How can I know what ram slot ram in there on my G4 imac

Similar Questions

• Should I delete the programs of 2004? How can you know what is safe to delete?

  Original title: remove programs

  I think I have a virus.  I see on my computer a few applications with and installed as of 2004.  The computer was purchased in 2007.  When I run it in safe mode, it works fine and all applications have a date of 2007 or newer.  Should I delete the programs of 2004? How can you know what is safe to delete?

  Hello

  This is not an indication of malware. Could be those are placed on the
  computer by the manufacturer of the system and that was the date that firstly, they prepared their
  for massive installation, or if they did not set a date and be used arbitrarily.

  =============================================================

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• How can you know what drivers and programs are essential and those that can be deleted without harming my computer?

  Original title: completely clueless

  I'm totally clueless when it comes to computers, but I try very hard to learn. I am using the help section a LOT, but I can't seem to find an answer to the only thing that makes me crazy. How can you know what drivers and programs are essential and those that can be deleted without harming my computer? I have a very basic net accountant I learn on before I screw up a portable more expensive and I do a cleaning on my C and D drives to improve performance because it runs so slow but it tells me I have the drivers who slow down Windows. I would greatky appreciate any assistance from someone who has the patience of a saint and is willing to take the time to explain it to me, in terms laymans. Thanks in advance

  Drivers: you should know what you bought (in your machine) and what * you * want out of it.  If you want stability and things work properly - let alone the drivers.  If you want more performance check (and other games) in the drivers of motherboard chipset and video network from the manufacturers Web site... For more stability stick with the OEM website (HP, Dell, Lenovo - the assembler of the whole machine) and slightly more performance/push the limits (even if they want to work too - so still some stability) - access to websites of its components manufacturer.

  With regard to the programs: you can decide what you use and do not use.  If you are not sure, look it up (Google) or ask.

• Is it possible to change sequence settings after you start a project? Also, how can I know what sequence of parameters are best for clips that I have?

  Is it possible to change sequence settings after you start a project? Also, how can I know what sequence of parameters are best for clips that I have?
  The clips I have are HD and .mp3. MTS files.

  In the latest version of Premiere Pro, it is possible to change the settings for the sequence.

  You know what settings are best knowing what you are doing.  (Personally I'm fan of formal education for this.)  I know that sounds sarcastic, but, there is no right answer to the question whose parameters are the best.  There are many variables here, then... you really need to know what you're doing.

• How can I know what my redemption code is for photoshop elements?

  How can I know what my redemption code is for photoshop elements?

  Using redemption code

  http://helpx.Adobe.com/x-productkb/global/redemption-code-help.html

• How can I know what Adobe programs I need on my computer?

  My Adobe Flash Player keeps crashing. I just downloaded Flash Player Plugin from 14 and noticed that I have 5 other Adobe programs on my computer. How can I know which ones I need to keep? Those I have is:

           Acrobat.com installed 7/03/2010;
           Flash Player 13 Active X installed 5/14/2014;
           Flash Player 14 Plugin installed 7/09/2014;
           Reader X (10.1.10) installed 5/19/2014; and
           Shockwave Player 12.0 installed 9/16/2013.
  

  Given that you list the plugins installed below, any information about those do not necessary would be useful.

  You don't need everything! But if you don't there is the 'stuff' you won't be able to do on the internet or read when you download a file that needs an Adobe program or plugin.

  Flash Player 13 Active X installed 14/05/2014; = is for Internet Explorer

  Acrobat.com installed on 03/07/2010; and Reader X (10.1.10) installed on 19/05/2014; You can display the same type of files - PDF - except the old plugin for Acrobat don't is not "seen" by Firefox, maybe an IE-only to Acrobat version?

  Shockwave Player 12.0 installed 16/09/2013. = is not used too much more - I got rid of him (as) 5 or 7 years and don't even Miss

• How can I know what power adapter is mine since we both have the same for macbook pro 2013?

  I mixed my adapter upward with my friend and we both have the same adapter for macbook pro and mine is almost more recent than its adapter. I need to know how can I know who is mine?

  I doubt that you can unless it adapt serial numbers or other identification on the cards.

• How can I know what that found Windows memory diagnostic?

  There is a small box that says.

  "your computer has a memory problem" "memory problems can cause the computer lose information or stop working." To identify and fix the problem contact the manufacturer of the computer "."

  Y at - it somewhere I can look and see what she got?

  I had all kinds of problems such as, blue screen memory dump, google chrome aw snap crash a lot, I was playing a game and it crashed to the desktop, so I couldn't run all the programs with reformulating them the computer, the computer no longer meets the Middle Windows up to date.

  When these problems started I thought ok I have this Windows 7-64 bit running for 3 years so I have re installed every thing and the same thing happened, I did it again but this time I used my XP disk to do the long format, it took 6 hours to do the 2 to hard drive if there are viruses that should have killed them and the reader should be as close to new as I can get it, but I still have the same problems.

  I ran scan disk, no problem, right now my CPU usage is 6%, RAM is 1.78 GB used out of 8 GB on the Task Manager.

  My computer performance scores are

  Processor 7.2

  7.4 RAM memory

  Chart 7.4

  7.4 games graphics

  Hard disk 5.9

  It says I have a memory problem, but I've never seen more than about 2.8 GB of RAM being used I think that my motherboard is wrong something to do with the LAN of the jury party because all the problems seem to have something to do with the internet, but I would like to know what she has in case it's the hard drive and not the Mo before as I have spend a lot of money on the bad parts.

  I have try ed out the RAM and put back in, run the test, but did not so bad yet lucky, so I took the RAM on another PC and TA-DA! She has passed the test and everything works now no more of accidents.

