How can I prevent the shutdown task scheduler engine, get the new display detected to work and avoid receiving the message "Internet Explorer has encountered a problem and stop"? __

Similar Questions

• When I click on a video file in Windows Explorer, I get the message "not found xvidcore.dll', shortly followed by the message" Windows explorer has encountered a problem and needs to close. "

  original title: xvidcore.dll not found.

  Nice day

  When I click on a video file in Windows Explorer, I get the message "not found xvidcore.dll', shortly followed by the message" Windows explorer has encountered a problem and needs to close. "  The screen becomes blue white.  I am operating Windows XP SP3.  Any advice much appreciated

  Thank you, Brian Newman

  No guarantee, but it might be interesting to try to download
  and install the XviD Codec:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  XviD Codec
  http://www.xvidmovies.com/codec/
  (name of the file to download: Xvid - 1.3.2 - 20110601.exe)

  Good luck...

• I started getting the message "windows Explorer has encountered a problem & needs to close".

  I started getting the message "windows explore has encountered a problem and needs to close" when I try to run my camera videos but there always used to work OK

  Hello Terry,

  I would recommend from your computer in safe mode to see if the problem persists. If you do not experience the problem in safe mode, it's probably caused by a startup item. To isolate the problem, please perform a clean boot. I also recommend scanning for infections and update your drivers.

  * I'm moving your thread to our performance under xp forum

• How can I fix the following error; iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.

  AppName: itunes.exe AppVer: 10.5.2.11 ModName: ntdll.dll

  ModVer: 5.1.2600.6055 Offset: 0000120e

  Hello

  What version of the Windows operating system is installed on your computer?

  It seems to be a problem with iTunes, some system files in iTunes is missing. I suggest you try to uninstall and reinstall iTunes and check if it helps.

  Step 1:

  Uninstall a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Step 2:

  Install a program: http://windows.microsoft.com/en-US/windows7/Install-a-program

  If the methods mentioned above do not help, then it would be best to contact Apple iTunes to get help.

  Get the apple customer service: http://www.apple.com/support/itunes/

  Hope the information is useful.

• Whenever I try to download a file, I get a message that the internet explore has encountered a problem and need to close. Can someone explain why this is?

  Whenever I try to download a file, I get a message that the internet explore has encountered a problem and need to close. Can someone explain why this is?

  What Service Pack for XP are you running?  You use Internet Explorer 7 or 8?   If so, you can try this article to see if it solves your problem:

  "How to reset Internet Explorer settings"
    <>http://support.Microsoft.com/kb/923737 >

  HTH,
  JW

• I just tried to open Photoshop CS6 and received the message that photoshop has encountered a problem wth the display driver and has disabled the improvements by using graphics hardware. Where can I access the update to correct the problem that t

  I just tried to open Photoshop CS6 and received the message that photoshop has encountered a problem wth the display driver and has disabled the improvements by using graphics hardware. Where can I access the update to fix the problem because the link does not show?

  You will have to go the website of the manufacturer of your graphics card and download the current drivers.

• error message "Windows Explorer has encountered a problem and needs to close" on click with the right button in my computer

  I had this problem for awhile now.  After I receive and send the error report my computer is blocked and I have to finish by WTM. I tried to start in safe mode and it was ok there and when I restarted in normal mode it was ok for the rest of the day, but when I put the computer today the problem reappeared. Dr. Watson is also sometimes with an error message.

  I am running XP with MS and updates.

  Would appreciate some advice.

  Chris

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song...).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
  You can Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5 at a time), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know that an extension of this group of 3-5 is the culprit in order to start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.  In this way, you can switch back and forth, enabled to be sure, you have the right extension under control.

  Disable them one at a time until your right click on do not generate an error, then restart and test again to make sure the changes 'stick '.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• How can I process the message saying that there is a problem with certCredProvider.dll?

  Whenever I turn on the computer, I get a window saying that there is a problem with C:\Windows\system32\certCredProvider.dll. What can I do?

  Hi JKittleson,

  1. What is the exact error message?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 provided in the above article.

  Method 2: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Let us know the results.

• How can I fix the message Macromedia Projector has stopped working

  I bought two vessels CD which is fine until I want to print, and then I get the above message.

  I've had enough of ti menmort run the program. I have 98 GB free. I use the latest version of Adobe Flash Player and my laptop uses windows 7 64 bit Firefox browser.  I have only a little cranky warned and don't know what to do to solve problem.   Help please?

  the download is a self-extracting zip file

  Right-click on it and extract here

  If your two deeper directories paste it into the root for now

  then run hpzstub this will bypass the step of projector

  Good luck

• Why the message (wuauclt.exe has encountered a problem and needs to close) when I start the computer?

  Operating system - XP

  Message asking if I want to send the problem to Microsoft.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• I think the ultimate Media Player is originally internet explore has encountered Aproblem, how do I solve this problem

  When using my computer and log on to a program I often get "internet explore has encountered a problem and needs to close."

  All my attempts to solve this problem have failed. The information I found says it could be caused by a recently installed program that was the ultimate Media Player. All attempts to uninstall it failed and I do not know if this is the problem.

  Hello

  1. what happens when you try to uninstall the program?

  2. you receive messages or error codes?

  You can try running the fixit from the following link and check if you can uninstall the program.

  Solve problems with programs that cannot be installed or uninstalled

  You can also read the following article and check if it helps.

  How to solve problems when you install or uninstall programs on a Windows computer

• How can I prevent the access denied message when you use the shutdown command?

  I use shutdown /m \\computername/s

  I have "Access denied (5)" as an answer.
  I am admin on all my computers. Same username and password on each of them.
  How can I get this shutdown command to work remotely, so I can't access every computer command prompt via Remote Desktop?
  How can I prevent the access denied message when you use the shutdown command?

  Hello

  I suggest you to report this issue in TechNet Forums for Windows 7 networks: http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/threads

  Thank you.

• How can I prevent the Thunderbird goes directly to the next message after you delete that I read?

  How can I prevent the Thunderbird goes directly to the next message after you delete that I read? I want to return to the list of all incoming mail, so I can choose what email I open then. I could see something that I don't want to open at all, but the way it is set up right now, it opens the following email automatically.

  Thank you. I don't want to download an add-on, so I tried the messages pane, and I guess it will do. I used Thunderbird a few years ago and he used to have an option where it would go after deleting a message during the consultation in its own window. But I think I can live with this option. so thank you once again.

• I use to manage my DSL modem via an ip address. When I enter FF8 I wonder where to save the file. Why and how can I prevent the FF8 to do this?

  I use to manage my DSL modem via an ip address. When I enter FF8 I wonder where to save the file. Why and how can I prevent the FF8 to do this?

  And now, whenever I'm in an ip address that I wonder if I want to download the file.

  This happens when the modem server does not send the file in text/html, but with a different MIME type.
  
  I tried adding index.html in the event that the server can send this file as text/html.
  
  If your DSL modem has a support Web site, then you can try asking it there advice on how to configure the server modem.

• How can I prevent the password window open when I do not use a password

  How can I prevent the window from opening at startup password when I don't use the password system

  Look in the general tab of the preferences system - security & Privacy - and see if the box named disable auto login is enabled. In this case please uncheck it.