How can I prevent others to connect via the internet

Similar Questions

• Unable to connect via the Internet to my ESXi server. Help, please

  Hi, I had a server ESXi 4.1 at home. When I try to connect via the Internet, it is not working.

  I put ESXi server to firewall and still, I can't ping my server even.

  No idea why?

  Kind regards

  Pawel Lenart

  Sit behind your firewall router esxi, transfer 443 to esxi management IP and ensure that management network vmkernel has the internal IP address of router as its default gateway.

  http://blog.peacon.co.UK

  Please give points for any helpful answer.

  Unofficial list of transfer USB devices work

• What kind of virus won't prevent you to connect to the internet and how do I get rid of him?

  Having been on my computer for hours very well, I left to pick up my girls from school, and my window was open to yahoo.  When I came back, the computer was off.  I tried to turn it back on and it wouldn't do anything.  the fire came, but it never came.  After you play with it for a bit, I finally managed to do turn it on, but it does nothing else.  I can't get into all programs and I can't connect to the internet.  After a few fault-finding with cox for more than an hour, they determined that I have a virus.  What kind of virus can put your computer completely out of use and how do I get rid of him?

  Hello

  stops a lot of malware connect to the net

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You should also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  make it work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• Why can I not use itunes connected with the internet?

  I use itunes on my windows 7, my PC is connected to the internet, but I can't use itunes. Yet, I can use itunes without the internet, how did this happen? Then I can't use it to access the itunes store.

  Hi nakama2016,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are experiencing these problems with iTunes on your Windows machine. If you are able to launch and use iTunes, but are not able to sign in to or access the iTunes Store, or other functions of the internet, you will find the troubleshooting steps in the following article useful:

  If you cannot connect to the iTunes Store - Apple Support

  Concerning

• How to know which programs are connecting to the internet?

  Hello

  How to know which programs or files are connected to the internet, including files and programs Microsoft?

  Thanks and greetings

  In Windows 7, use Ctrl + Shift + Esc instead of Ctrl + Alt + Delete. It lets you in the Manager of tasks more quickly. Select the performance tab, click the resource monitor and Network tab.  Network connections are included.

• How can I prevent other users to view documents and files Admin?

  I just found out that the other a user accounts can access files Admin by going to Documents > Computer > OS(c:) > utilisateurs > Admin > et voila un accès complet àles fichiers admin???) Interesting the other user account cannot access this way.

  How can I block access?

  Hello

  (1) is the other user account, a Standard user account?

  (2) does the user account have admin rights?

  (3) using any network share files?

  (4) did you change on your computer?

  I suggest you follow the link and check.

  Method 1:

  Why use a standard account instead of an administrator account?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-use-a-standard-user-account-instead-of-an-administrator-account

  Method 2:

  I suggest you follow the links and check how to stop sharing a file and folder.

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-with-someone

  Share files and folders on the network

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-and-folders-over-the-network-from-Windows-Vista-inside-out

  Http://windows.microsoft.com/en-US/windows-vista/File-sharing-essentials of file sharing essentials

• How can I find my Tablet connected to the laptop

  How can I find my tablet on my pc, I use a next book 11 and I can't find my Tablet anywhere

  Original title: find devices

  Hello

  Thanks for posting your query in Microsoft Community.

  have a. you plugged your tablet on a network or with the USB cable?

  b. What is the brand and model number. your computer?

  If the Tablet is connected successfully then the tablet should appear in the window of the computer or in the file Explorer navigation pane. Press the Windows key + E to open the computer window and check for external devices.

  If your tablet is connected via a network, I suggest to see the next procedure and check if you are able to detect your tablet.

  1. Press the Windows key + C, click settings, and then select change PC settings.
  2. Type and click network, and then set the cursor to Find devices and content .

  Additional information:

  Why can't I connect to other computers?

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• How do you keep users to connect via the desktop remotely on another?

  Use: Windows 2008 R2
  Connection method: connection Remote Desktop

  We have users insist on granting of their login and password to another user if that person can connect. Even when they have their own login!

  So what happens is the the two #1 can be saved in on the job server all log in user #2 in the server, with the same login, closing at #1. While I can only educate them to use their own connections, so the saying goes, you can lead a horse to water, but you cannot make them drink. :(

  What I have and I'm not finding, is a way to have the system notify User #2 that login is already in use, try again later.  I would like to accomplish this through Group Policy.

  Thanks in advance for any help!

  Jack W.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• My computer has happened in a power safe mode and I cannot restore without rebooting. How can I prevent this from happening on the Vista operating system?

  My computer suddenly goes into safe mode of power and I am not able to restore in normal mode without rebooting the computer. How can I stop this from happening? My OS is Windows Vista Ultimate 64-bit.

