How can I reformat my drive hard when I'm away from my windows vista disk?

Similar Questions

• How can I get a driver for my dell pocket dj to my windows vista

  where can I get a driver for my dell pocket dj so I can sync it to my windows vista?

  Hello

  Here is a link to Dell drivers and downloads of software for you.

  Follow the prompts to find these drivers

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection

  And here is a link to the Dell Support Forums.

  They should be able to help you there.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• How can I erase the drive hard when I can't read the screen of the monitor?

  I need to wipe the hard drive and reinstall windows xp but I can not "cmd" promp because I can't read the monitor

  What do you mean that you can not read the monitor? Is the black screen or it seems weird when you start the operating system? And why do you need command prompt to reinstall an operating system?

  You need not be inside an operating system to reinstall.

  1. Insert the installation disc and turn on your computer
  2 watch it down or up for orders of F access the BIOS (usually F2) or the Startup Manager (usually F12)
  3 power on the system again, then press the button once Startup Manager as a couple at the time wherever you turn on the computer.
  4. Select the CD/DVD drive as the boot device
  5. a screen will come in saying to press a key to boot from CD (so press a key) and the installation will begin.

  If you don't have a Boot Manager, then you must start in the BIOS or Setup and move the CD/DVD drive up to make the first boot device.

• How can I use my drive hard thunderbolt from 8 TB to backup all my wireless devices?

  How can I configure my drive hard thunderbolt from 8 TB to back up all my devices using a Wi - Fi connection?

  What you might hope better would be to use a Thunderbolt-to-Ethernet adapter to connect to the router, but even if it works, it would be like a fire (Thunderbolt) connection to a water hose (Ethernet) is launching... and expect to get more water on the hose... more, the best that can be done without wire will be about half the speed of the Ethernet network.

  Sorry, this is no sense... a Thunderbolt drive is designed to connect directly to a Thunderbolt port on a computer, or in a Garland with other devices Thunderbolt.

  In other words, as soon as you break the chain of connection Thunderbolt, the speed drops to Ethernet or even low speed wireless.

• How can I reformat a drive

  I was backing up my computer for the first time, it took many many records.  I think I want to just save photos, documents and contacts.  How can I reformat the RW disks so I can reuse them and how to back up only the files?

  I was backing up my computer for the first time, it took many many records.  I think I want to just save photos, documents and contacts.  How can I reformat the RW disks so I can reuse them and how to back up only the files?

  A little off topic...

  I strongly suggest that you buy an external hard drive and do you backup files on it.
  With an external hard drive, you can set up a schedule of backup files. All you need to do is turn on the computer > plug the drive Ext. hard and let the computer do the backup when the calendar.
  You can leave the computer unattended and want you want to do.

  Nowadays, an external hard drive of 1 TB of capacity can be had for less than $100, and I quote in Canadian dollars. And I use one.

  Imagine that you have to go through the computer for HOURS, feeding the machine with DVD whenever he asks.
  I remember he had time, I could not complete backup of files because the computer kept asking for disk #3 while I was on the disk #5 etc.

  Personally, using DVD for backup of files, it of a waste of your time, childcare of the computer and the loss of your money to buy the DVD.

• How can I change the drive on which my library is located in Windows 7?

  It seems that 'Library' in Win7 is what was used to be called "My Documents" in XP, right?

  It used to be %HomeDrive% on Windows XP would determine where the "My Documents".  I have built a Windows 7 computer and created two volumes on my boot disk... they are C: and F:.  I want to put just the operating system and of my applications on C: and what was used to be called 'My Documents' on the F:.

  How can I do this?

  Thank you.

  It seems that 'Library' in Win7 is what was used to be called "My Documents" in XP, right?

  It used to be %HomeDrive% on Windows XP would determine where the "My Documents".  I have built a Windows 7 computer and created two volumes on my boot disk... they are C: and F:.  I want to put just the operating system and of my applications on C: and what was used to be called 'My Documents' on the F:.

  How can I do this?

  Thank you.

  The library is a container.
  Move the Documents folder on the F drive (right click on Documents, properties-map) and the library /should/ re - point himself at this place.

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• How can I retrieve or recover my file "Download"? I have a Windows Vista 64 - bit operating system. Thank you?

  I have Microsoft Windows Vista 64-bit operating system.

  I have lost my file "Download".  How retrieve/recover my file "Download"?

  Thank you

  Elliott

  e-mail: * address email is removed from the privacy *

  Hello

  1. did you of recent changes to the system before the show?

  2 are. what file download you referring?

  3. have you deleted the file using option DEL or SHIFT DEL?

  Method:

  If you have downloaded the file with success and deleted, I suggest you to check if the files are in the trash and check if it helps.

  If you are not able to find the files in the Recycle Bin, you can use all of the third party tools and check if you can recover the files.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  In addition, for more information, see the link below.

  http://Windows.Microsoft.com/en-us/Windows7/recover-lost-or-deleted-files

  Let us know if it helps.

• How can I make sure after failing the first time, that update for Windows Vista (KB973687) has finally installed successfully?

  I did an update for Windows Vista Service Pack 2 and it has failed with an error code of 80070026. How can I check and see if this update might have gotten resloved?

  Go to start > run > type

  winver

  Click OK

  What Service Pack are told it is installed?

  UTC/GMT is 19:41 Tuesday, January 10, 2012

• How can I erase the drive hard so that I can sell my HP Pavillion/Windows XP/3 GB ram/512 MB hard drive?

