How can I get WIndows8 TouchSmart to boot from the recovery disc

How can I get WIndows8 TouchSmart to boot from the recovery disc? With the recovery in the drive disk when I do a reboot or stop and start it does not read anything from the DVD player. My computer is a HP TouchSmart 23-D160QD.

@AirForce9731,

You may need to change the boot order to boot from the DVD drive first.  The steps to do this are in the document below.

http://support.HP.com/us-en/document/c00364979

These are recovery disks made by the recovery discs sent by HP?  They will not work in a different system (you will receive an error message), but you are able to get the boot floppies in a different system?  They should be able to start up to a point where the error message will be displayed.

Tags: HP Desktops

Similar Questions

  • How can I configure Satellite A300-148 boot from the recovery partition?

    Hello

    I had some problems when trying to install MAC - OSX, for her, where the partition table is deleted, then I retrieve the entire score as it is, but I can not start in any case.
    Then I decide temproraly install another copy of vista drive Vista (not the partition), then set up my laptop to boot from the recovery partition and reinstall the good copy.
    My problem is, it's all here, the only problem is, I need to configure the system to boot from the recovery partition.

    My device is:
    Satellite A300-148

    Thanks to the device.
    Ahmed.

    Hello

    If you have already changed the partitions of HARD drive and deleted files from the HARD disk, then your HARD drive recovery is too bad!

    But to make sure that the HARD drive recovery is not possible please press F8 immediately after the power of the laptop. Usually a start menu should appear and you should be able to choose the option called fix my computer. Then you should be able to choose recovery option.

    But like I said that this is only possible if your HARD drive was not formatted!

    If you have formatted the HARD drive and changed partitions then you will need a Toshiba DVD recovery that you have not because you didn t he create at the beginning. Is this good? Well, then you must order the recovery DVDs if you want to retrieve the laptop to factory settings.

    Welcome them

  • How can I get network connection when booting from the usb key or dvd

    Computer: HP Pavilion P6-2450eo

    Secure boot disabled

    Legacy Boot enabled

    Thruogh F9 I can boot into uefi since a key USB and DVD mode, but I can't seem to program loadet network connection. I tried with 13.04 Ubuntu, Linux Mint 15 and Boot Repair - all with the same result.

    How can I get the programs get started with network connection?

    On thanks in advance!

    poul1304

    Please check that the programs (Ubuntu, Mint, Boot-Repair, etc.) that you attempt to use it, press the controller Atheros AR8161L gigabit ethernet in native mode. Not all operating systems and software are supported each otut device or the network configuration of the box. Several times, drivers must be loaded or injected into the operating system for a device working properly.

    Please send Bravo

  • I have photoshopCC, but some how I get pop ups saying that my path for cs6 is expires, and then I buy and get a licience no, well I have not because I have a year of photoshop and lightroom CC. How can I get rid of this message from the trial please my

    I have photoshopCC, but some how I get pop ups saying that my path for cs6 is expires, and then I buy and get a licience no, well I have not because I have a year of photoshop and lightroom CC. How can I get rid of this message from the Marie trial please

    Go to Photoshop forum

  • How can I configure my computer to boot from the CD Rom drive

    I have Windows 7 home version and I have a problem with booting from the cd rom.  I did a cd bootable for a work at home job, but it will not work properly.  It works fine on the desktop of my sister, but not my laptop.  What is happening is the CD loads when I restart my computer, but then it goes to a black screen and just stays there until I have eject the CD.  I can hear the CD running, but I get nothing after the initial splash screen.  I have reset the bios to make sure that the CD-Rom was placed up in the boot parameters.  Any ideas why this CD will not completely loaded?  Thanks for any help you can give.

    Gayle

    Please note, in order to install Windows 7, you must have a DVD player, if you have a CD-ROM drive, which will not work.

