How can I make folders containing media files in Vista act as normal when files displayed in Windows Explorer.

Vista handles the media completely differently, and I hate it.  I want to deal with media files as normal files, so I can see, size, date, etc. All previous versions were very good.

Here's how to change the default template for a folder: http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets the folder type template according to what are the types of files in the window and the settings display window Explorer. This will show how to reset the display settings for the Windows File Explorer, disable Automatic folder Type Discovery (which is I think what you want)and increase the folder display the cache to make Vista do not forget the display settings, the folder type template, the size or the position of a specific window for when it was still closed to the location of specific path.

It does not work with the Sub record under, Open with, open in a new tab (Internet Explorer), etc... dialog windows of type through the good File menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program AutoSizer to resize them.

Here is another article on how to modify the columns in Windows Explorer and sort in Vista: http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided: http://news.cnet.com/8301-13880_3-10019957-68.html.)

I hope this helps in your situation.

Good luck!

Lorien - a - MCSE/MCSA/network + / A +.

Tags: Windows

Similar Questions

  • How CAN I Make, hearing, CC, Edit, file, audio, (.) DTS)

    How CAN I Make, hearing, CC, Edit, file, audio, (.) DTS)

    Help, please. Thank you

    However, if it's any help you, hearing can open, save, and, consequently, change the .ac3 Dolby Digital format files.

    Otherwise, as Steve says:

    DTS store | DTS

    Over-codes DTS - HD - Minnetonka Audio Web Shop

  • How can I make the smaller pdf file size?

    How can I make the smaller pdf file size?

    Hi vickyb,.

    Reducing the size of PDF file requires Acrobat (one way is by choosing File > save as > PDF of reduced size). If you do not have Acrobat, you can try it free for 30 days. See www.adobe.com/products/acrobat.html for more information.

    Best,

    Sara

  • How can I make my Clock.swf file disappear?

    Hello

    How can I make my Clock.swf file disappear? The following code works fine for clips video, but throw an error when using the .swf files.

    Introduction_mc. Visible = false; > > > This code works very well

    Clock.swf.visible = false; > > > > Copy the following code generates an error (how to solve this problem?)

    Help, please.

    The simplest is to target the Loader object.

    l.Visible = false;

    or

    removeChild (l);

    the two will work.  And you can make it visible again if need to use the opposite of these commands.

  • How can I make sure my internet cable works even if the icon is not displayed by the clock

    I see the wireless connection icon, but I used to see one for the wired connection also. So where is it?

    How can I make sure my internet cable works even if the icon is not displayed by the clock?

    Click Start > Control Panel > network and Internet > network connections.

    Click with the right button on your Local network, and select Properties. In the window properties of LAN make you that these boxes are checked.

    [] Display the icon in the Notification area when connected

    [] Notify me when this connection is limited or no connectivity.

    Click [OK] and get out of here!

    Right-click on start and select Properties. On the taskbar and Start Menu click the taskbar tab, and then click the Customize in front of the Hide icon button inactive and it make sure that the option 'always show' for the local network is selected.

    HTH,

    NASS - http://www.nasstec.co.uk

  • Cannot read media files by clicking on 'Play All' option in the management of the music in any folder that contains media files, even if Windows Media Player is set as default player.

    When I need to play all media files in any folder by clicking on the play all option in the management of the music I do not get windows media player running or set of files I just need to play only one unique file double clicking or by creating a playlist. Very annoying sound play a single every time file. Help, please! Thks

    Can you try to select all files (Ctrl + A) > with the button right, select 'Open with' > select Windows Media Player

    This step will open all the music?
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I make all the emails on a .bcc of distribution list when you use the address book?

    When I send an email to a "list" in my address book I want to warn all the email addresses of the recipients to be visible by all byhaving be the entire list > bcc - how can I do this with Thunderbird?

    Place the list in an address field, click the TO and replace it with BCC.

    If you do not Contact sidebar enabled in the entry window press F9 to turn it on. Select contacts or to the mail list, then use the button Add to the BCC.

  • How can I make Outlook Express my default e-mail server by chance I went it to Windows Live

    I received an email from a friend this morning and when I went to open his attachment he came on Windows Live.  When I opened it, I was asked if I wanted to do Windows Live my default server by accident, I hit Yes but I want to use Outlook Express as my default server.  How can I change to Outlook Express?

    Control Panel | Add/Remove programs. Set Program Access and Defaults. Custom + down arrow | Select the option for Outlook Express.
     
    Making OE the default e-mail client:
    http://www.oehelp.com/oedef.aspx
     
  • I installed Windows 7 64 bit and then some programs will not install the 64 - bit while telling me that I have a 32 bit OS. How can I make sure I have load a 64-bit version only when there is a choice?

