Similar Questions

• How can I use the AppleCare with replacements USA helmet in Israel?

  How can I use an AppleCare with replacements USA headphones for my iphone in Israel 6plus? Am I covered overseas?

  Technically, no. The warranty is valid only in the country where the phone was originally sold. However, that restriction is based on the differences between the models of phones sold in different countries and the availability of substitutes service. You may very well be able to get the headphones replaced here since there is no difference between those who were included in phones AND those that are included with the phones sold in your country. Make an appointment at the genius bar or take it to your local CENTER and see what they can do for you.

• How can I use my photo albums as screensaver with Apple TV 4th gen

  How can I use a photo album that I created as a screensaver on the generation of Apple TV 4 because it is not an option in this sense?

  What follows is the Apple TV 4 user guide...

  Screensavers

  Apple TV displays a screen saver when it remains inactive for a predefined number of minutes.

  Air screensaver shows beautiful videos of slow motion of the places of the world, upload to an online server, making the screen saver more engaging and dynamic. For the antenna, you can control how many times Apple TV check and download new videos.

  Change the frequency of aerial screensaver download. In settings, go to general > screen saver and select Download New Videos, and then select an option.

  Return by using Apple TV. When the screen saver is active, press the contact surface to get to some app have been previously using.

  Choose a different screen saver. In settings, go to general > screen saver and select the Type. Then select the screen saver you want to use.

  Select the photos to display. Many of the screen saver options display a slide show of photos - it can include photos provided by Apple, or your own collection stored in iCloud. To choose which photos are used, in the settings, go to general > screen saver and select the Type. Then choose one of the types of screensaver-photographers.

  If you choose my Photos, the Photos app opens. Follow the instructions to put photos as screensaver.

  Set the screensaver time-out. In settings, go to general > screen saver and select the setting starts after, and then specify a number of minutes. This indicates to the Apple TV to start the screen saver automatically if the unit has been idle for the specified time.

  Activate the screen saver immediately. Press the Home button to go to the home screen (if it isn't already), and then press the button twice.

• I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  You can not. Try to return the unit and get your money back. There is absolutely no way for you to unlock the device,

• How can I use external speakers with my MacBook Air?

  How can I use an external speaker with my MacBook Air? I have a Samsung wireless speaker.

  They are Blue Tooth? If Yes, then you need to pair by using the preferences of BT.

• How can I use an ipod nano that was synched to another computer?

  My daughter gave me his 2nd generation ipod nano because it is no longer use it.  When I plugged in my USB to load, I got a message informing me that there is an update.  It would not be updated beause "ipod cannot be updated because it contains files that are used by another application."

  What should I do to be able to use this ipod nano?

  I don't think that this message is related to the iPod is synced to another computer...  It is usually other applications or processes on the computer (which is not iTunes) accessing the iPod for some reason if iTunes is not able to perform the update.  However, your question in the subject heading ("How can I use an ipod nano that was synched to another computer?") is valid, since the iPod was previously used by someone else, with a different iTunes library.

  If you want to start using this iPod with your iTunes library and put on your songs, instead of doing an Update, you need to restore.  This erases the iPod, reinstalled the latest version of the software, and sets it to the default settings.  The iPod gets a 'new beginning', as when it was new.  To resolve the problem with this "files in use by another application" error message, try restarting your computer.  Immediately after the computer finishes starting up, run iTunes, plug in the iPod (if it isn't already) and try to do the restore (or Update).  If you still get this error message, please after return.

  If you are restoring, you can configure it to sync with your iTunes library.  You can post back, if you need advice on options for the implementation.

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

• How can I use a Laserjet 5 p on a new windows/7 Desktop?

  Hello!
  I want to install a new Office HP/Windows 7 64 - bit to replace my old Office XP.  How can I use my printer HP Laserjet 5 p printer?  I know that I need a USB / parallel, but how can I get a usable driver?

  Thank you, Nick

  Hello ntl99;

  As it is a commercial product, I'll make a quick suggestion. I will suggest to post in the forum for HP Business Support for a better chance to find a quick solution.

  You will find the commercial Council of Laserjet here.
  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

  Hope you find the help you need;
  RobertoR

• How can I use my legal license instead of the cracked version of Windows 7

  Windows 7 Cracked Version

  I use windows 7 cracked version of geniune microsoft but I bought the license for my windows and I don't want to use cracked version more, how can I use my legal license key?

  It cannot be that simple. If windows is cracked with the loading of a hacker program, the charger must be removed.

