How can I make a DVD of the restore hidden in my external hard drive partition recovery
How can I make a DVD of the restore hidden in my external hard drive partition recovery because I want to recover my toshiba satellite L840 that does not respond directly to my hard drive so I put my laptop to an external HARD drive and then I want to copy a DVD recovery partition
Your question is a bit confusing, you can boot the laptop at all? Have you tried booting in safe mode, you can make a recovery DVD set from there, the folder Toshiba.
With the drive in the Toshiba, you should be able to use a F, F10, F11, or F12 key to activate the installation from the partition hidden started upward.
Otherwise, you can contact Toshiba, and with the model of the product id number and the laptop for Windows, you can buy a set of disks.
I am aware that this issue (or different versions of it) will be requested a thousand times before, but after searching on the internet for a solution, I have been unable to find all the information that brings a simple clear answer that is specific to my problem and so thought I would ask the question myself.
I recently bought a Toshiba 1 TB external hard drive to transfer music, photo files and internal document in front of the memory of my old PC running Windows, as well as files, music and photos from my existing MacBook Pro, so I can "release" the memory on the latter.
Transfer files from the old PC proved to be easy; success achieved by simple drag / drop the files to the appropriate location on the external HD icon of Toshiba which appears once I connected to a USB port. It is perhaps worth mentioning that the area of States hard drive has been formatted NTFS for Windows, and so I guess that I would not have expected any problems when transferred to a PC.
Move the files from my MacBook has however proved anything but simple and trying to drag the respective music and photo files and drop them on the HD Toshiba icon (which appears on my desktop once it is plugged), I seem to be affected by the same issues as so much seems to have it before me, in that "forbidden access" / error symbol appears with the cursor , and bounce the files to their original location whenever I try to place them on the Toshiba HD.
I understand that this is due to the HD is formatted in NTFS, and that I would need to reformat the hard drive to move files from my MacBook, which brings me to my questions:-
(a) how do I do this, and
(b) can I do this without losing, damage or remove the NTFS files from my old PC, which are already stored on the external hard drive.
If one is able to offer any assistance, in the most simple, easy to follow the description, I would be really grateful!
Never been so thanks in advance!
1 install software such as Paragon NTFS on the Mac and let the reader in its current form or from the Finder, choose utilities go to menu, open disk utility and reformat.
2. that by putting a copy on another drive. You should do this anyway, in case of failure of this drive.
I have a HP slate 7 more I bought a USB female and used as a connector between the Tablet and a Seagate 500 GB external hard drive, I. Hard disk light does not illuminate and the Tablet is not picking it up. I saw all the videos of YouTube on android tablets works with external hard drives. Why it does not work on mine?
Have you looked at the sticky GTA on the homepage of this section?
Since the tests carried out by Experts of the two HP on the list I posted, I see that your slate is listed as not having does not support USB external drive when you use a cable OTG (on the go).
I try to print the names of files on drive "C".
Use this excellent free program.
Karen - free directory printer - print the name of every file on a disk, as well as the size of the file, date and time
last modified and attributes (read-only, hidden, system and Archive)! And now, the list of files can be
Sort by name, size, date created, date last modified, or last access date.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
My old Vista laptop is dead and the tech put the HDD in an external enclosure. I can access all the files, but I have search? I want to get everything I can.
I'll call this resolved. I have my emails and address books back, by copying the files to the new profile. I don't know why the import of complete profile folder does not work, but I am satisfied with what I got.
Use LR5. Because of volume and the size of the photos, I use an external hard drive. When opening LR5 it references only the local hard disk. How can I change the refernce to read the external drive. Thank you
Use LR5, due to volume and the size of the photos, I use an external hard drive. LR refers only the Local Drive C not outside. Where do I change this by LR read the external drive. Grateful for the help.
LR is not a file Explorer. He knows only the disks that you imported photos of.
If you have previously imported these photos, then later moved into the external hard drive, go to the library files and "update location" Panel on the files that you moved.
If you have never imported these images on the external hard drive, perform an import by using the option 'Add' (not ' copy') to keep the images on the external hard drive during import.
I can't initialize the disk for my new external hard drive because the drop-down list in the Disk Management Console does not give me this option. I'm logged in as an administrator and running Windows XP. The driver for the new hardware is not digitally signed because I can't initialize the disk. So I can't get my new hardware to run. Does anyone have any ideas on how I can get the option "Initialize disk" in the Disk Management Console?
Can you simply right-click and format everything first? The drive must be formatted before use, make sure that you format NTFS.
See you soon
How can I remove old updates from windows to prevent their fill my hard drive?
You don't want to. Otherwise, why would have installed their in the first place? They are updated for security. Thema alone.
How can I keep genuine win 7 in my laptop lenovo after formatting hard drive?
Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
Can I use the disk utility on an external hard drive Mac os 10.6.8 to repair the drive on my macbook pro running mac os 10.7.5? My Macbook Pro does not start after that I upgraded to mac os 10.6.8 Lion and I have a bootable backup just before the upgrade.