    I have create a new PC and installed Windows & Pro 64-bit. While some offer programs install both 32-bit and 64-bit as a single installation and the installation of the program checks it should install. A few programs installed 32-bit when I said to use the 64-bit. I received a message that I had a 32 bit OS and that it could not install the 64-bit version. How can I ensure that the 64-bit version is always installed when it is available. I have a program that I need it's 32-bit however.

    I also installed Office 2010 and want to know how to check if it installed 32-bit or 64-bit.
    All this is because I'm about to build a new PC for my wife and want to avoid these problems right at the front with it.
    Thank you
    Doug

    If you buy a commercial version of win7 you are provided with the installation dvd of bit versions and a unique activation key. You cannot install both versions.

    Most of the programs will install without problem in a 64-bit version of victory, there is very little that will not be installed on Windows 64-bit.

    You install programs as usual, you don't need to change any settings or install to anywhere other than their default locations. -C' IE you do not manually select the x 86 folder or any other folder.

    If the program you are installing has the ability to install a specific version of bit, and it does not work, then the problem is that options program installers, you must contact the program support

    A retail version of Office 2010 also comes with two versions of ILO.

    Having a 64-bit version of victory does NOT mean that you need to install 64-bit Office, in fact MS recommends that stick you with 32-bit Office (reason being compatibility with various plug0ins Office)

    And of course the 32-bit version of win only supports 4 GB of memory

  • How can I make my AVCHD mov. files of work first pro?

    I used the Panasonic HDC-SD60 for a short film for the work.  This has on about 40 clamps with about 3 hours of footage however when I import files .mov from the audio media browser seems fine but the film is in a kind of slow-mo and out of sync. I want to change and make the post production using Adobe pro and AfterEffects first. However, the film seems to work in final cut X. There is no lag with playback on quicktime either. What is this project? I read on variable frame rates, it is seems more common among iPhones and tablets? Is this something that the panasonic do as well? Is there a solution? Or should I jump ship and settle for a somewhat more limited features of Final Cut?

    Copy the card hard disk. Do not use iphoto or lightroom, but ingest directly in first via the media browser.

    See how it will work.

  • How can I make graph waveform or file with two different values of DBL Dynamics excel?

    As described in the question, I have two sources dbl from a load cell and linear actuator (from remote). I want to do a curve of load/displacement of the readings of the strength of the load cell and the readings of travel of the linear actuator. Load cell generates an analog signal that can be acquired by data acquisition and the actuator is delivered with a Board and a program of VI to control speed and measure the movement of the actuator at a sampling frequency of my choice. Is it possible that I can do a VI where he continues to collect data and build the chart I'm looking for?

    I think I see where the confusion is.  Looks like your trip data do not come directly from a sensor (LVDT, etc.), but from the control software.  If this is the case, you're stuck sort with a timing of software, that will not sync at all.  Still not really sure what the entire Setup is - but if you do not have access to data of travel other than VI control that drives the actuator, you have limited options.  It depends on where these data comes from and how it is treated.  My initial comment assumed medium of moving a sensor in another Board (Non-OR).

    You can absolutely use a shift register data (or the node property history given in the table of waveform - as someone else suggested) to save the data in the file.  Use the entry in the File.vi worksheet.  There are examples that show how to do this.

    I would start by trying to start the process (movement and data acquisition) as close to simultaneously as possible, let them operate independently, but at the same time, then after you have some data you can see if they are synchornized well enough for your application.  If you put them both in the same loop with while avoiding (wait ms) you will get incoherently timed data of these two sets of data.  Better to use examples of hardware when clock you can.  If your test article moves very slowly, it may not matter how you do it.  If it does not quickly move, will be discussed as your data of force tip line upward with your data points in moving closer in time.

    Good luck!

    Kurt

  • How can I make my finished edited file not too zoomed in?

    I work at a dentist as dental educational videos, I was recommended to adobe Premiere pro! But now I've got my head around how to use it and most of my videos edited have been coded I find that the modified version has been expanded in an equitable manner that makes my videos look blurry and too close-up. I can't really see how to solve this problem, but all it; p would be widely accepted as I am in a block of total mind!

    Thank you Jay

    Jay - Jay,

    When you make new project, you set the global settings for the entire project. From CS4, your next step may be to put in place the first sequence. With CS4, former global project settings were alleviated, that one can have (chronology) sequence settings that differ from each other. With CS5, there are two choices: this first sequence, choose a preset that corresponds to the sequence of 100%, even if they need to use the Preset Desktop, which allows for most settings to customize, OR we can choose to NOT set up this first sequence of configuration. Instead, they can import their sequences and just drag one of those to the new icon at the bottom of the project Panel, allow PrPro to create a new sequence, which corresponds to 100%. With your images, this is the method I would choose. That you will get a predefined sequence, which corresponds to your images, so no zoom-in images or black bands around it.

