How can I get into the BIOS in Portege M200?

Similar Questions

• Toshiba Satellite S50-B-12Z - how can I get into the BIOS?

  Hey, I have a new laptop - Toshiba Satellite S50-B-12Z.
  I want to knpw how to enter the BIOS?
  I have win 8.1

  Ty

  Press on and hold (or type) the key F2 when you power the machine on.

• I can't get into the bios

  When I restart my laptop I have the HP logo with the small "leak of press to enter the boot menu. Usually, when I press ESC at this stage, it gives me options to go into the bios, change the boot order and enter the Recovery Manager.

  But earlier when I try to do it, by pressing esc it will start in the windows Boot Manager, giving me the boot options in windows or to do a test of memory and I don't see any option to get into the bios!

  Laptop model: HP Pavilion dv6 3030ee!

  OS: W7Ultimate Bit

  Please someone help me with this problem!

  Thank you

  Finally I solved it! I just took the battery and put it again! then my cell phone is ok

• PXE - E61: media test failure on 3500 Portgege but can't get into the BIOS

  I canoe get into my BIOS menu.
  I tried all the keys (ESC, F1, F2, delete, etc), but then I get the message: "PXE - E61: media test failure, check cable for.
  "PXE - M0F: PXE ROM of output. I tried everything, but I can not even access the BIOS menu.

  Turn on the laptop and hold ESC, then press F1 when prompted. By pressing F12 at startup should give you a start menu. (It's in the user manual)

  The PXE error means its trying to boot from the network, because it can not find an OS on the HARD drive.

  Test the HARD drive by using a HARD drive test. The Advanced test in Hitachi DFT is good. (google is your friend)

• How do you get into the BIOS of 10 Latitude - Dell support instructions are bad

  The Manual:

  My problem with these instructions:

  1. There is no blue logo, it is black

  2 external USB keyboard connected to the table not recognized at all

  3 external USB keyboard connected to the docking station recognized after only 8 Win rises

  4 virtual keyboard not available until after that Windows 8 rises

  It seems that these may need to be revisited...

  DRM for suggestions

  D

  Hi Rick D,

  Try the following steps to get into the Setup/BIOS system:

  • Turning off the tablet.
  • Unplug the Tablet from the docking station.
  • Press the Power button to turn on the system.
  • Until the Dell Logo appears, immediately, press and hold the Volume button down until it displays the system configuration screen.

  I hope this helps. Do not respond if you have any other questions.

• Elite 8000 LTS: can ' t get into the BIOS to change the boot order

  I want to change the boot order to allow booting from the ISO disks.

  Keyboard F10 doesn't bring up the BIOS screen, and the machine starts just in Win7.

  Any suggestions?

  Thank you

  What works is by exchanging the mouse and keyboard usb for mouse and existing keyboars.

  Looks like that the installation of Win 7 bothered recognition of USB designs.

• Tecra8000 - keys to get into the BIOS?

  Hi all, I am German, sorry for my English!

  I have a tecra8000 with win2000, but I lost my password, I'll install windows xp home edition now, how can I get into the bios. Wich keys must I push wen the computer is in boot mode?

  Thank you

  Leo

  Hi Thomas,

  The normal to access the BIOS path will be to press ESC then F1 during startup. This will give you the BIOS menu. Some laptops use ESC to show the progress of the POST and F2 to enter the BIOS menu.

  F8 will allow you to start in safe mode.

  F12 to select boot device (disk, CD, etc.).

  HTH

• Portege 7200: Hot to get into the BIOS?

  Hello

  How is it possible to get into the BIOS in Portege 7200?

  Thank you!!

  Harry

  Hello

  I found the same info. Press the ESC key just after switching on the device.

• T530: Cannot get into the bios

  Hello.

  The issue of this link does not seem to be solved with the last update of the BIOS (or it's a similar question).

  I'm running 2.04 and since I have set to UEFI boot only I can't get into the BIOS. When I press Enter to interrupt normal startup the screen goes black, it seems to interrupt the boot but nothing looms on the screen. Starting continues after a few seconds (I guess that after the time-out of the screen of the interruption).

  There seems to be a problem with the code modesetting, because if I connect to an external monitor to the VGA port everything works correctly.

  Note that what is happening with optimus, as well as with only the active Intel card.

  Thank you.

  This seems to be fixed with the last BIOS update (2.07).

  Although a little more comments would be welcome.

  Thank you.

• How can you get into BIOS on a Satellite 320 CD.

