How can I make a network between two databases?

Similar Questions

• How can I activate the network between my guests on merger 4.1?

  Hello

  I just started with VMware Fusion 4.1 and I want to create a local network for testing. On VMware workstation, it is pretty easy to do, but on the merger, it will not allow the traffic between my guests.

  I have 2 linux guests running, both with ssh service active and upward. I can ping each of them and also the Lion OS guests but I can't ssh to one guest to another, he said that there is no route to the host. I can ssh to OS Lion for guests.

  Do anyone knows how I can activate more ICMP traffic between guests?

  Thanks in advance,

  Will be

  Well first of all let me say that I have no problem making a ssh session between host comments, comments to the host and or guest invited on Mac OS X Lion and VMware Fusion 4.1.1.  So I would say that you do not have something properly configured and if you use Fedora, the first thing I do is the firewall and disable SELinux, at least for the connectivity test, then go from there.

• My windows XP on my computer has 2 equipped with hard disks for it, but only the master hard drive showed. How can I make if I use two hard drives.

  The master drive is showing that the C: drive but my other hard drive does not appear. How can I solve this problem...

  Sorry if I can't give full detailed descriptions Im new to XP.

  When the computer starts, press the right key combination.  Check the manual of your computer, or see the article by Michael Stevens' Access/Enter motherboard BIOS .

• How can I compare the differences between two files After Effects?

  I have a major problem.  I was working on special effects for a film.  In After Effects, when I change siggificant, I often have to register under and create a new name so I can go back to the old work if necessary.  It comes in a case, I have come back from earlier works.  If I use these two files After Effects allows you to create multiple clips of effects.  And I do not remember just where you look at it, it is better.  Does anyone know a good way to compare the differences between the files?

  One thing to keep this conversation on the right way: I know that I did a stupid thing.  I've never done this before so can we please not spend a lot of time on how to avoid this problem and stick to how we solve this problem?

  If you encounter difficulties to identify differences in the old and new versions, you can use this procedure:

  To avoid confusion, I'll call your former company and your most recent compositions CompB comps.

  CompA drag "New Comp" icon in the project window.  This will create a new temporary layout that contains the nested CompA.

  Drag in your new COMP CompB temporary ensure it aligns image for image with CompA.

  Place the top layer (CompB) difference.

  Now, when you play through the comp, you'll see differences in color at a time where the comparison and CompB are not identical.

• How can I get a space between two boxes please

  www.hunterstables.co.UK/Sales1.html

  < div class "saleImage" >

  Thank you in advance

  .SaleImage gives a margin of down in your css - 20 pixels for example:

  margin-bottom: 20px;

• How can I make java objects in a schema

  Hello.. good afternoon everyone...
  
  How can I make java objects from a database schema?
  
  Assume that the credentials are scott/tiger@db1
  
  One other thing is that... I do cmd (command prompt) because there is no developer plsql or sqldeveloper installed in the machine.
  
  PLSS help... Thanks in advance...

  Hello
  That's ok. This run just to try

  DROP JAVA SOURCE "javaclass1";

  Kind regards
  Simma...

• I have an iMac (2015).  When I open Garageband, there are only two buttons on the control bar, play and stop.  No record button, rewind or ff.  Where are they and how can I make it appear?

  I have an iMac (2015). When I open Garageband, there are only two buttons on the control bar, play and stop. No record button, rewind or ff. Where are they and how can I make it appear?

  Try to enlarge the GarageBand window by dragging the corners of resizing.

  If she looks like this, your window is small:

  

  You can also try to click the double arrow at the end of the toolbar to reveal more options.

• WiFi network tells me it is not secure and it is on the public network. How can I make private?

  Original title: privacy

  My wifi network tells me it is not secure and it is on the public network. How can I make private?

  You must go into the router settings to change that.  What brand/model is your router?  If it is integrated into your modem?

  You must set a network password that prevents people without using your wireless network.

