How can I perform a clean boot in Windows XP?

Similar Questions

• How can I perform a clean installation of Windows XP Edition family?

  How to do a clean install of xp with the drivers download and windows updates so no internet not downloaded

  Hello
   
  1. have you installed Windows 7 with Windows XP?
  2. is this a new installation?
  3. What is the blue screen of death error code number?
   
   
  Method 1:
  Step 1:
  
  Check if the problem persists in safe mode, to start the computer in safe mode follow the article mentioned below:
  
  Link, please refer to: start your computer in safe mode:
    
   http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  
  Step 2:
   
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
  Method 2:
  
  Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly
  See the link: http://windows.microsoft.com/en-US/windows7/Startup-Repair-frequently-asked-questions
   
  Reference:
   
  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• How can I perform a clean installation of Windows 7 HP-recovery?

  Hello

  I recently bought a Pavilion DV7-6150eo opportunity, and it came with a clean install of Windows 7. In order to get the correct drivers, and system tools, I would install the Windows HP-image, if possible. Where can I find it on the computer, if possible? Or I have a HP recovery kit sent me physically?

  If not this, then what drivers should I make sure to get from HP.com section 'Support & drivers '?

  Thank you

  Sebons.

  Hello

  Installation of HP discs are validated by reading a "tattoo" on the bios, so the media since another laptop will not be installed.

  The easiest option would be to order a set of recovery discs using the link below - replacement cost vary depending where in the world you live, but they are generally inexpensive...

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you just want to keep the current installation, you must really check in Device Manager to see if anything is missing or has an error icon you can see that all the necessary drivers are already installed.

  Kind regards

  DP - K

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• I loaded the preview of Windows 8 developer, how can I do a clean install of Windows 7?

  I was stupid and has not implemented a partition on my HARD drive.  I have to do a clean install of Windows 7, which is not too painful because my computer is new.  But I can't seem to start from the disc.  I changed the order in my BIOS but windows 8 charge even without even giving me a startup disk option.

  Hello JordanLeavitt

  Do not try to boot from the Windows 7 support. Instead of starting the Windows Developer Preview and then put in the disc of Windows 7. Run the Windows 7 Setup program and follow the installation process of Windows. I would like to know if it works for you. Thank you.

  EDIT: You end up with a Window.old folder on your C: drive. It's the Windows Developer Preview. You can delete this folder.

• How can I perform a full backup on Windows XP?

  Hello everyone, I need to perform a full backup on Windows XP. I use Windows XP Professional SP3 x 86 as my current operating system. I wonder how do you and how many DVDs I need to use. I didn't need any estimated time. I have 1.99 GB of memory, a 3.20 gHz Intel Celeron Chipset CPU, and a player Samsung DVD-RAM made up of a desktop computer. If someone out there can answer, please let me know ASAP thank you if you answered.

  -Jordan "skypedog" talking

  Hi Jordan,.

  You can follow this link & check if it helps.

  How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista

  Hope the helps of information.
  Please post back and we do know.

• How can I get a clean copy of windows vista Home premium. I've never had a disc, but I have a registration number?

  My computer would not start. I never received a boot disk. I used my friends boot drive and now windows think my computer is a Dell. The registration key for my computer does not work. How do you get a clean copy, I am owner of Vista already?

  Hello

  as you have discovered the recovery discs are brand and the specific model

  Here are the different ways to reinstall vista:

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I perform a safe boot into OSX 10.11.2

  I upgraded to OSX10.11.2 two weeks ago, I now have a gray screen, which suggests a software conflict or fonts with some legacy applications. Is it a Safe option in OSX10.11.2 start? And if yes how?

  It's the same as previous versions of Mac OS X, hold down the SHIFT key during the startup of the carillon.

  OS X El Capitan: start in safe mode

• (Redirected) How can I do a "clean install" of Windows 10 on my 32 GB tablet which has limited space C drive?

