How can I get windows vista to recognize ipad
When I plug my Ipad in the slot usb (one of them), itunes starts and recognizes the Ipad, but Windows Vista does not (my computer). It used to and now it does not work. Were there a windows update that may be responsible for this? If this is not the case, how can I solve this problem?
Hello
You can check the link below: iOS: device not recognized in iTunes for Windows: http://support.apple.com/kb/TS1538
For assistance contact the apple support: http://www.apple.com/support/
Tags: Windows
Similar Questions
-
How can I get windows vista sp3 on windows vista sp2?
How can I get windows vista sp3 on windows vista sp2? I need this to start school as soon as possible. I have no idea what I'm doing
SP2 is the latest service pack for Windows Vista.
-
How can I get windows xp to recognize a new disk of 1 TB sata hard?
How can I get windows xp to recognize a new disk of 1 TB sata hard?
Hello NavarroIT,
In addition to the previous comments, I have link for HD is not recognized. It is an external drive. However, without knowing the manufacturer of your hard drive, you will need to check on this end. You may need to format the disk first. I hope this helps.
Microsoft Answers: External hard drive
-
How can I get windows vista? I get a message that PC is not supported by the recovery disks. Windows vista Home premium HP pavilion dv9310us
Hello
This recovery software is part of the process of HP.
Contact HP support
http://WWW8.HP.com/us/en/support-drivers.html
Or ask in the Forums of HP's Support.
http://h30434.www3.HP.com/PSG/
See you soon.
-
How can I get Windows 7 to recognize my NAS drive as a file server?
I just bought a new desktop computer with Windows 7 (the first time I used it at home). I have three drives NAS; one of them is an of Maxtor Central axis. I use the Central axis as a file server, it has Word, Excel and other Office files in addition to my music library and a handful of videos. Whenever I try to open a document, say Word, Windows 7 does not show the Maxtor under my network. It shows one of the other drives NAS (Iomega). When I right click on the network, click "Open in a new window", I see the Maxtor drive. However when I click on it, Windows will open Windows Media Player. I see only three songs, which aren't even mine; I think they were samples placed on the disk by an application.
Other machines on my network (a computer laptop PC and Mac) continue to be able to see the of Maxtor Central axis.
I can open my documents giving the fully qualified network path "\\Mca-054e16\Public", but it's a pain. I can't map a drive letter for the drive; I just get the small circle who constantly.
How can I get Windows 7 see Maxtor Central Axis like a file server and not only a media server?
Thanks in advance for any help that anyone may be able to provide,
Nolan
Hello
· How do you set up the network?
· Have you used a Maxtor software?
The Seagate knowledge base indicates that his NASwas released before the release of Windows 7. Therefore, it has not been tested in this environment and is not supported by Technical Support. http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=211931&NewLang=en&HiLite=Maxtor+central+axis+Windows7#note
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
How can I get Windows Vista Home Premium 64-Bit installed on Windows 7 Home Premium 32 - Bit?
I decided to install Windows 7 on my computer for the 30 day free trial, but am now regretting it. I don't have the money to buy the product officially, so I want to reinstall my windows vista. I have the drive, but when I try to install the computer says that this version of windows is not compatible with it. How can I get my Windows Vista to install?
Also, I currently have windows 7 Home premium. It is a 32-bit operating system and is running on Service Pack 1. The version of windows that I am wanting to return is Windows Vista Home Premium 64-bit.
I can't make the method for using the windows.old as my uncle decided to remove after installation of windows. I have 13, but even, I knew it was a bad idea. In any case, I would really help with this question.
Ranging from 32-bit to 64-bit is a single proposal for a NEW facility.
You can boot from the DVD and erase your old installation (wipe, from scratch, all not saved disappeared and everything must be installed manually - including drivers for hardware devices and software you have installed now) and install Windows Vista x 64.
-
How can I get Windows 7 to recognize a (old) HP Scanjet 7400c as a fax
Original title: HP Scanjet 7400 C
Is there anyway to get Windows 7 to recognize a (old) HP Scanjet 7400c as a fax? I can't find a driver.
Thanks in advance.
Hello
As OEM HP is responsible for the good operation of the printer and their
drivers provided. Check with HP support, their documentation online and
drivers and ask in their forums.Good luck, you need to update or reinstall the latest driver. If
There is no trial versions of Windows 7, the most recent available.Drivers for Scanner HP Scanjet 7400c & downloads<- set="" to="" your="">->
Windows
http://h10025.www1.HP.com/ewfrf/WC/softwareCategory?Product=59553&LC=en&CC=US&DLC=Scanner HP Scanjet 7400c support & troubleshooting
http://h10025.www1.HP.com/ewfrf/WC/product?product=59553&LC=en&CC=US&DLC=en#.HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Solve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsSolve printer problems (Windows 7)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Open the printer (Windows 7) Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
How can I get Windows Vista to stop the shortening of long file names?
I copy the files with long names in .zip files. Whenever I drag a drag the file to .zip (also with a long name) file, it renames the .zip file in a much shorter name. This only happens on my computer, my wife can perform the same task that I'm with her computer, and it won't rename the file name. We're both under Windows Vista. Is there a way I can get to rename the files? Thank you!
Hello
Did you change your computer?
I suggest you to check the status in safe mode and perform the clean boot and check.