• Homegroup that my pc can't find the other pc, it seems that the Peer Networking Identity Manager service is not running. How can I make it work

  I lost contact with other computers in collective housing. It would seem that the Peer Networking Identity Manager service (p2pimsvc) does not work. How can I make it work?

  Hi Ken Jones571,

  ·         Did you do changes on the computer before the show?

  I suggest you to set the service to automatic and check if this is useful.

  a. click the Start button and type Services in the Start Search box and press enter.

  b. find the Peer Name Resolution Protocol (PNRPsvc) services or services Peer Networking Identity Manager (p2pimsvc), set it to Automatic to clicking on the service and selecting Properties and change the Startup type to Automatic.

  Method 1: I suggest you try a clean boot and check if the problem persists in the boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 of the article mentioned above.

  Method 2: It could be that the NVRP svc and p2pimsvc is corrupted, remove entry can help you solve your query. Check the following location and delete the file idstore.sst

   

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OSH

  Let us know if that helps.

• How can I make this update, when I have two records (a primary key, no seq)

  How can I make this update in pl\sql
  Below is the table with data
  

  CREATE TABLE INSERT_TE
  ( 
  PIDM        VARCHAR2(8), 
  FORM_ID     VARCHAR2(2),
  TEACHER     VARCHAR2(30)
  )

  INSERT into INSERT_TE
  (
  PIDM,
  FORM_ID,
  TEACHER 
  )
  SELECT 
  '1106651', 
  'TE',
  'Teacher, Alber Howard' 
  from dual

  commit;

  INSERT into INSERT_TE
  (
  PIDM,
  FORM_ID,
  TEACHER 
  )
  SELECT 
  '1106651', 
  'TE',
  'Teacher, Alber2 ' 
  from dual

  commit;

  INSERT into INSERT_TE
  (
  PIDM,
  FORM_ID,
  TEACHER 
  )
  SELECT 
  '2321241', 
  'TE',
  'Teacher, Silly Billy ' 
  from dual

  Commit
  
  You're going to end with something like this: in a cursor...

  PIDM     FORM_ID     TEACHER
  1106651     TE     Teacher, Alber Howard
  1106651     TE     Teacher, Alber2 
  2321241     TE     Teacher, Silly Billy

  so I need to update a table
  
  If there is only one file like this 2321241 teacher YOU, Billy Silly
  no problem I'm

  UPDATE   saturn.sarchkl
           SET
           sarchkl_receive_date = SYSDATE,
           sarchkl_activity_date = SYSDATE,
           sarchkl_source = 'U',
           sarchkl_source_date = SYSDATE
           WHERE
            sarchkl_pidm = v_pidm3
            AND sarchkl_receive_date IS NULL
            AND sarchkl_term_code_entry = p_term
            AND sarchkl_admr_code = 'REC1'

  But if there's a PIDM (pk) with two records

  PIDM FORM_ID TEACHER
  1106651 TE Teacher, Alber Howard
  1106651 TE Teacher, Alber2 

  I need to make 2 updates (notice the rec1 sarchkl_admr_code AND for the firs and rec2 during the second
  The first record should update the table when the condition is sarchkl_admr_code = "REC1" and the second disc with the
  condition is sarchkl_admr_code = "REC2.
  

  UPDATE   saturn.sarchkl
           SET
           sarchkl_receive_date = SYSDATE,
           sarchkl_activity_date = SYSDATE,
           sarchkl_source = 'U',
           sarchkl_source_date = SYSDATE
           WHERE
            sarchkl_pidm = v_pidm3
            AND sarchkl_receive_date IS NULL
            AND sarchkl_term_code_entry = p_term
            AND sarchkl_admr_code = 'REC1'

  and

  UPDATE   saturn.sarchkl
           SET
           sarchkl_receive_date = SYSDATE,
           sarchkl_activity_date = SYSDATE,
           sarchkl_source = 'U',
           sarchkl_source_date = SYSDATE
           WHERE
            sarchkl_pidm = v_pidm3
            AND sarchkl_receive_date IS NULL
            AND sarchkl_term_code_entry = p_term
            AND sarchkl_admr_code = 'REC2'

  I do this in pl\sql, I don't have a sequence in the INSERT_TE table, how do I know that the first record in

  1106651 TE Teacher, Alber Howard
  1106651 TE Teacher, Alber2 

  updated a rec1 and the second updates when sarchkl_admr_code = "REC2."
  