  I need help wiping my hard drive, so I can sell my computer

  Hello

  You can use the process below to completely erase your hard drive, but you must have your game that recovery disks to reinstall the operating system if you want to sell it with XP installed.

  Download and install Killdisk on the link below - (this application will write zeros to the entire disk).

  http://software.lsoft.net/KillDiskSuiteFree-Setup.exe of

  Download and install ImgBurn on the link below.

  http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html

  Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.

  During the following process do not worry about all warnings as your recovery DVDs will reformat the HARD drive.

  Insert this CD into yout laptop. Close Notepad, and then start again to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.

  A brief description of the process here is Killdisk.

  Use it to wipe the entire hard drive, Select (80 h) and press f10 (you will also need to type a confirmation and press enter) - ( This will make sure to include all of the partitions , and then start the process - this may take a few hours!).

  When the process is complete, remove the CD of Killdisk, insert your first HP recovery disc and restart the computer to start the installation.

  Kind regards

  DP - K

• How can I reformat the drive of the Satellite Pro A100?

  I have a Satellite Pro A 100, that my son has used for more than a year in College!
  There is so much junk on I think that a reformat would be the easiest option for erase everything.

  However, I can't find any way to do it. I tried the usual methods. Start, Control Panel, Admin etc, but the format option is always deleted.
  I even tried to run, using 'format C:', but was informed that the reader was already in use and could not be formatted.

  Suggestions, please.

  AND, I need a CD from Toshiba to replace all the files of Toshiba, or they are in another partition on the HARD drive?
  Thank you very much

  Hello

  You need a CD of the OS or the Toshiba Recovery CD to format the HARD drive and reinstall the operating system.

  The Toshiba Recovery CD contains the image of Toshiba. It s a package which contains the OS, driver Toshiba, tools and additional software.

  I would recommend using the Toshiba restore for formatting and reinstallation CD.

  And the best is that you would not need to install the drivers because the Toshiba Recovery CD to install everything in one step!

• How can I back up my whole system programs and files to a windows vista external hard drive

  Can someone give me a step by step to my entire system backup - programs and files on an external hard drive.

  Thank you

  In this case, you will need to purchase another product like Acronis True Image or are looking for a free software on sites like Filehippo download.

  I'm not able to recommend a particular product.

• How can I mount a drive hard macbook on an imac?

  Hello

  I have a start 2011 15 "macbook pro that upward and died suddenly last night. Some preliminary research suggests that it is probably the logic board. I expect to be able to get the files on the hard drive (it's already been replaced once!) on my iMac. Both were under OS 10.8.4. The hard drive I use in the laptop is a 500 GB Seagate portable thin SSHD. I took out the hard drive and used a SATA Adapter USB to connect it to the iMac but I get the following error: "the disk you inserted is not readable by this computer."

  Is it possible to recover these files or am I stuck with a giant, useless paper weight? No, I had not run a return upward in some time. No, unfortunately I don't have the money to get fixed logic board, if that is indeed the problem.

  Thank you in advance!

  Why not buy an external enclosure for this drive? Check if OWC (macsales.com) maybe you adapt to your player.

  Just find the corresponding site:

  https://eShop.MacSales.com/shop/hard-drives/external-enclosures/2.5-inch-drives-HD-SSD

• How can I know which drive hard connection will fit in my XPS 400?

  Hello. I'm looking for more space and more speed from 400 XPS under Vista 32 bit.   Because I have a Pentium D 2800 core duo and 4 GB of ram, it seems to me that the last reasonable upgrade is a bigger drive.

  It currently has a WD 160 GB with 8 MB buffer.  My wife says that it's slow.

  In addition, the ones I see on Tiger direct shows SATA 300. Is it the same as normal Sata?    All are sata drives compatible with the specification xps 400?

  Option A): Western Digital Caviar SE16 640 GB hard drive - 7200 RPM, 16 MB, SATA-300, OE. $80.

   

  Option B):Hitachi sister 7 K 1000 1000 GB hard drive - 7200 RPM, 32 MB, Serial ATA-300, OEM.  $110 after rebate.
  

  1 TB disks seem to offer with 32 MB.  The 640 GB has only a case of 16 MB.   Assuming 640 GB is enough space, is it better to get the 16 MB buffer or is it useful to switch to a memory size 32 MB buffer? I get a pop in performance?

  Thank you!!

  Stu

  Message edited by sikerr on 03/10/2008 20:13
  Message edited by sikerr on 03/10/2008 20:13
  
  

• How can I remove USB drive safely when there is no icon 'remove hardware safely '?

  Re HP Pavillion Notebook PC, Windows 8, 64-bit g7.   I want to be able to remove a USB without shutting down the computer.  There is no icon for "Remove hardware" as on other computers I have.  I was not able to find the program or its icon by using the 'search' or 'Find'  It is not indexed in the user guide.  Suggestions?

  Use the method presented in the video.

• How can I change the drive letter of the cd/DVD/BD in windows 8

  The only thing that appears under device management is hard drives.  Optical drives do not arise as they did under XP or 7.

  In Windows 8, the optical drives are listed in the Device Manager under CD/DVD-ROM drives.

  In windows 8, the drive letter assignments are made in the disk management snap-in in.

  Access

  Control Panel\All Control Panel Items\Administrative tools

  Computer management

  Disk management

  Highlight the device in the list, click the icon to the left of the list on the right left

  In the context menu, select change drive letter and path.

  Follow the on-screen prompts.

  If the devices are not listed, shut down the computer to the power off. Wait a minute. Restart and check again.

  Tom Ferguson