  My conference table 8 has 19 GB for the C drive and 7 + GB of unallocated space. I want to install Win 10 but can not remove enough files to get 3 GB of free space for download to win 10...

  Best of this post in the forum Windows 10 here:

  http://en.community.Dell.com/support-forums/software-OS/f/4997

  Bev.

• How can I get FreeCell to boot under Windows 7?

  I've recently upgraded from Vista to Windows 7.  After the upgrade the games included in the Games Explorer (which worked fine in 64-bit Vista) appear in the window but does not start.  I have no error message or other problems when I double click the icon for FreeCell, for example.

  Hello have Der Theo, you changed the system to stop the shortcuts arrows that appear?  Which is known to cause problems with the Games Explorer.  If you have, I would recommend using System Restore to restore your system before when these changes were made.

  To ensure that the game is to try to work launch directly from the Start Menu, not from Games Explorer and see if that works and post back with the results. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• How can I perform a new installation if I don't have an installation or a backup disk. Vista is on my laptop when I bought it and there is no installation disc.

  How can I perform a clean installation on a laptop if I don't have an installation disc? Vista Home Premium was already installed on the laptop when I bought it. Somehow, all of my documents have disappeared and by clicking on the icon start shows not all programs as it did before. The only way that the broadcast of programs is by placing the arrow on "all programs". How this can be corrected and how do I recover lost files?

  Hello

  you do not say what led to losing you your documents

  This would apply to you? :

  read the information at the bottom of the below link about what makes this malware hide your data files and the cure for it regarding

  Read article 17

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

  also follow the correct for that malware removal steps, just to be safe, let's

  _____________________________________________________________________

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _____________________________________________________________

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Can I transfer my old regsitry to a new installation of clean boot of windows 7

  Can I transfer my old register to a new installation of clean boot of windows 7?  If so, how this is done?  Without a transfer, it is necessary to reinstall all my software and it is very time consuming.

  You will not be able to transfer all the registry settings. Unfortunately, you will need to reinstall everything.

• How can I stop Vista to boot into safe mode? Vista does not meet F8 when starting upwards.

  How can I stop Vista to boot into safe mode? Vista will not run on F8 before Windows starts.

  Update: I did system restore and still Vista boot in safe mode. More, start > run > "msconfig" > tab "Startup" and "Safeboot" was not selected. Any other suggestions?

  Vista still restarts in safe mode. 'Safe Mode' will now appear in the four corners of the screen and "Microsoft (R) Windows (R) (Build 6001: Service Pack 1)" appears at the top to the center of the monitor. ???

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Win 7 (Home Premium) - perform a clean boot, but a not to connect to wireless internet

  Hello

  Recently, I have a problem downloading a file corrupted Win 8 Set Up of MS Website.

  Among the proposed solutions is to perform a clean boot in:

  http://support.Microsoft.com/kb/929135

  I did, but immediately I couldn't connect to my broadband wireless Internet.

  I intend to download the clean Win 8, install it on my PC and create a reinstallation DVD according to the selected option.

  Can a clean boot mode burn a Re in ISO Image installation DVD?

  Is there a way to activate Internet in safe mode?

  If I uninstall my Antivirus 3rd party program and disable MS Security essential without having to boot into safe mode, is there a good chance of successful installation?

  Thank you

  Hello

  Yes, autoconfiguration WLAN service is WLAN services I mentioned. Sorry for the inconvenience caused.

  It will be useful.

• How can I perform a recovery of the system for a mini HP?

  Original title: System Recovery.

  How can I perform a recovery of the system for a hp mini?

  Hi waynemeyer,.

  1. why you want to make a system restore?

  2. you have a question about your computer?

  3. you have installed on your computer Recovery Console?

  If you try to restore the factory settings, you will need to contact the manufacturer of the computer for help.

  Contact HP

  Hope the helps of information.
  Please post back and we do know.