How can I get HP 3050 multifunction Scanner to work with Windows 7?

Similar Questions

• How can I get my Canoscan n670u scanner to work with Windows 8?

  Hello

  I've upgraded from Vista to Windows 8 and was happy to see Win8 instantly detected my trusty Canoscan n670u scanner and recognized as a connected device. It is, therefore, correctly identified, in Device Manager, I tested the scanner via Device Manager and diagnostics is well spent - it buzzed away, and the screen displays a message about successful test. Large.

  However, when I use the Wizard Windows Fax Scan & and click new scan, I get the message no detected scan.

  Whuh?

  I tried to acquire an image using Onenote. The scanner passed through calibration, apparently successfully, then as he was about to start scanning, came to a stop with an error message.

  Help! It's a good piece of hardware. What I don't really understand not is Win8 apparently automatically detected and installed the drivers for it, but will not let me scan anything. ???

  Any suggestions?

  AH HA!

  He fixed the this morning.

  I have downloaded the Vista version of the "Canoscan Toolbox" software on the Canon's Support site (http://www.canon.co.uk/Support/Consumer_Products/products/scanners/CanoScan_series/CanoScan_N670U.aspx?type=download&page=1), installed and run the Compatibility Wizard. Success!

  Scanner works fine, although the software seems to forget default each I close.

  I don't care.

  Thanks for your reply though - if someone else asks that you can point their to this!

• How can I get Canon CanoScan N676U Scanner to work in Windows 8?

  How my old Canon CanoScan N676U Scanner can work under windows 8?

  Hello

  The scanner can run on a computer that Windows 8 is there is compatible drivers from the hardware manufacturer. The manufacturer of the printer is responsible for creating compatible drivers.

  You can access the canon website to check if there are compatible drivers Windows 8.

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_n676u

  Refer to this article to know how to install a printer.

  Install a printer: http://windows.microsoft.com/en-us/windows/install-printer#install-printer=windows-8

  In addition, if there are drivers for Windows 7 you can install the driver in Windows 7 compatibility mode to check if that helps.

  Make the programs more compatible with this version of Windows: http://windows.microsoft.com/en-us/windows-8/older-programs-compatible-version-windows

  Response with the State of the question and we will be happy to offer you our help.

• How can I get my Visioneer 8700 scanner to work with Vista

  My scanner is compatible with XP on Vista I understand it is not supported by Visioneer. However, I feel that there are ways around the problem. Help, please!

  Hello

  the manufacturer has written drivers for their products, not microsoft

  Here's what the drivers they have

  http://support.Visioneer.com/products/8700/default.asp

  It stops at XP

  We cannot do something that

• How can I get my Dell 720 printer to work with Windows 7 on a Dell Inspiron 6400, because I can't find the correct driver?

  My Dell Inspiron 6400 'Windows Vista' has been updated for "Windows 7" and the Dell 720 printer has stopped working.

  There are possible solutions here...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/cannot-get-Dell-720-printer-to-print-Windows-7/ab2cec8f-B267-4654-9f5f-9e9a48eac1c0

  Tricky

• How can I get my xbox 360 controller to work with my computer... Im running the 64-bit version of Vista... my computer does not even recognize the hardware?

  How can I get my xbox 360 controller to work with my computer?... I can't even recognize the hardware? Im running Vista 64 bit on a quad core rig any help would be appreciated... Thank you

  Hello Ghostdogaln.

  How do hang you the controller?  You must either use a * wired * controller, or use a wireless controller with receiver game Xbox 360 for Windows.

  If you use a wireless with a Play and Charge kit controller, it will not work as long as the USB cord only actually plug into the battery for the controller itself. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• How can I get the age of Mythology to work on Windows Vista, every time I put the disc in the computer installation screen dosnt pop up and nothing happens

  Moose title: How can I get the age of Mythology to work on windows vista

  every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer

  Hi rew55545,

  (1) is this problem limited only to the age of Mythology disc?

  (2) what version of the game you are trying to install?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  
  Method 2: run the fixit available in the link below to resolve any problems with DVD player.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• I can't get the charger 10 elements to work with Windows 8.1.  Is there a solution?

  I can't get the charger 10 elements to work with Windows 8.1.  Is there a solution?

  Never mind.  I thought about it all.  Thanks anyway.

• How can I get a Dell A920 printer become compatible with Windows Vista?

  I have programmed a Dell A920 to print from my laptop Windows Vista printer.  It worked, but when I try to print something I get an error message indicating that the printer is not compatible with Windows Vista.  How can I get compatible?

  Hello

  Download and install the latest Dell Vista drivers;

  http://www.Dell.com/support/drivers/us/en/19/product/Dell-920

  See you soon.

• Can't get HP Desk jet 722C to work with Windows 7 64 bit

  I have an old HP Deskjet 722C I have used successfully for years, most recently with Vista Home Edition 32 (as well as with my XP laptop). I can't work with Windows 7 64 bit. There is no Win7/Vista drivers on the HP site for download. Bed in installs but does not print. The printer is found and installed, but nothing comes out when I try to print.

