How can I restart windows xp media center edition when I lost the drive but still have the product key

Similar Questions

• I, ve lost a family Vista Edition installation disc premium, 64-bit, but still have a product key #. Where can I get a drive? Thank you

  Mobility Center is not working properly

  Hello

   

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Can I install Windows XP Media Center Edition 2005 without disk

  I have a computer I bought in 2005 and my hard drive required just to be erased neutralize caused by a virus. I need to reinstall Windows XP Media Center Edition 2005, but can not find the drive from anywhere. Is it possible to download or request another copy of the disc, I always have the product key as well

  Please see: How to replace lost Microsoft software

• Failed hard drive... How can I reinstall Windows XP Media Center 2005

  I have a Dell XPS 400 equipped with Windows XP Media Center 2005 system is installed.  The hard drive has failed.  I have never created a backup copy.  Any way to get this OS so I can reinstall it?

  Call Dell.

  1-877-293-1197

  Have your Service Dell number number available

• Windows Vista Media Center crashes when I change the channel

  Original title: Windows Vista Media Center

  Since the beginning of June whenever I try to change the channel on the TV tuner in Media Center it crashes. I tried to do a system restore but restore never worked on my count. Problem event name: APPCRASH. Application name: EHShell.exe I'm looking for suggestions that might solve this problem.

  1] updated TV Tuner card driver. Visit the manufacturer's Web site and download and install the latest driver.

  [2] delete the file mediaCenterDataStore.db. By default, this file is located in the following location:
  %SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB
  
  Delete: -.

  Start > run > type in %SYSTEMDRIVE%\ProgramData\Microsoft\eHome\mediaCenterDataStore.db > OK.

  Locate mediaCenterDataStore.db and right-click on it, select Delete.

  Restart the Media Center.

  S.Sengupta Media Center MVP

• I can triple booot Windows XP Media Center edition, Windows 7 RC1 and XP Professional?

  I installed Windows 7 in another partition on my hard drive with windows XP media edition Center on the other. I want to install a new copy of XP on another partition but windows will start Manager work with 3 installs OS.
  Thank you

  Mattacrazy108,

  You can have three different installations of an operating system to boot from. However, that being said, if you have installed Windows 7 it would be no easy way to get the third XP OS on the machine. You must uninstall the current two operating systems on your computer. From there, you would need to format and install first either XP Pro, then Media Center verse or vise. After these two operating systems have been installed, you can then install Windows 7.

  I hope this helps. Let me know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I stop windows 7 displays a message when I open the software: the Publisher could not be verified. Are you sure you want to run this software?

  I use this software regularly and the provider is very reliable!  All odeas please?

  Thank you

  Lance

  Hello

  I suggest you to follow the steps and check if it helps.

  (a) open up the Group Policy Editor

  (b) go to User Configuration > administrative templates > windows components > Attachment Manager

  (c) in the pane on the right double click on do not store the zone information in attachments

  (d) select enabled, and then click ok.

  (e) in the right pane, double-click the file type inclusions list low

  (f) select Enabled and then copy and paste the below extensions exactly in the Options and press ok

  .avi;. beats;. com;. cmd;. exe;. htm;. HTML;. MPG;. MPEG;. MOV;. MP3;. MSI;. M3U;. rar;. Reg;. txt;. vbs;. WAV;. zip;

  (g) release group strategy.

  I hope this helps.

• I lost my disk, but I have my product key for windows xp pro, I do do__

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Contact Microsoft: http://support.microsoft.com/contactus

  Replacement Disk(CD/DVD): "to request the replacement of hardware or software, contact the Microsoft Supplemental Parts team"
  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/fb8230d4-000F-4ee7-b732-c9f8fff28bfd

  For versions Windows OEM that pre-installed with the computer, contact the factory support team.

  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Update for Windows XP Media Center Edition 2005 Rollup2

  Received the following error message when you try to connect to XBox Live. "There is a problem with the installation of Windows XP Media Center Edition 2005.  Uninstall the update for Media Center Edition 2005, and then re - install the update from the Windows Update site. Re-run the installer to XBOX 360. »

  I uninstalled the update for Windows XP Media Center Edition 2005 rolllup2, but when I go to Microsoft to reinstall, I am sent to install Windows 7.  I am using Windows XP and do not want to upgrade to Windows 7.  How can I get the update to Media Center Edition 2005 for Windows XP?  I can't configure the XBOX 360 without it.