    To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

    http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  • Can not boot from the recovery disc - 0x000000D1 Driver_IRQL_not_less_or_Equal

    original title: cannot boot from the Vista recovery disc

    A real problem. Vista is prompting me to boot from my recovery disc and allow the repair of Windows. However, when I insert the disk it shows loading Windows, but once he starts to launch I get the BSOd with the "Driver_IRQL_not_less_or_Equal" error report with the error code Stop 0x000000D1. I searched on advice but all I can get into the repair mode, but I can't. F8 does not work in safe mode. Week last ChkDisc has run on every start and yesterday I received a number of parts of Vista won't load does not with error reports. Today, it started with Windows can not load the warning and instructions for use the recovery disk... I'm in a loop as I cannot cross the BSOD! Help please

    Mick

    Computers are strange animals. After my response to you, I had another attempt to go beyond the blue screen. Hey hop this time my computer decided that he had enough rest and proceeded without delay to start and I would like to action, the recovery disk. There then reinstall Windows Vista and am now to a new computer! It's time to move to Windows 7! The only thing I did yesterday was to unplug my printer to my laptop!

  • How can I stop my Vm to boot from the network?

    OK, newbie still problems here!

    I have an iso on the data store and the parameters of the virtual machine pointing to iso with "connect to feeding on ' and 'connected' created, but it keeps trying to boot from the network and shows:

    Start-up of AMD Am79c970A NET

    Copyright info blah blah

    CLIENT MAC ADDR: vlah bla

    PXE - M0F: no boot file received

    PXE - M0F: Exit Intel PXE ROM

    Operating system not found

    I don't see anything I've missed, I searched this forum and tried Googling.

    Thank you

    Hedley

    Are you sure that the CD is a bootable image?

    Try with an ISO file.

    André

  • I want to use the recovery disc for re - install my pavilion dv6, but cannot boot from the recovery disc?

    Now my system Windows 7 Home premium canbe accessed, but with a lot of problems. That's why I want to reinstall it. I burned my own recovery (totally 4 disks) successfully disks. I insert the first disc of recovery CD-rom and restart my laptop, but it can not recognized but in win 7 automatically. could you tell me how to use my recovery disks to reinstall the system win 7 when that is not totally broken?

    Hello

    Probably go to BIOS and configuration of the machine to boot from the CD/DVD ROM. Please follow the instructions from HP:

    http://support.HP.com/us-en/document/c00364979

    Kind regards

  • How can I get thunderbird to delete messages from the server

    When Thunderbird gets mail from the server, I want that he deleted from the server. How can I do this?

    The Menu bar, select Settings Server Tools-account settings

    Check the boxes that work for you.

    No menu bar display? Press the ALT key.

  • Satellite A200 - cannot boot from the recovery disc - code 1

    I have Vista business and my laptop is running slow and is full of rubbish.
    I have in the past used my drive recovery to completely re - install vista and start from a fresh version.

    However, I tried this once and it says that it cannot boot from cd - code 1.

    Can someone tell me what it is and how to reinstall vista?

    Hmm. strange.
    Are you sure you have the right recovery disk?
    Are you abele to boot using another drive as MS Win XP CD or Linux CD bootable?

  • Portege A200 - cannot boot from the recovery disc

    Hi, I have a Portege A200 and an original unused Toshiba Recovery CD.

    When I go to recover, the DVD drive just turns and turns and nothing happens. I have tried different methods of booting with the disk to like, by pressing the C key, select boot from CD/DVD or just turn it on with the DVD in the drive. Same problem, the disc turns right away.

    I also checked the drivers TOshiba download page and let down when I found out that there are several drivers for the same thing, like the 3 drivers LAN! Which should I use? Also, I can confirm that the CD/DVD drive works fine because I already loaded windows XP, no problem.

    Any suggestion is appreciated.

    Kieran99.

    Hey Kieran99,

    I also think that s is not a problem of the CD/DVD drive. If it turns over and over again once he recognizes a disc but it can t be read correctly.