  I guess I can create a sequence, but I'm inserting a table of a select statement, I get the error message
  ORA-02287: sequence number not allowed here, when I try to do the following:

   
   INSERT INTO SYTEACH
  ( 
  SYTEACH_PIDM,
  SYTEACH_ID,
  SYTEACH_TEACHER,
  SYTEACH_SEQ
  )
  SELECT   
        DISTINCT
        spriden_pidm, 
        sarchkl_admr_code, 
        szsform_form_id, 
        szsform_schl_off_type||', '||szsform_schl_off_firstname||' '||szsform_schl_off_lasttname teacher,
         SZSFORM_SEQ.NEXTVAL
          FROM   saturn_midd.szsform, saturn.spriden, saturn.sarchkl
         WHERE       spriden_ntyp_code = 'CAPP'
                 AND szsform_common_app_id = spriden_id
                 AND spriden_pidm = sarchkl_pidm
                 AND sarchkl_admr_code = 'REC1'
                 AND szsform_form_id = 'TE' 
   

  What is the simple way to make this update...

  Hello

  you said:

  >
  But if there's a PIDM (pk) with two records

  PIDM $FORM_ID TEACHER
  TE 1106651 teacher, Alber Howard
  1106651 TE, Alber2 Professor
  >

  Loc PKS are unique! (otherwise we don't call them pk)

  For your table, you can set a single like this:
  PIDM column + a sequence. (new heading):

  ALTER TABLE INSERT_TE ADD(TEACH_SEQ NUMBER)
  /
  
  UPDATE INSERT_TE x
     SET TEACH_SEQ =
            (SELECT n
             FROM   (SELECT ROWID rid,
                            ROW_NUMBER() OVER(PARTITION BY pidm ORDER BY TEACHER) n
                     FROM   INSERT_TE t) s
             WHERE  s.rid = x.ROWID)
  
  PIDM     FORM_ID     TEACHER     TEACH_SEQ
  1106651     TE     Teacher, Alber Howard      1
  1106651     TE     Teacher, Alber2       2
  2321241     TE     Teacher, Silly Billy      1
  

  I need to make 2 updates (notice the rec1 sarchkl_admr_code AND for the firs and rec2 during the second
  The first record should update the table when the condition is sarchkl_admr_code = "REC1" and the second record with the condition is sarchkl_admr_code = "REC2.
  >

  not normally.

  but you can do (now)

  select PIDM, FORM_ID, TEACHER, 'REC'||TEACH_SEQ TEACH_SEQ from INSERT_TE
  
  PIDM     FORM_ID     TEACHER     TEACH_SEQ
  1106651     TE     Teacher, Alber Howard     REC1
  1106651     TE     Teacher, Alber2      REC2
  2321241     TE     Teacher, Silly Billy      REC1
  

  and use the last column to update you...

  Published by: user11268895 on August 20, 2010 14:01

• Build a private network between two physical hosts in ESXi 4.0 for VM guests

  Hi all

  I am a newbie in the use of VMWare ESXi for my company testings and I have a question on networks

  in ESXi. In fact, I always do my tests in my VMware Workstation, and it's pretty easy to build a virtual

  private network between two guests of computer virtual and it needed to do more real testings on ESXi environment.

  But now I have two Dell servers mounted and with two ESXi 4.1 installed on these servers.

  Each server has two network cards connected to the same network switch.

  In this essay, I have to install a RAC Oracle 11 g as guests of virtual computer on two separate server Dell for

  two RAC nodes.

  The installation Guide for the PAP, I need to build a network between two nodes.