  Thank you

  JO Ann

  Hello

  You should be able to solve this problem by activating the mode Hibernate in the command prompt. If she hibernates, it will save an image where you are on your hard drive and you will be in business once the power returns.
  You must also make sure that your power options would spend in hibernation mode when the power is lower at some point.
  1. Click Start and type 'CMD '.
  2. Right click on CMD and run as administrator.
  3. Click on continue when you are prompted.
  4. "Type in the command prompt" "" powercfg.exe /Hibernate on.
  5. Go to the options to be able to enter the control panel by typing in "Power Options."
  6. You will see the different power options. The one you have selected, that's what you are currently using. Click on "change plan settings".
  7. Click on "change power avancΘs."
  8. Scroll down to the battery and you will see the options of low battery and critical battery responses. Make sure they are set for the hibernation.

  I hope that after these steps, your problems. Please let me know if you have any questions.

• How can I prevent people from seeing where the email has passed since?

  How can I stop showing where email is transmitted from

  How can I stop showing where email is transmitted from

  Select and then delete the addresses in the e-mail message.

  And when you send an email if you do not want your visible list of recipients used the bcc function.

  http://ask-Leo.com/how_does_using_bcc_help_reduce_spam.html

• Captivate 5-accessibility-how can I do questions Quiz accessible via the keyboard instead of the mouse

  Hello.

  I am trying to build an Accessible e-Learning module using Captivate 5.

  Can I use < Tab > and < enter > to navigate through the slides view and Table of contents.  However, I can't so far using just the keyboard to access and respond to questions of Quiz, which is true/false, Multiple choice questions.

  The user must be able to select the answer and click on send, using only the keyboard.

  How can I do in Captivate 5?

  CB.

  I tested it on a slide in question choice multiple in Cp5 and 5.5.  I tried only preview/5 slides so it's maybe different after being published and displayed in the browser.

  The first was a multiple-choice questionnaire.  When I tab it goes in the title of the question down through each of the responses, then moves to the Clear/send button I on the slide.  Using the SPACEBAR to substitute for a click seemed to work.

• Since the installation of Windows Vista SP2, my HUAWEI 3 G Modem hsn can't been able to connect to the Internet.

  When trying to connect to the program says can't connect the device is offline or unavailable. I checked the device manager updates are all topical. I tried to uninstall the drivers, but the program to uninstall, it ran for more than an hour and no changes. When you unplug the modem (USB) it always detect on.
  Can someone help me solve this annoying problem.
  Thank you

  Hi just_how84,

  Welcome to Microsoft answers community forum!

  You can uninstall the Service Pack and check if you are able to connect.

  Link to uninstall SP2: http://support.microsoft.com/kb/948537

  Could you try uninstalling and reinstalling the drivers?

  Here is the link to do so: http://www.microsoft.com/whdc/driver/install/Uninstall.mspx

  Alternatively, you can perform a clean boot:

  Measures
   
  1. Click Start, click Control Panel, click System and Maintenance, click Administrative Tools and then double-click on the System Configuration.
  2. click on continue or provide administrator credentials if prompted.
  3. click on the general tab, and then click Selective startup.
  4. under Selective startup uncheck load startup items.
  5. click on the Services tab, check the skin all Microsoft services, and then click Disable all.
  6. click on apply, then click OK and restart

  Follow the link for more information: http://support.microsoft.com/kb/331796 . In addition, refer to the section on how to restore your computer to a Normal startup mode
   
  In addition, if you don't have already done, please make sure that your network card drivers are up to date by visiting your site for manufactures of network card.
   
  I would also suggest that you scan your hard disks for viruses and malware.
   
   
  I hope that this information is help!
  Let me know if it did

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• How to establish a local router connection through the internet

  How can I establish a local always on connection router through the internet.  I would like to be able to access our local wireless network when you are away from the office.

  Thank you!

  The major goal of a router with internet is to protect the network from attacks through the firewall. The last thing you want to do is reduce this function.

  If you want to access services on specific systems, you can transfer individual ports of these systems. Thus, for example, if one of the internal devices runs a web server you can before port 80 on this device.

  However, if you want to make your PC to appear as if it is on the local network, then that requires the use of a VPN tunnel, which depends on the capability of the router.

• How long should a computer be connected to the internet for activity at work?

  I have the laptop of my son with a nonadministrator account set up in family safety.  My son rarely connected to internet (no wireless).  When it connects, it's usually to print her homework.  I know it's a network activity, but very little.  Family safety always reports that there is no activity (web, application, etc.).  I tested his account and I know that it works correctly.  My hunch is that it is not stay connected long enough for that follow-up activity to work right.  Please notify.  I have a similar situation with my daughter, but she spends a little more time on the internet.  His reports seem to be more accurate than my son.

  Hi JTB_GP,

  Security for the family needs a consistent internet connection to make it work properly. The parental control client relies heavily on this so that the settings of the site and the activity on the computer are sent to both ends. Since your son is rarely connected to internet, settings and information from both ends cannot be synchronized properly. We are unable to determine how long you must be connected to internet for the parental controls work properly.

  Thank you!