    Good luck

    Hunt

  • How can I make the text in all the boxes down following objects when the text box is changed from 1 to 2 lines?

    Hi people Muse.

    I'm faced with a problem of text box:

    At the bottom of my page, I have the title "ACTING ERMUTIGEN ZUM". Without any manual adjustment, I was happy to see that the text box pushes down the following objects as soon as the title Exchange of 1 to 2 lines. Point out clearly: I didn t add any point to stop or change any additional settings to achieve this, it just happened automatically and that's exactly what I want to happen.

    To my confusion, I can´t find a way to apply this behavior for the second title 'COURAGE OBSERVES UND LOSEN. It s on the same page. When I drag the breakpoint controller in the design-time view from the left to the breakpoint 900 pxor do it in the browser after export of the site, the title changes from 1 to 2 lines, as assumed, , but then the next Don t objects react and stay in the same place they stay when the title takes only 1 line.

    You will find the site on businesscatalyst:

    WILLKOMMEN

    I´d appreciates your support very well. I m sure it s not a big problem, but after an hour of re - try and control and do not receive a millimeter in advance, I thought, he could be one of these 'Don t worry - here comes the solution'- Muse hero there, read this. What you...? ;-)

    Thank you in advance.

    Moritz

    –––

    1st Title: everything works fine...

    Bildschirmfoto 2016-03-15 um 17.24.43.png

    Bildschirmfoto 2016-03-15 um 17.25.25.png

    –––

    2nd title: the 1200 px BP do everything ready...

    Bildschirmfoto 2016-03-15 um 17.26.13.png

    .. .but as I drag the marker of BP to the left just as I did with the title 1, the 2nd title doesn´t lower content:

    Bildschirmfoto 2016-03-15 um 17.26.30.png

    If you set the text block "ZUM ACTING... "sensitive width via the resizing control, rather than"Stretch to the width of the browser", which will provide the behavior you're looking for.

    We will study the design compared to the difference of the browser view. It seems that how items are grouped in resizing behavior is different in the case of elements with parameters width Resize mixed, in the mode of creation of the Muse and the browser.

  • Html5 Flash - How can I make a clip from movie internal slow down and stop when it happen a certain group?

    I'm creating a car braking system using flash, and I have a spin of the wheel. I want the wheel to slow down and stop after the brake pedal is pushed to a certain range. I know I could do with frame-by-frame animation but hoped there is a short cut - javascript? If not the party slowing then is the code to do just the internal clip (rotation of the wheel) to stop when it is in a frame. ? Thank you

    You can use the ticker class to create a loop that allow you to control the rotation of the wheel or a framework, TweenJS v0.6.0 API Documentation: Ticker

  • How can I make use of TC partitions and make sure that the file analysis is on the right partition?  I do not see the partitions that I have done in the Finder, but I can drag and drop the files in the folder 'Data' unique under Finder/Shared/TC.

    MacBook Air, OSX 10.10.3, 128 GB; 2 TB Time Capsule ME177LL/A.

    Final objective: use Time Capsule as a Time Machine for my MacBook Air and as a storage solution for large files that I don't want permanently on my MacBook Air.

    So far, I've implemented the TC and set up Time Machine on the TC.  I was able to create 2 partitions on the TC using disk utility then that TM was a backup and the disk was recognizable in disk utility.

    Under Finder/shared, I see the TimeCapsule 'airport', and when I click on it it is a file called "Data".  I was expecting to see my two partitions here.  Under 'Features' is a ' Zissou31 MacBook Air (3)"sparsebundle file and I can also create folders here and drag and drop files on the TC here.  I can see the partitions in disk utility, but how do I see/use the partitions I created in the Finder?

    I fear that this may not be set up correctly and I'm either losing on an entire partition I created or these files dragged/dropped may be at risk of overwriting of TimeMachine.  How can I make sure that the file analysis is on the appropriate partition?

    I disabled TimeMachine and go back to see if I could 'point' to one of the partitions, but the "Data" folder is the only thing that TimeMachine seen.  How do I point time Machine for one of the partitions?

    Thank you!

    In addition, in disk utility, I can see one of the partitions TC is related to the time Machine, indicated by the icon Time Machine green bottom left, but two partitions seem to fall under "Zissou31 of the MacBook Air (3) .sparsebundle.

Maybe you are looking for