  My superficial knowledge network, the private network address is not the same as

  the public network address, in this case, the IP address provided by the network switch is

  10.1.10.X and it should be public network address.

  In this case, how can I do the private network of ESXi settings?

  I do the settings of the network switch? I'm not the guy of networking and really

  want your expertise in this area.

  If you have an idea or experience to share, please kindly help.

  Thank you very much

  Ray

  SonyRaymond wrote:

  Then private network can be established between NIC (N1) and NIC (N2) with address 192.168.1.X

  range?

  Yes, that's correct. It would have made you have a private network layer 3 between the two guests in the 192.168.1.x address range.

  In general, you also want to isolate a layer 2 (ethernet) with the VLANS on the physical switch, but if this is not possible at this time then it could be implemented now and you could later add VLAN in the switch.

  It is also the reason why I think you should create a new portgroup on the same vSwitch as other existing exchanges. If you later configure VLAN to the physical switch, it will be very easy to activate this on the "private" portgroup

• How can I make Apple sent an official request for Andorra in the list of international codes?

  Apple acknowledges that Andorra Telecom (Mobiland) is an approved operator.

  However it does not include the international dialing code of Andorra (+ 376) in the list of phone prefixes in the country.

  This prevents verification services, such as in two steps and two-factor authentication.

  How can I make Apple sent an official request for Andorra in the list of international codes?

  Thank you.

  Return of goods - Apple

• How can I make the work/look like a Thunderbird 2 Thunderbird?

  I used Netscape/Mozilla/Thunderbird Mail since the middle / end of the 1990s and was disappointed by the changes after Thunderbird 2, so I went years of Claws Mail, but it is not enough for everything. How can I make Thunderbird current work/look like version 2? In other words, I would turn off the tabs for messages & research, including all traces of what it looks like a label, or space curved GUI / additional shadow separated, so also have only a single search box that will search and display in the current folder box and keep the menus easy to use (with shortcuts that appear when you type) standard for GUI programs While getting rid of the imitation chrome button. I guess that the tabs are okay for things like dealing with Add-ons, but that's all. Maybe there are other things I can think. I know that most/all this can be done in terms of configuration and I think a lot of people would like that there is a full article on it. Virtually everyone, many people that I talk about e-mail also let Thunderbird for all these reasons, of it being too influenced by web browsers, and the IRC channel is virtually dead, so I came here, hoping that this place is not as dead with what happened with the project (announcing that no major update will be When most of the people preferred it maybe before the latest GUI major updates)

  Seriously. You're in the minority, I think.

  No one took the trouble with this stuff since V3 came out. but I wrote a blog postabout this 5 years ago and Mozillazine did a knowledge article database that went further than my blog post. But I wanted to just my menu bar headings message and back small Mozillazine entered CSS change and I think some that can be made obsolete by Australis was two years ago. But if you want to go.

• Firefox keeps displaying old site, ff mobile detects the new site. How can I make Office go to the new site?

  I moved my site from the old host of godaddy. updated the dns at register.com. On my phone android with firefox, I can see the new site, after I dropped the wifi and went to the data. On my desk and my husband two computers, we can only see the old site, even after clearing cache. How can I make Firefox displays the new site?

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  You can delete all data stored in Firefox with a specific area through "Forget this Site" in the context menu of a history entry ("" history > view history "or" view > sidebar > History "") or via the subject: permissions page.

  Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from that domain you don't want to lose then check that back up these data or make a comment.

  You can't recover from this "forget" unless you have a backup of the files involved.

  It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

• How can I make Thunderbird start car with windows startup

  How can I make Thunderbird start car with windows startup

  You can by placing a shortcut in the startup folder of windows, just like any other windows program.

  However if you do, you are likely to encounter problems such as downloading email while still load the antivirus and the network is busy, announcing the arrival of machines on the network (which can be a network a) and any other program of a dozen are loading is heavy risk of timeouts and disconnections of the server as well as error messages that make little sense because they are something that still load.

  The bottom line is so safe that you can, but if there are any questions bring her out of there first.