    Regarding your question about drivers I think that it of fairly easy. I can recommend the vendor and device ID in Device Manager. With these identification numbers, you can search on this website http://www.pcidatabase.com/ to determine the LAN controller. All that s! :)

    In addition, you can check the ID s in Device Manager, if you click the LAN card properties > Details > PCI\VEN_xxxx & DEV_xxxx

  • Iconia W3-810 cannot boot from the recovery disc

    Hi, I have a 32 GB Iconia W3-810.  The original recovery disk was lost.

    I made a Bootable DVD of 8.1 and also Win 8.1 bootable USB key.  These two have been tested on another laptop, and both can start this laptop to the installation environment.

    I also followed the guide to enter the BIOS of the Acer Tablet settings and change the boot order and change remove secure boot option.

    Unfortunately the unit keeps trying to start in Windows 8.1 - one who is full of viruses and should be flattened and start over.

    Help, please...

    Many of these cables power the Tablet via the splitter, but do not provide power at the side of the data cable from the side power (I don't think I explained that well). They are designed to power your device on the motor side while allowing access to data on the other side. If connected:

    Tablet- + - power
    |
    |
    DVD

    The Tablet receives power supply and Tablet provides the voltage and sends and receives data from DVD, but power does not give voltage on DVD. This means that the DVD does not necessarily receive the budget power that he needs.

    If you can, try the DVD connected to a powered hub. Turn upwards and actually to work are two different things, and tablets offer far less than the maximum power on their USB ports.

  • My product key is not accepted when booting from the recovery disc even if I use the product key supplied by the manufacturer.

    I wanted to clean up my computer so I copied the data on an external hard drive and then partitioned and formatted my hard drive is internal. I then ran the recovery CD provided when I bought the computer of Evesham Technology.  However, when I provide the product key which is glued on the case of my PC I get the message "the product Id you entered is not valid.  What should I do?

    Kind regards
    Eric

    How to activate Windows XP
    http://support.Microsoft.com/kb/307890/en-us

    See the section titled: "how to activate Windows XP by phone.
    Also, make sure that you do not confuse the letters and numbers (number 8 for the)
    Letter B, etc.).

    How to contact a Microsoft Product Activation Center:
    http://support.Microsoft.com/default.aspx/KB/950929/en=us

    Microsoft Activation centers worldwide telephone numbers:
    http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
    (This site is for activating Volume License, but if you call, they will help you)

    The phone number is not working:
    Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

    Users of Windows XP - Genuine Advantage Notifications:
    http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
    (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

    J W Stuart: Http://www.pagestart.com

  • How can I get my playlists of music from the list by song title?

    My iPhone 6s shows some of my playlists with songs listed by album.  How to change that to the list by song title?

    I do not know. On a phone, you do not use iTunes (this forum), only on a computer.

  • Qosmio G35: Cannot boot from the recovery disc

    I'm in trouble from the screen of my Qosmio G35 showing lines vertical, gel, then a loop on and outside.

    I used the Toshiba factory restore disc to reformat and the problem remains, I went further and chose the maquis of the HARD drive option. Bad choices made by this beginner, because now it does not recognize the drive at all, prompting me to "initialize".

    Lines remain, but it is not the material of the screen happens during some process that I follow, OK.

    A friend more computer over the phone prompted me to go into the BIOS, but we cannot access them. Research on the web, I tried the F12 suggested, but this does not work, just push me through in a screen offering 'Safe Mode' etc.

    Any help would be welcome. Thank you

    Hello

    Usually the vertical display lines looks like a hardware problem, in my view, it could be related to GPU failure.

    In any case, we should start first of all the problem of CD/DVD drive you must check if the disc is properly recognized in the BIOS.

    For this, it must Access the BIOS press the ESC (if Toshiba BIOS) or the key F2 (if Phoenix BIOS). Please check these two options because I m not 100% sure what the BIOS the Qosmio G35 uses.

    But like I said earlier the issue looks like a malfunction of the graphics card and you must contact the ASP in your country for assistance.

    Best regards & friend good luck

Maybe you are looking for