Method 1:
Advanced, including safe mode startup options
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Method 2:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 3:
Create a user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
The names of files and file name extensions: frequently asked questions
-
How can I get windows vista software because my laptop got crashed last month?
I don't know exactly the problem arised in my pc
I think my pc got hit by the virusthe main problem to present all the details on my vista is
I bought my the Australia tour, which was just bought by my friend
I wil submit my details after having contacted himPlease send me a solution
my lap top is to thoshiba
in India, service center is not available for this company
I have mail them
waiting for positive responsethanking you
Fordhttp://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Try this:
Toshiba Recovery:
To access the recovery partition Toshiba, powering the laptop. Press 0 (zero) key and turn on the laptop. Keep holding down the zero key until the TOSHIBA logo, which is where you should start to type the zero key repeatedly. Stop if the device emits a sound signal or when the TOSHIBA logo disappears. The screen should light up * MODE of RECOVERY of HARD drive * for a fraction of a second, and then load the Toshiba Recovery program directly from the hard drive.
Note that this clears all data and reload all the software factory default. Be sure to back up all your important personal data beforehand!
You can also make recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are in service again.
They will tell you how to do this.
Every computer manufacturer has their way of doing recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
Save all data, because it will be lost during a clean installation.
See you soon.
Mick Murphy - Microsoft partner
-
How can I get windows vista to lock mode?
I am using windows vista ultimate and for some reason, it keeps happening in blocking mode and displaying the login screen after about 1 minute of inactivity. Please read the following and do not waste my time with useless answers, I've seen tons of those on the Microsoft support site. I have all my power options set to 'never '. I don't have a selected screen saver. To clarify what I put in power options, display is set to never turn off. Cover, button / stop and sleep options are set to 'status quo '. Turn off the HDD is set to never. In power, the options are set "never" or "status quo". If anyone can help, I would really appreciate it. And once again, if you do not have a solution, please do not respond.
Hello
Control Panel - power - on the top left Options - require a password on Wakeup - check do not require a password
Also right click Desktop - Customize - screensaver - disable the log on the summary screen - apply / OK.
Do this even if you do not have a screen saver. If it is unchecked then check and then go back and
Uncheck the box.You might also have something in the Advanced Options on your power Plans.
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
How can I get windows 8 to recognize my hard drive recovered from xp?
I have connected a recovered hard drive (Western digital) outside my computer crashed, that was a win xp to another computer running windows 8. The new computer doesn't recognize at all. Nothing does show up as an extra hard drive. There is in fact no answer I can see at all. Scary is as I said this is a new computer and I'm not at all familiar with where to find anything. I have to go to 'help' to even find the control panel I am as unfamiliar with it. I would like to import all of my pictures and documents from the old hard drive. Any help please?
Thanks for posting your solution in return. Would you mind mark your message as response? -This could help others facing the same challenge... Thank you
See you soon
LZ.
-
How can I stop windows vista without updating the updates
How can I stop windows vista without updating the updates because it affects my computer in error mode and I have to restore to get vista to startup after I reopen it later
Hello
You can change the settings for windows update to check for updates but let me choose whether to download and install them.
Change how Windows installs or notifies you of updates
You can also check in the update to the update history recently failed, double-click the update to get the error code and let us know.
See the Windows updates are installed
You can also read the following article to reset the Windows Update components and check.
-
Original title: the file format of external hard drive is the RAW and not NTFS. How can I get Windows 7 to read RAW hard drives without having to format the hard drive due to important work on this subject?
I put the hard drive on an XP and Vista machine and can read the hard drive, but not with Windows 7
Hi Zling,
It works on other OS? When did you finally read the disc and with what OS? If you can read the drive and make a backup of the data on this subject, I you suggest to backup the data on the drive and then put it in using the NTFS file system.
I hope this helps! Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Have recently updated mobile wifi, how can I get my printer to recognize my new wifi?
Have recently updated mobile wifi, how can I get my printer to recognize my new wifi
Original title: mobile WiFi
You must be a little specific (brand, model, W7 version etc.) to get a helpful response, I think. Then someone with a similar configuration may be better able to help.
You may be better to ask the support of the manufacturer of the printer wireless itself. However, this http://windows.microsoft.com/en-gb/windows/install-printer#install-printer=windows-7 and its related links gives the general idea.
-
Original title: multiple monitors
I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?
Hi David,
Thanks for posting your query on the Microsoft Community.
I suggest you refer to the Microsoft Help Articles below and try the steps mentioned.
Check out the link:
http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors#1TC=T1
You can also check:
http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
Maybe you are looking for
-
Why does texts received iMessage that email to another person I SMS?
When I send text messages with my iPhone, another person will receive it as an email. What can I do to prevent my iMessage texts received that email to another person?
-
Error 646 when installing updates in windows Vista
Hi, I need someone to help me on this problem while trying to install on my Vista windows updates, I am constantly the error code 646... I tried to install them manually as well, however without much luck... can someone guide me, please? Thank youAji
-
Change and direction of the lock of App?
Hey guys,. I searched extensively, but have not been able to find an answer to this question (perhaps because the answer is NO). I would like to run my application in guidance mode 'auto', but when the user reaches a specific screen, I would like to
-
Why can't I download and run the software xm2go music manager on windows 7
installer says that it will not work on Windows XP or Vista 64
-
Smartphone blackBerry 8800 to "BOLD" upgrade
email does not work after doing the transfer using office