Original title: USB problem
I use windows 7 as operating system. I have problem when I insert USB devices as pan tie drive, mobile, reader of cards ect. USB port of my PC. The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive. so please suggest me what I can do?
Start Windows Explorer, and then see if there is a drive letter assigned for access to the
drive. If this is not the case, check if the disc is shown in disk management.
- Open Computer Management by clicking on the button start , by clicking on Control Panel, system and security, clicking Administrative Tools and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
In the left pane, under storage, click Disk Management.
If there has made a right click option - assign a drive letter for you can use Windows
Explorer to copy files.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">->
I can't delete some folders on my destop (copied from an external hard drive before).is what I do to delete the folder: right-click on the folder, confirm with Yes. then the message: this item is not found. It is no longer on C/user/peter/destop.Try again and again and again...
Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
Diagnose and repair Windows files and folders problems automatically
Difficulty of broken desktop shortcuts and common system maintenance tasks
Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.
Method 2: You can follow the steps mentioned in the link below
I get the 0x8078012D error code when I run the Windows backup on an external hard drive. I have Windows 7 Professional. That suggests this error code is the problem and how can I solve the problem?
For people who read this thread, I offer the following information. I solved the problem by noticing that the problem could have been caused, when the system image is created. So I did a backup without creating the system image and backup is complete without error.
Then I used the backup program to create a system image. This time error (0x8007045D) was displayed. The error report says "the operation failed for a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then try again using. »
So I ran chkdsk/r, and this program is a bad sector on the hard drive of my computer and fixed the error. It took about an hour to run the program. Now, the image of the system and the backup of data file work again.
So I think that the main cause of error (0x8078012D) is deborahgarbe of i/o error (0x8007045D). So if you get the first error code you can search for fixes for the second error code fix the root cause.
Had a project done with first elements 11. All media files and PRE files were in the same folder on an external hard drive. Received a new computer, loaded first items 11 (which of course doesn't recognize not all previous projects as it is)
Had a project done using first items 11 (the file exported and posted on youtube). All the media files and PRE files associated with this project were located in the same folder on an external hard drive. Got a new computer, responsible for first 11 elements (which of course doesn't recognize not all previous projects because it is a new installation) and now cannot open the original project to make some adjustments (connected to the external hard drive of course)... Even tried to open the last saved auto program as well, no luck. Just get a shell of the original project, but no real media file is passed in. Then get a prompt asking you where the file "rendering-3090026..." (20 More digits) is located. Looking for C drive and external hard drive without success. Help!
Which operating systems are involved - old and new?
The external drive has the same drive letter on the new computer as it did when it was used on the other computer?
Where are the video preview and the old led, Audio preview files compared to new? See Edit Menu/preferences/Scratch discs?
Are all the place where is the file... messages just to render files? If all are for rendering files, what happens if you click ignore for their
messages? Can you enter into the project and render it again if necessary and proceed with the project?
Please see the bulletin. With the above information, we will decide which way to go? It seems that a media disconnect situation has developed in
the passage from one computer to the other.
I moved my site from the old host of godaddy. updated the dns at register.com. On my phone android with firefox, I can see the new site, after I dropped the wifi and went to the data. On my desk and my husband two computers, we can only see the old site, even after clearing cache. How can I make Firefox displays the new site?
You can reload webpages and ignore the cache to refresh potentially stale or corrupt.
- Hold down the SHIFT key and click the Reload button
- Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
- Press 'Command + shift + R' (Mac)
You can delete all data stored in Firefox with a specific area through "Forget this Site" in the context menu of a history entry ("" history > view history "or" view > sidebar > History "") or via the subject: permissions page.
Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from that domain you don't want to lose then check that back up these data or make a comment.
You can't recover from this "forget" unless you have a backup of the files involved.
It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.
Maybe you are looking for
Hello Mr medam I forgot my restriction code how do I reset this code
Hello I generated a .tdms file and when I tried to open it in DIAdem I get the following error. I tried using the repair of PDM tool, but I can't open the file I use DIAdem 2012. I tried downloaded a copy of the data in the file however it may be too
Comment to Moderator: Rearranged a little thread to allow the solution to marking and giving the OP credit for it. Kind regards.
My laptop can open internet explore properly, the cursor may work when you tap the address space to type a Web site, but the site it does not point to the search space to find anything except the right button
My laptop can open internet explore properly, the cursor may work when you tap the address space to type a Web site, but the site it does not point to the search space to find anything except the right button. What is the problem? Harry
I am trying to install a wintv950q. on my computer, I get massege on framework arror net incompatble with the privious version. I have IE8. onmy computer? How can I fix that?
I am trying to install a wintv950q tv. tuner. on my computer, I get massege on framework arror net incompatble with the privious version. I have IE8. onmy computer? How can I fix that?