How can I move pictures to time capsule

Similar Questions

• How can I move my old TIme Capsule at the new Time Capsule backup files?

  For five years, I use a 2 TB TC. It is also the main router wired into my local network.

  Have the new TC even router feautures?

  If I buy the new TC I would like to transfer the backup files stored in the current TC. Is this possible? How?

  Thank you very much for your support.

  Beppe53

  1. Yes.

  2. click here and follow the instructions.

  (144542)

• How can implement you not with Tim Capsule and AirPort their simulation on the iMac?

  Hello

  How can implement you not with Time Capsule and AirPort their simulation on the iMac?

  I don't know what you're asking.

  AirPort Extreme is a wireless router.

  A Time Capsule airport is an AirPort Extreme with a built-in hard drive for data storage.

  An iMac is a Mac computer.

  An iMac is not a wireless router, so he is unable to perform the functions of a wireless router.

• How can I move pictures to the pictures folder

  I'm a new mac user.  I've migrated all of my documents and photos from my old PC.  How can I move the photos in the HOME folder the photos on the iMac app?

  In the Photos app, go to the file menu and select "import...". ». Then select the pictures in the folder.

• How can I connect my Airport time capsule to my WiFi network so he just backup my Mac and not extend nor want to be a base station

  How do I connect/install my time capsule airport to my new WiFi network so she just backup my Mac and not to extend my WiFi or want to be a WiFi hotspot

  There is no way to connect a TC to a wifi network. It must be connected by ethernet to the main modem or to the router.

  I don't understand what you're asking...

  If you want that the backup more wireless computer... How the TC cannot work as Wifi hotspot... It's impossible.

• How can I find missing backups time capsule?

  Installation of El Capitan in September caused my incoming mail to stop after a certain point, although he showed millions of so-called items waiting to be downloaded. After many attempts of troubleshooting, I went with my last resort for fitness and do a clean install of El Capitan.

  When I went to my Time Capsule to restore my documents and applications showed none of my previous backups using the Star Wars. There are available dates in the timeline view, and the time Capsule shows my oldest as backup being December 1, 2015 after I ran the backup check, but I don't see anything beyond yesterday.

  Backups must be present on the Time Capsule, because it shows "tuberculosis 1.14 2 TB available." My sparsebundle (only 13.2 MB) indicated no mountable file system when I double click on it. It also has . tmp.sparsebundle as the extension. There is no other sparsebundle showing.

  I was looking for answers online and this forum and have yet to find a resolution. My first care in disk utility failed after a few hours, then immediately when I tried again. Any suggestions? Is it useful to fitness again? I did not choose the time Capsule to restore initially. I wanted to see if the mail would work before putting the time restore everything.

  Thank you

  Linda

  MacBook Pro (early 2011) El Capitan 10.11.3

  Time Machine, please press the shift-command-C key combination. The windshield will show the mounted volumes. All snapshots should now be accessible. Select the one you want and search for files to restore.

  If you need to restore from a backup of the hidden user library folder, first select a snapshot, and then press shift-command-G. A go to the folder dialog box opens. In this document, you enter the path to the folder. The dialog box will help you by automatically filling parts of the path when you start typing.

  The path starts with the slash character ("/"). Enter that. The rest of the parts is separated by slashes.

  The next part is the date and time of the current snapshot. Enter a '2', and the rest of the date should be filled in automatically. Press the right arrow key to access the end of the path. Enter a slash to start the next game.

  Next is the volume name (usually "Macintosh HD" unless you assigned a different name.) Start typing, then jump to the end and enter a slash.

  The next part is 'Users', followed by a slash.

  Then is your short user name. It is also the name of your home folder, which is represented by an icon of the House in the sidebar of a Finder window.

  Finally, enter "Library", and then press return. You should now be in the library folder. From there, you can move like in the Finder. You can also select another snapshot of the same folder.

• How can I connect my Airport time capsule to the nbn optus

  I just got the NBN Optus connected and time capsule doesn't seem to work, can anyone advice on how to connect. I connected to a modem (Sagem Fast 38640op) with cable but the mac does not expect a return to the top

  You should do a full factory reset on the TC...

  Repeat the installation... and it should work correctly in bridge and create a wireless network.

  The Sagemcom really poor wireless but you can leave it on... use it for your network wireless of comments.

  This is my normal configuration guide... but there are a few specific pieces to network problems with the operating system later as Yosemite or El Capo.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

  Let us know how you go.

• How can I move using Audio time units?