  Note that I have a parallel to USB converter on this printer, I have used / use with XP and Vista successfully.

  I see a lot of threads print say download the driver and run it in 32-bit mode to Vista. Since there is no driver to download I can't do. Convenience store is empty as well. Any other suggestions.

  Thank you

  Hello
  Welcome to the Microsoft answers site.
   
  HP C 722 Desk jet is not compatible with Windows 7 64 bit, then I suggest you contact the manufacturer.
   
  You can also check the compatibility, here is the link:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/b9ec9fc0-8121-48af-9d9d-8ee4c9f8c7fb

  Thank you and best regards,
  Azam - Microsoft Support

• I can't get my 4110 fujitsu scanner to work on windows 7

  I can't get my fujitsu scanner 4110 to run on windows 7 appears as unknown device, drivers not found I have trried on fujitsu support site, has no drivers for windows 7,

  I guess that if Fujitsu do not a W7 driver for their own scan, it is probably not a.

  I found that can help if you have the qualification of W7 version, where few people apparently got the 4120 (which has either a W7 driver) running in XP mode - http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/how-to-install-fujitsu-fi-4120c-scanner-on-windows/f38cc5ec-9a2b-47b5-bca4-a7096d6c3086?page=1

  As in:

  "2. I got this scanner works in Windows 7 64-bit edition via Windows XP Mode."
  No I didn't install any driver for the scanner on the base OS, and when I entered the windows XP mode, until I clicked on the menu USB and attached the scanner, I installed the latest Windows XP TWAIN of Fujitsu package. Reboot the machine virtual and then fixed the scanner. He finds the drivers and fortunately is scanning now. Fully functional. " and similar.

• How can I get the addon "Colorful tabs" to work with the addon "classic restaurateur theme?

  I have the colourful tabs addon. But after the addition of the addon Classic theme restaurateur (to retrieve my tabs on the bottom), the color tabs addon does not work. My tabs are now all the same color work addon of the tabs colorful so that all tabs are different colors, so to say to which tab is the one that you use the right then the active tab puts a thin line on the tab bar of the same color as the active tab. So if you have 5 tabs open and they are all the diffierent colors, whether the tab your page in the Green, then you will see a thin green line on the screen (sort of like a horizontal border line). I can see a colored line (different from the color of all the tabs are now) under the tab bar. If I click on a different tab, change the color of the line. I can't tell what color my tab SHOULD be if it was just work, so I know that this addon is installed and working, but not to the poster for a reason any. Is it possible to fix this?

  I'm under Win 8.1 (64) and 30,0 FF. Thank you

  If you only use the extension of the CTR for the tabs at the bottom, then there are other ways like code in userChrome.css or an extension like tabs on background that might work better.

  • https://addons.Mozilla.org/firefox/addon/tabs-on-bottom/

  You can move the tabs on the lower position, just above the navigation area without the use of an extension cord with code to userChrome.css that basically, you just give the tab bar a higher value of - moz-box-ordinal-group (most toolbars have a default value for - moz-box-ordinal-group: 1 to show them in the order of DOM).

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #TabsToolbar{-moz-box-ordinal-group:10000!important}
  

  See:

  • [997353/questions/997353] How can I put the back below the navigation tabs?

• How can I get Age of Empires 2 to work on Windows Vista?

  I want to play the old game on my current computer (which extends from Vista).  The installation went well, until 100% is reached.  A screen will appear that reads 'Updating System Settings'.  Any thoughts?

  Hello

  Follow these steps:

  Step 1:

  I suggest you to check if the game is compatible with Windows Vista.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Step 2:

  If the game is not compatible, you can try to run the game in compatibility mode and check if it works.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  See also: How to solve the problems of compatibility of programs in Windows Vista

• How can I get my HP Deskjet f2200 printer work for Windows 7.

  I recently had to buy a new PC, but my HP Deskjet f2200 printer does not work for Windows 7. He said that it is only compatible with Windows 2000, XP and Vista. I think I need to download a driver but which. Also, how do these things? Can someone help me please? Thank you.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• My version 10.4 of Mac is not compatible so I deleted Firefox completely. How can I get the old version (one that works with my system) back?

  I have a Mac OSX 10.4.11. I installed the new update of Firefox and when I tried to open it, he said that it was not compatible with my compatible with my computer. I deleted it and now I would like to know how to install the old version of Firefox - or any version that works with my system. Thank you!

  Please change the download page for other people do not have this problem. He said that the new version works with Mac OS 10.4 and more - I checked before downloading. I'm happy, there is a solution, but the download page does not. Don't use other people waste their time like I did.
  When you download 3.6.24 new version downloads right thereafter. I closed it, but this looks like a glitch.
  Thanks again for your help and to continue to support the old version. Firefox is a great browser.