Help!

  Activation code offline - how to do when the site: getactivated does not work?  MSG: Failed to process your request. Please try again later.    Help!

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• How can I get rid of the malware that does not allow us to go online for some reason any? Our computer is useless to the point.

  My husband had opened places an ad on Craigslist, when a pop up appeared on the screen to alert him to disable the software pop up advertising with a 1-855-453-2 * phone number 8. This pop up to continue and we cannot see anything online. Force Quit does not get rid of this stuff. Any suggestions are welcome.

  Thank you

  CArol

  < personal information under the direction of the host >

  If you use Safari, you can run it with the SHIFT key. This may also work in other web browsers. If it is not, disconnect the computer from the Internet and close the tab which produced the popup.

  (141261)

• Blue contours appeared and I can't control my iphone 5 s. I can't go to settings. I triple click on the button "home" and gives a message to go into settings and enter the password but I can't get to the settings. What does not work? Thank you

  Blue contours appeared and I can't control my iphone 5 s. I can't go to settings. I triple click on the button "home" and gives a message to go into settings and enter the password but I can't get to the settings. What does not work? Thank you

  The blue plan is switch control.

  s http://gettecla.com/blogs/News/15538916-what-is-switch-control-mode-in-apples-IO

  Triple click to get rid of him.

  "Siri to the rescue.  I said turn off the control switch. »

  Re: How to disable the switch control

  I don't get a request for an access code.  What is a school system?

  switch control

  Settings > general > accessibility > switching control

  R

• I can't get my updates. the Windows Installer does not work how to fix it

  I can't get my updates. and I can not install other programs. the Windows Installer does not work. How can I fix?

  http://support.Microsoft.com/kb/2438651#reso1

  See the above article, I suggest you use not Fixit, but it's your choice.

  For manually fixit it you follow the steps in the resolution.

  fyip

• How can I change the search engines if /searchreset does not work?

  I just upgraded to 23 FF, and it or some other setting changed my default Yahoo search engine. I want to go back to Google, which I think is the default value. Another thread of support was driven to https://addons.mozilla.org/firefox/addon/searchreset/, but that has not worked. I went in: config and Yahoo changed to Google on several lines, but it did nothing. I tried to change the searchreset.backup.keyword.URL and the keyword. URL, but they would not change the setting Yahoo.

  Not only is my default stuck with Yahoo, but even if I click on the arrow pointing downwards in the search box, I can not select a different search manually engine. The drop down menu shows me a list of search engines, but by selecting one of them has no effect. Help?

  Hello kirkpete, please try this: go to firefox > help > troubleshooting information > profile folder - "view folder", then a new window will open. in this search on a file named user.js window (it can be used to overwrite your custom settings). where it is present, delete or rename this file and then restart firefox.

  How to fix preferences that will not save

• How can I get rid of BetterSurf? Suggestions did not work.

  It does not appear as a plug-in or extension, although he has done it before I used the command line to remove BetterSurf directories (Windows Explorer don't remove them). AdAware or even MalwareBytes found the problem and still less removed. He doesn't appear in Add control panel or remove the list of programs.

  There is a "three minutes removal tool" that appears on Google, but I suspect that would just cause more problems.

  What should I do now?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• How can I get a plan if the page does not load?

  Whenever I click on the link to find a plan for the purchase, the page does not load. I just want to buy a plan! And I can't! What should I do?

  Hi Sara,.

  In case you are still unable to purchase online, you can contact Adobe sales team to place the order.

  800-585-0774.

  Kind regards

  Sheena

• CS6 bought the disk to another computer. I was wondering if I can download it on my new computer that does not have a drive without having to buy a new copy

  I bought CS6 disk for my computer a couple of years ago. This computer doesn't work anymore so I have a new but this computer does not have a disk drive. I was wondering if there is a way for my CS6 download on this new computer without having to buy a new copy. I still have the box and all the codes. Thank you

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• I don't want to use a password since I am the only one using my computer. How can I get rid of the password and does not have the locked computer?

  When setting up my new computer, I put a password so that the computer is locked. Now, I'm the only one using the computer and it's an embarrassment to have to put a password everytime I open my computer, even if it is not stopped. I know that there must be a way to get rid of the password. I would like to help you with this.

  See the link below:

  http://www.PCWorld.com/article/2015587/how-to-bypass-the-Windows-8-password-screen.html

• Why I can't install Windows7 on a computer that does not have a 64-bit processor?

  I tried to install Windows7 on an old desktop computer, but got an error message that says that a 64-bit processor is required.  So, if I can't install Windows7, what version of Windows I can use?

  Maurice

  HI Maurice Osborn.

  Old desktop computer consists of 32-bit processor called x 86 only. So you need support for Windows 7 x 86 to install on your PC. I hope that you have Windows 7 X 64 Media, it is not compatible with your PC. That's why you have this error.

  There are two types of media available X 86 and X 64...

  To use windows 7 x 86 Media for your PC

  Please check your PC meets the said requirements below...

  Windows 7 minimum configuration:

  Processor: Pentium 3, 665 MHz, Celeron, Pentium 4 1 GHz / Core 2 Duo 2 GHz

  RAM:
  512 MB (that's a lot still needs to get the installer running)

  1 GB, maybe 1.5 GB

  2 GB or more

  Graphics card:

  Embedded graphics, 8 MB memory card

  Integrated graphics, 64 MB of memory,
  at least drivers WDDM 1.0 (Vista), DirectX 9 capable.

  Map dedicated graphics, 128 or 256 MB of memory.
  WDDM 1.1 drivers (Windows 7), DirectX 9 and 10 capable.

  Hard drive:

  HARD DRIVE IDE, 10 GB
  Please post what size of hard drive, you got win7 working on!

  IDE or SATA HDD, 16 GB (32-bit) or 20 GB (64-bit) free

  Thank you..

• How can I recover data from a disk that does not open?

  It is connected to a USB port, it is turned on, indicated on the workstation dialog box and the wizard says that it works correctly, but no data can be retrieved. It is a 500 GB NOONTEC external drive.

  Hi Joe Barna,

  If please see this thread and follow the troubleshooting steps listed by Syed N.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-says-my-external-hard-drive-is-empty-but/b756d646-936a-E011-8dfc-68b599b31bf5?msgId=68f65ecd-096b-E011-8dfc-68b599b31bf5

  As long as these files are not damaged or infected by a virus or malware, there was no damage on the new computer. I think that the files could just be hidden or something like that. Just reply with the results of the steps listed above.

  I hope this helps.

• How can I remove modules - your advice to help does not work.

  Your Council says click on 'Tools' then 'Modules' and it then takes me straight to the Add-ons page. There is no option "Extension, appearance or plug-ins" that I can choose.

  To uninstall a possibly unwanted extension, please proceed as follows:

  1. In the Firefox Firefox window click on the top left and select Add-onsor, if the Firefox button is not displayed, click the Tools menu, and then click Add-ons.
  2. Once the add-on Manager has opened in a new tab, click the Extensions button on the left side of the window.
  3. You should now see a list of your extensions installed on the right side and buttons on the right side of each extension.
  4. To remove an extension of Firefox, simply click on the Remove button. You should see a message that informs you about the deletion of the add-on.
  5. Note that some modules require a restart of Firefox to make it disappear completely. To perform a restart of Firefox after removal of add-on, click restart now in the message.

  You can find more information about uninstalling extensions in the following articles:

  Disable or remove modules

  Remove a toolbar that has supported your Firefox or the homepage search

• How can I uninstall Media Player 12? It does not work.

  I would preferably completely uninstall Windows 7 and replace it with XP (I have a disc).

  Try to uninstall and reinstall via "programs and features" as per - http://www.mydigitallife.info/how-to-uninstall-and-re-install-windows-media-player-12-wmp12-in-windows-7/ see if that helps.

  There is a paragraph of this leave a link to completely uninstall it. I have not tried, cannot tell how good or bad, it works.

  There are a lot of free media players like VLC that work very well as alternatives.

  BUT before taking drastic measures, it may be worth the bother running convenience stores Media Player and see if they have anything detect. in "search programs and files" type "Troubleshoot" (without the quotation marks). In the list of results, click "Troubleshooting", click "programs" and run the wrong player media shooters see if they find something.

  Also run a SFC/SCANNOW checks if that detects and corrects errors in the operating system.

  (Must add even once, I never tried the deletion of WMP12, no idea how that it works or possible side effects.) If go you forward, he read attention in order to understand the process before you begin. )