  Hi my name is steve, I was wondering how get you into the BIOS on a satellite 320 CD. Because it's my first format at the top of a tower. Done a lot on the office laptops just never. As some fool tried to do before me and distroyed it. Now the only thing that happens is when the toshiba logo disappears this message appears, INVALID SYSTEM DISK, REPLACE THE DISK, THEN press ANY KEY. It allows to run Windows 98 and it worked great for what age there. Hoping to put XP on it, but its only got a small hard drive (4099 mb). So will hand 98 on it until I get a bigger hard drive. Only need to teach my daughter how to respect a laptop. I want to get into the BIOS for the format. No instructions on how to enter the BIOS would be great, because I'm good from there. Thanks in advance for your help.

  Hello

  You suggested that you want to enter the BIOS to format the HARD drive. Very strange.
  However, if you want to boot from the CD so you can also use the C button immediately after the power button.
  The laptop should boot from the CD of Win98. The installation procedure contains a HARD drive format option.

• I have windows Vista Sp2. Cannot get into the BIOS. Computer does not start on the desktop. What can I do?

  Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

  Someone at - it ideas. Thank you.

  Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

  Someone at - it ideas. Thank you.

  Don't ned to start the Office before accessing the BIOS...

  The following tutorial is about changing the bios boot sequence.
  #1 step is how to get to the BIOS window. THIS show be what you need. You can skip the rest if they do not apply to you.
  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Cannot get into the BIOS on my Portege R700

  Hello friends,

  I have laptop Portege R700-1321.
  1 year a go, I was updating my version of BIOS to 2.20 and after that I have cannot get into the BIOS!
  try a passer-by but noway :(

  When you press F2 after you restart the computer nothing add and put it back again.
  try to change ro F10 boot order but still just restart :(
  I need to change the boot order to install the new OS fresh and of course my BIOS setting.

  Please help me.
  If any body had a same problem or know how to fix it :(

  First of all you n t need to change the boot order in the BIOS if you want to reinstall the new system.
  You can press F12 all turn on/off the unit.
  Then a menu should appear where you can change the boot device.

• Cannot get into the bios of the start screen.

  Well I had run into trouble with my video card, and it had to be replaced. Before I do that but I was invited to try a system recovery to get rid of any possible program that was at the origin of defective symptoms of a video card.

  Well, I replaced the video card and everything has been fixed. But... because of the recovery of the system, some of my settings changed in Bios is returned back to default. I remember specifically in the Bios to disable the action keys (Fn + everything related F who did something).

  Problem is now I can't return to the Bios to change the settings once more.

  In order to dispel some of the suggestions more simple I tried already:

  Using another keyboard (allows me to enter the Setup program, reinstall system, diagnostics, etc. very well but not Bios)

  Unplug everything in the back, but the monitor and keyboard

  Erased from the memory CMOS, which led me to a screen saying that my Bios is set by default and to go to the configuration, press F10. But by pressing F10 led me to the single configuration screen and couldn't get into the BIOS.

  I carefully searched the internet to find answers for this problem, but I really hit a dead-end.

  I want to say I know that I've changed before setting on this computer it's just that I don't remember how. I mean I tried F1, F2, Del, Ctrl + Alt, and everything inbetween for shortcut keys enter the BIOS nothing helped.

  Thanks in advance for your reply eagerly to receive a response.

  Oh and I have a HP Pavilion Slimline s5260f, if that helps anything.

  Well fiddle with stuff I have solved my problem. Thing, it's actually, I couldn't have what I wanted through the BIOS screen. I remember he made on my friends computer to get rid of it, where their BIOS had more options.

  As for anyone with my problem (hit accidentally the Fn and the sleep button) I recommend that to go in Control Panel Power Options - then select doing nothing to hit the Sleep button.

• Cannot get into the BIOS on my Sat A30

  Hi all

  I have problems to enter the BIOS. I heard when I want to get into the BIOS I have to press the ESC key when Toshiba logo is shown in the startup.

  But nothing happens!

  Could someone help me?

  Sammy23

  Hi Sammy23
  That is right. It's actually the ESC you press. But there is more to know. During the time where appears the Toshiba logo, that represents about 1.5 seconds or so machine "listens" for the ESC at the beginning.
  Means that you have to be quick like a cat to press ESC. I usually press ESC several times all the way to the market (until the Toshiba Logo is displayed). Try this. Another way to get into the BIOS uses Toshiba HWSetup (looks like a key any) in the in the Windows Control Panel. You can access almost all the parameters of the BIOS from there.

  BR

  Tom

• Satellite Pro 6100: cannot get into the BIOS and does not start

  I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

  Press ESC or F8 before to turn usually results in fast beeps sounds.
  Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

  Apart from that I can't really do nothing at all.
  I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

  Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
  I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

  Suggestions?

  Hello

  I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.