  I am to change a sequence of multi track and the audio is slightly out of sync. I changed the rule to take into account the Audio time units, but if I try to drag the clip AV manually or using nudges it will only move by a minimum of 1 full frame. Is there a setting I can change to get moving instead of the Audio time unit? Change preferences > Trim did not work, either.

  You must move the video and audio. Video will only pass in frames.

  A boost in Audio Units is 1/48000 seconds.

  On boost in a regular schedule is a picture.

• How can I move a picture of an event / Moment?

  How can I move a picture of an event / time to another in the same album?

  I am often confused about the difference between an event and a time.  Please forgive me if I'm using these terms incorrectly.

  I, (pictures) selected, top left, it says, 'Moments' in the header at the top of the page.

  I have 4 images in a row under "April 17, 2016" immediately below these 4 images, I have 1 image also under "April 17, 2016".»   With the good old iPhoto, I could simply drag the single image below, on the date above (with 4 images in a row), and that would give me 5 consecutive images.  Then, now empty it event / time would disappear.

  Just trying to consolidate my images in a logical way for me.

  Thank you.

  You can not.

  The library 'Photos' and 'Pictures' albums are automatically organized function import or taken the place and date.

  In the Photos, the equivalents of iPhoto events albums. This is where you can organize your images as you wish.

  You should find this message by another Member of this community very informative:

  Photos 2.0 vs iPhoto 9.6.1: features and capabilities

• How can I move multiple photos to a new folder I created without doing it one at a time?

  How can I move multiple photos in a new file instead of a folder a time? I've been clicking and dragging each photo in the folder of don't. I have to be a faster, more simple way and I can not find this way

  Post proposed by the facilitator for the appropriate forum placed

  First, select the photo and press Ctrl and the C key at the same time, when you press the fences to hit keys Ctrl and V photos simultaneously.

• How can I move a picture of PES 10 to 5 Lightroom?

  How can I move a picture of PES 10 to 5 Lightroom?

  Hi Farlaner,

  Please visit the following link: How to import photos from Photoshop Elements, other Lightroom catalogs or applications like iPhoto

  Let me know if it helps.

  Kind regards

  Tanuj

• How can I move my head in the exact measurements of time?

  Relatively new to AE and want to know how can I move my head in the exact measurements in time.

  For example in a 59.94 project, I am to 01:00:14 and want to return 36 executives. In Premiere Pro I just type "-36" and I jump back 36 frames.

  I tried in AE and it went to 36 images in the comp. basically before my ever started time line. I tried '. ' " "" ' 0.36 ' "36.0036"with identical results back to-36 before the beginning of the model.

  Does anyone have a solution? I can't find it in the manual.

  Thanks in advance

  of after effects using:
  "To move forward some time or number of frames, click the display of the moment and then enter a plus sign (+) followed by the timecode or number of frames to advance." For example, enter + 20 to go forward 20 images or 01:00 to go forward one second. Precede the value with the sign (-) to go back. For example, enter +-20 to go backward 20 frames or + - 1:00 to go back a second. »

• How can I move my pictures to items 9 in CS6?

  How can I move my pictures to items 9 in CS6 in my iMac?

  Nothing really to do. If you have CS6 you bridge. Simply run Bridge and all the photos on your hard drive will be there. Double click on any thumbnail to change in CS6.

  It can help to write metadata of photos in the Organizer, if you used that. It should then appear in the bridge metadata pane.

• How can I move a photo from camera raw in photoshop?  When I click Open a picture I get a checkerboard

  How can I move a picture of editing in camera raw in photoshop?  When I click on "Open image" I get a checkerboard in photochop

  "ACR" is Adobe Camera Raw, which is that you open your images with. You make all changes using Camera Raw, or simply open them? If you are editing in Camera Raw, what happens if you use the standard file > Open option, instead of opening as...

  Another thing, you'll want to do, is to make sure that everything is up to date. This includes Windows 7, Photoshop and your video card. All the these can play a role in the issue of the checkerboard.

• I have 8 64-bit windows. my volume icon is no longer in the area of the taskbar. It's in the settings. How can I move this back to the taskbar. contacted hp three times. no help from them.

  I have 8 64-bit windows. the volume icon is no longer in the toolbar area. It's in the settings area of the computer. How can I move this back to the toolbar?

  Hello

  I don't know why it would be... does show the taskbar when you are on the desktop?

  As a last resort, you can try the "turn system icons on or" and "restore default icon behaviors."

  The parameter "turn system icons On or Off ' applies only to the taskbar...