  Make sure that the product keys match the edition of windows.
  Personally, I would install a legitimate copy of windows. You never know what is contained in a pirated version.

• How can I use HP SureStore to back up my entire drive, including records of other users on the PC?

  How can I use HP SureStore to back up my entire drive, including records of other users on the PC? I have a Windows System 7 and currently, only backups HPSS my file user rather than the rest folders of the users (family members). I do not see where in the feature options where I indicate that I want to include all users in the backup files.

  burtech wrote: How can I use HP SureStore to back up my entire drive, including records of other users on the PC? I have a Windows System 7 and currently, only backups HPSS my file user rather than the rest folders of the users (family members).

  I do not see where in the feature options where I indicate that I want to include all users in the backup files.

  Hello burtech, I wouldn't recommend using the HP backup program or the Windows backup program to backup my system.

  There have been many members who have reported many problems, try to restore the files by using these programs.

  I suggest you to acquire a hard drive image software. These programs can do a mirror image of the hard drive and save it in another location, on a second hard drive or an external hard drive.

  If the system is damaged, just insert a CD in the optical drive and boot the system, select the hard disk image and restore the system as it was when the hard disk images has been created. It takes less than 30 minutes, depending on the speed of your system.

  You would need to make a new hard disk image from time to time, according to the Windows updates or other changes to your system. I usually do one at least every week, or more often if necessary.

  I use Acronis for that purpose, but there are several other very good programs that do the same thing as well.

• How can I use my credit card of the United States in Israel to buy Creative Cloud?

  How can I use my US here in Israel credit card to buy Creative Cloud?

  Thanks for your advice.  It turns out that I contacted Adobe sales direct and at the moment they change my Adobe to an American account, one to match to match my credit card.

• I have a boxed version of Lightroom installed on my PC. How can I use creative cloud without having to pay for it?

  I have a boxed version of Lightroom installed on my PC. How can I use creative cloud without having to pay for it?

  Despite some similarities (current and temporary), lr 6 purchased is not equivalent to lr cc.

  But if you bought lr 6 during 30 days you can exchange it for a subscription of cc of lr: http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

• How can I use the search option in the pdf file in my mobile? [Android]

  How can I use the search option in the pdf file in my mobile?

  Yes, the text search is also available on Android Acrobat. After you open a PDF file, look in the top bar of the magnifying glass icon. If the top bar is not visible, tap anywhere on the screen to make it appear again.

  Thank you

  Acrobat DC team Mobile

• How can I use the sequence of the string "\u00e5" in myfile.txt converted unic

  How can I use the sequence of the string "\u00e5" in myfile.txt converted to unicode in my application?
  
  I have a text file, MyFile.txt, with some sequences represented unicode:
  \u00e5
  \u00e4
  \u00f6
  etc.
  
  This is the file contains unicode, not the character it represents: a, a and o.
  I get the sequence of the file and save it to a vector. When I tried to use it on a JButton, I see the "\u00e5" string and not the character that I assumed.
  
  

   
          read file codes ...
          ...
       Vector<String> glyphVector = readGlyphIndex.getUnicodeFiles();     // to retrieve the vector with unicode sequence and save it to glyphVector
       String unicode = glyphVector.get(0);     //get the first unicode sequence
          System.out.println(unicode);    //displays \u00e5 and not å in the console.
       jButton.setText(unicode);   //jButton is a JButton and it shows the string \00e5 and not the character å
          ...

  The question is how to convert the sequence of string to be a unicode escape in the code?
  
  In order to make it clear:

  //from
  jButton.setText("\\u00e5");
  //to
  jButton.setText("\u00e5");

  Thanks in advance!
  
  Dragonfly

  String s = Character.toString((char) unicodeInInt);
  

  Strictly speaking, if unicodeInInt is a Unicode code point (for example, it can be greater than 0xFFFF) then the correct code would be this:

  String s = new String(Character.toChars(unicodeInInt));
  

  However, since the "\u" notation allows only 4 hexadecimal digits (and need to 0xFFFF code points > Unicode represented by their UTF-16 encoding), the code above is not enough for this particular case.

• How can I use NetStream?

  How can I use Netstream for local playback if possible?

  Be sure to check the issues NetConnection, sandbox. They are mentioned with the NetConnection.connect() documentation .

  NetStream to read an external file by progressive download or Flash Media Server. You might find the Flash 8 FLVPlayer Pro component a way to go if you need video control. But just to have a progressive download game you can watch the NetConnection.connect() documentation or copy the following code: