How can I get digital lock to household?

Similar Questions

• How can I get digital signals (interface UART) with a microcontroller with NI USB-6008?

  I have acauired a few analog signals by A/D (3 channels). I put each scanned data on 3 digital output with a microcontroller. I want to see if it is possible to import these digital outputs 3 to a PC via a USB-6008? It's like the connection of the output to the digital input of the USB-6008 and import the 3 channels simultaneously to LabView? Do I need to use some other hardware like USB-8451 and connect the clock of the MCU to USB-8451?

  Saraydin,

  The digital I/o on the USB-6008 is a software program only, so unless your signals are rather slow, it probably will not work for you.  In general, the procedure would be to connect each signal to one of the digital lines on the map and then set up a digital entry into LabVIEW task to read the three channels.  If you use a device that has clocked by the digital i/o hardware, you then your input clock signal and use it as the sample for the task clock.  Here is a list of USB devices supporting DIO clocked by the hardware.  Also, there is an example that comes with LabVIEW, which shows how to do this.  You can get to it in LabVIEW by going to help > find examples.  When the example Finder window opens, navigate to hardware input and output > DAQmx > digital measures > Cont read dig Chan-Ext Clk.vi.

  The 8451 is specifically for I2C and SPI, and would be great if you try to make one of these protocols, but otherwise I would recommend the devices in the list I linked above.

  -Christina

• How can I get caps lock display to display in the bar when the button is pressed the task. It allows to show.

  Display of CAPS LOCK in the taskbar when the button is pressed. What HE show.why not now?

  Hello

  ·         What operating system do you use?

  ·         What is the brand and model of the computer?

  ·         If you are using a desktop computer, what is the brand and model of the keyboard?

  ·         Were there recent changes made on the computer before the show?

  You receive notification of Caps lock and Num lock ON or OFF on the taskbar only if the keyboard manufacturer's software has been installed. You must contact the manufacturer of the software.

  If you have the software already installed, but always the notification is not invited on the taskbar, then you can try to uninstall the software program and feature and put it back in the rear seat.

  Link: Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

• I'm on the renewal of the car, and I am responsible.  I just need a receipt.  How can I get a digital receipt of my purchase?

  I have an automatic renewal on and me are charged. How can I get digital reception?

  Hi christians80977884,

  Please see to print an invoice or a receipt of payment. Creative cloud for information on the location/print an invoice of Adobe.

  Let us know if you have any additional questions.

  Best,
  Sara

• How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  Settings > Notifications > Messages > display on the lock screen

• How can I get the COMPLETE serial number to display? This number shows except for the 4 last digits.

  How can I get the COMPLETE serial number to display? This number shows except for the 4 last digits.

  Hi Infogoddess,

  Thank you for using communities Support from Apple! If you try to find the serial number of your iPod touch or another Apple product, you can find information and the steps in the following articles useful:

  iPod: how to find the serial number - Apple Support

  Find the serial number of your Apple - Apple Support product

  See you soon

• How can I get the digital power meter?

  How can I get the digital power meter?

  I use a method similar to the example below to measure the market factor using the inputs of a multifunction data acquisition meter.  If the duty cycle is 0% or 100% for a given period, DAQ reading times out and returns an error.  In this case, I would get the digital state of the counter of entry so I can put as cycle to 0% or 100%.  I want to do it without knowing the digital port and line the entrance of counter... for example I would like to continue referencing DAQ/ctrX since I already have this information.

  The application uses an M series: PXI-6229 DAQ and LabVIEW 2011 to make a system customized for VeriStand.

  https://decibel.NI.com/content/docs/doc-12396

  For the moment I wired the block diagram to add a case structure to check the meter ID and string constants to set the identifier of digital input, as they share the physical connection.  As much as I can say that makes the specific code for the PXI-6229 (or any DAQ with only two counters that share connections with p2.1 and p) 1.4

  I have attached the VI sub.

  When the device is used with a different data acquisition, I can add the connection and/or separate control.  Looks like at least one will be necessary given that the meter can only detect the edges... I think it was the piece of information I needed.

  Thanks for your help!

• How can I get the string value displayed on a digital control defined for the relative time.

  I have a digital potentiometer to display relative time in increments of 30 minutes.

  I want to record the value displayed on the control string.  Unfortunately, when I use the "convert to decimal string.vi" number, the resulting string is just the value in seconds.

  How can I get the value as a string? (for example 01:30 for an hour and thirty minutes)

  Thank you

  Sean

  Hi Sean.C!

  M_Peeker's suggestion is a good thing.  A stage that could clarify things is that you must set the % t <%H:%M> format string entry.

  < br / > Kristen:.

• Caps lock seeing abruptly stopped visible on-screen. How can I get that back

  Caps lock seeing abruptly stopped visible on-screen.  How can I get that back

  Windows is not a caps lock indicator.  The indicator on the screen is provided by another program, provided by the manufacturer of your computer.  Computers Dell, for example, have a program called QuickSet which performs this function.  Other computers, such as eMachines, use a program called HotKey that is running in the taskbar near the clock.

  If it stop working, the program may have been closed (or maybe even turned off by someone else). A great troubleshooting step is simply restart your computer.  As long as the program is still installed, it must itself automatically restart (assuming nobody has disabled it).

• Help! For an assignment, I need to use InDesign 2014 to make a digital item. I have the CC with 2015. How can I get the version of 2014 for my Mac

  Help! For an assignment, I need to use InDesign 2014 to make a digital item. I have the CC with 2015. How can I get the version of 2014 for my Mac

  Sorry, I can not explain this. It is not sensible.

  Try going to your cloud creative desktop App. Click on the "gear" icon > Preferences > General. Sign out and then sign in using your Adobe ID and see if it looks different.

• How can I get my file of folio CS6 (digital magazine) to my iPad without an internet connection?

  Hi all

  How can I get my file of folio CS6 (digital magazine) to my iPad without an internet connection? I'll be in a place without internet connection and have yet to get my folio of the files from my laptop to my iPad to share with my clients. I looked everywhere but can't seem to find how to do this.

  Thank you!

  Depends on what you mean by part. If you want to put your folio on ipad of your customer, so they can listen to samples, everything they do is jack their iPad to your computer, launch content adobe Viewer and click Preview on the device in the folio generator Panel. This will push your folio on their ipad. Then, they can view content.

  If by hand, you mean... give physical files for you customers so that they can do (honestly I don't know what they would do with one file other than view folio it on the device), there is no way to do it.

• I'm playing my music, and I can't past THE digital Voltmeter geet! How can I get passed, so I can play my music and add it too 80th birthday slideshow from my mother-in-law!

  I'm playing my music, and I can't geet past THE DRM! How can I get passed, so I can play my music and too add slideshow from my mother-in-law 80th Birthday Party! DRM

  Where can I find, DRM Reset tool?

  I'm playing my music, and I can't geet past THE DRM! How can I get passed, so I can play my music and too add slideshow from my mother-in-law 80th Birthday Party! DRM

  Try resetting the DRM tool.
  Run this program as an administrator.

• How can I get my RAW ready for Facebook (Thread locked and redirected by mod) photos

  I took about 500 photos of a pow - wow and I used the FIRST. I must have these photos on the Facebook/The Web soon. I used Illustrator to export in JPEG and made smaller for the web, I even tried exporting to PNG but no matter what I try, my photos are blurry!  They look so amature and it's very irritating! Can someone help me please?

  Please answer this question on the next thread

  How can I get my RAW ready for Facebook/The Web photos?

• How can I get rid of the widgets screen?

  Since the upgrade to iOS 10, a widget screen when I start my phone.  How can I get rid of this sort my identification of access/contact code screen appears when I turn on the phone?

  Thank you.

  With iOS 10, if you see the widget screen by sliding the lock screen is normal and how the new iOS.  It is more action 'slide to unlock' available in iOS 10.

  To operate the unit and go directly to the password entry screen (if you are using a fingerprint recognition), press the home button twice.

  In iOS 10 from the lock screen, are the only gestures by scanning

  1. slide from right to left to bring up the camera

  2. slide left to right to bring up the widgets screen (from the widget screen, swipe down to search for).

• How can I get the 6 digit number to associate my watch.  It doesn't give me a 5-digit number?

  When I try to manually associate my watch it only gives me a 5 digit number, but not the number 6 to complete the pairing.  How can I get the 6 digit number?

  Hello

  When pairing manually, you must press the name of 5 digits on the screen of your iPhone (when he shows the same device name that is shown on your watch, after typed it on your watch's 'i'):

  

  Your watch then displays a six-digit code, you will then enter on your iPhone:

  

  More information:

  Set up your Apple Watch - Apple Support