  It would have been nice if she was 'Diagnostic memory Windows (RAM)' instead of memory diagnostic Windows user so first like me knows just what memory it is testing, I found by chance and didn't know what it was.

  So if your browser blocks a lot especially google chrome "AW snap" crash and accident of programs on desktop to run this tool, it could be your RAM.

  I hope this may help others.

• How can I know what NVidia drivers are in el Capitan?

  I'm trying to find the best combination of price and capacity for a video/graphics card to go in a Mac Pro 5.1 running el Capitan. NVidia seems to be the best choice for my type of work, but how do I know if the drivers from NVidia are integrated to the el Cap? I know that there is a possibility of losing the bootscreen, but what video advice may work in a Mac Pro on el Capitan?

  You can download Nvidia drivers:

  http://www.InsanelyMac.com/forum/topic/306535-NVIDIA-Web-driver-updates-for-El-c apitan-implementation to date - 01202016.

  Presence or absence of a splash screen depends on the firmware on the map because during startup, no drivers are loaded. The start screen depends on the firmware on the card. A card flashed to a Mac has a bootscreen

• How can you know what remains during a restore?

  I just got a new iphone more than 6 s and its been 2 days and is always restore things. is it possible to know what remains to restore or if its stuck? I was going to upgrade the software on it but can not until its finished. TIA

  Hello SCB1021,

  Congratulations on your new iPhone 6 s more! I know how you want to finish the installation process and start to use your new iPhone. Let us ensure that we discussed a few steps that can help your situation.

  Restore my device from a backup to iCloud takes a long time

  Restoring a backup can take time because of the size of the backup or the speed of Wi - Fi network. For example, iCloud may take about 1 to 4 hours per gigabyte during a restore process.

  There are several steps that follow:

  • In iOS 8 or later, check the status of the transfer on your device under settings > iCloud > Backup. If the restore process is in progress, the backup setting is gray.
  • Make sure that your device is connected to the Internet with reliable WiFi.
  • Make sure that your device is plugged into a power outlet.
  • Check the Apple progress bar that is displayed during the transfer of a backup.

  If you need help, restore your device from a backup to iCloud

  Thank you for using communities Support from Apple.

• How can I know what I currently have in my system, disk storage, memory, etc.

  How can I find out what my current computer has the extent of the CPU, sound card, memory, cd/dvd?

  Hello

  Check with support of the manufacturer of the system (manufacturer of motherboard for customs systems), their online
  documentation and ask in their forums. If it's a great brand, you can also BING or Google do
  and the model.

  Start - type into the search box-> system CONTROL the above information and click twice.

  Other methods:

  -Free - Speccy is an advanced for your PC system information tool. Need to know what is inside of your
  computer? No problem! Speccy will give you all the information you need.
  http://www.Piriform.com/Speccy

  Speccy - Forum - help here if necessary
  http://Forum.Piriform.com/

  Belarc Advisor - free - creates a detailed profile of your installed software and hardware, network inventory,
  fixes missing Microsoft, the State of the anti-virus, benchmark security and displays the results in your Web site
  Browser. All of your PC profile information is kept private on your PC and is not sent to any web server.
  http://www.Belarc.com/free_download.html

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Space on the disk C: How can I know what programs/Files can be deleted in compensation?

  How can I find out what programs/Files can be deleted? I made the cookies, temporary internet files, but I get a message that my space is down to less than 200 MB (?). I think that the mb is correct... I don't know the 200.

  Version of Windows?

  Download and run Ccleaner to clean up the temporary and other files. Caveat to uncheck the toolbar installation if you do not want.

  http://www.Piriform.com/CCleaner

• My compurter is offline for about 1 and 1/2 years. I have not all release dates since then until now. How can I know what I need and how to get them? Thank you

  How can I sussesfuly fix me my computer

  Hello brice,.

  To see what updates are available for your computer, you will need to connect your computer to the Internet and look for the updates.
  See using Windows Update in Windows Vista
  See the updates Windows Installer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I know what is my alias hotmail

  I have installed several pseudonyms and deleted some and now I don't know which ones I've done.

  How do you determine what is your alias hotmail or who is good. ?

  Hello

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can you know what charger completed?

  I am loading a bunch of SWF files in my movie, and when they finished loading I need to change each color of sovereign wealth funds based on my xml data. My problem is when my Event.COMPLETE off I do not know what charger, it belongs to retrieve the correct XML. I tried to give the names of my Chargers but I can't access the Event.Complete function name. My trace causes the error: the property name not found on flash.display.LoaderInfo and there is no default value. How to access my charger name?

  for (var w3:int = 0; w3 < cartXML...) Item.length (); W3 ++) {}
  
  var thumbLoader:Loader = new Loader();
  thumbLoader.name = String (w3);
  thumbLoader.contentLoaderInfo.addEventListener (Event.COMPLETE,
  {function(e:Event):void}
  thumbCount ++;
  trace (e.Target.Name);
  If {("setSkinColor" in e.currentTarget.content)
  Object (e.currentTarget.content) .setSkinColor (bought. @bodyColor, 255);
  }
  else {}
  e.currentTarget.content.setData (255,255).
  }
  thumbArray.push (e.currentTarget);
  If (thumbCount is cartXML... {Item.length ()}
  fillDataProvider();
  }
  });
  var thumbURL:URLRequest = new URLRequest (this. Path access + cartXML... Item [W3] .source);
  thumbLoader.load (thumbURL);
  }

  The target of the event is the contentLoaderInfo.  So if you want to find the name of the shipper, you should be able to use: e.target.loader.name