  Hi Frustratedalso,

  Follow the steps listed in the link below: error message when you try to install a program for the Xbox 360 Media Center Extender in Windows XP Media Center Edition 2005 with Service Pack 3: "There is a problem with the installation of Windows XP Media Center Edition 2005": http://support.microsoft.com/kb/954622

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Try to install the Update Rollup 2 for Windows XP Media Center Edition 2005 - on SP3.

  Hello

  All this started when my Xbox360 is dead, sent it for repair, came home another, all hung up and tried to connect to the Media Center. Of course, it did not work and the screen says to uninstall? (something), I forgot today, it has been a long road since then. BUT I uninstalled Update Rollup 2 for Windows XP Media Center Edition 2005 and updates that came after. NOW realize it was a mistake, I'm not of the Update Rollup 2 for Windows XP Media Center Edition 2005 on your computer. And I'm confused regarding why, for the first time, that I can't find a single KB article on this problem.

  And even if I did not restore the system off, there is no restore point on my machine.

  So I'm always searching in google and microsoft.com but a little lost right now.

  Moccan,
  Thanks for posting on the Microsoft answers Forum.  I would like to know if you read this article for the hotfix rollup: http://support.microsoft.com/kb/900325.  In particular the section more information, which has this:

  If the 886904 update is installed, you must uninstall the 886904 update before you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005. Otherwise, the installation of .NET Framework 1.1 SP1 will fail.

  To determine whether the 886904 update is installed, follow these steps:

  1. Click Start, click run, type appwiz.cpl, and then click OK.
  2. Click to select the Show updates check box.
  3. In the currently installed programs list, look for the following element:
     Fix for Microsoft .NET Framework 1.1 (KB886904)

  If you see this option, you must remove the hotfix. To remove the patch, click Microsoft .NET Framework 1.1 Hotfix (KB886904), and then click Remove. Then, visit the Windows Update Web sit to download and install the Update Rollup 2 for Windows XP Media Center Edition 2005.

  If you haven't checked out on this yet, then follow the steps below and let us know the result. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

  Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
  Last updated October 3, 2006

  Important notes before starting:

  1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

  2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

  3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
  In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

  4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

  5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

  6 - notice of disclaimer
  I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

  Steps to follow:

  1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
  "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

  2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
  To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

  3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
  When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
  Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

  4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
  A Q896256
  DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
  B Q910437
  DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
  C Q889673
  DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
  D - Q896243 (very Important, this will make SD and MMC cards for work)
  DIFFICULTY "ADD Support high-speed SD card"
  Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

  5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
  (Restart your PC after Installation)
  Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

  6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
  Note: To avoid annoying Messages to drivers during Installation to do the following: -.
  Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
  Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

  7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
  Your Internet may need one of the following drivers (depending on your Modem)
  A if you your Internet through LAN then install the 'network' of the driver Cd driver.
  B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
  C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
  D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

  8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

  9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

  10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
  Atheros Client Utility "no need".
  Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

  Enjoy your PC powerful Qosmio Toshiba laptop.

  Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

  Ciao

• Windows 7 media center tv guide planning lost .dll

  My anti-virus found a .dll suspect something like a regular planning. I deleted the .dll file and it seems that it was necessary for the update to Windows 7 media center tv guide (now displays the available data). I have reset media center several times with no luck. Unfortunately, I can't restore to an earlier date or obtain the file from my Recycle Bin. I still have Windows 7 64 bit upgrade disk if I can find the name of the file and know where to copy it in.

  Thanks for your help,

  jqh947

  Hi jqh947,

  1. you remember which dll file has been deleted?

  I would say Mr scanner SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Xbox 360 and Windows XP Media Center Edition 2005

  Hello

  Hoping to get help with this, because I searched everywhere and had not found an answer.  All the work around the items, reference Windows 7 and 8 not XP my Dell Dimension C521 shipped with Windows XP Media Center Edition 2005 pre installed.  I've upgraded to SP3 of XP.  A friend of mine gave me his old Xbox 360 (bought a new unit).  When I try to connect to the XBox 360 I get an error message in media library "uninstall the update for media center 2005 and then re-install the update of the site Web of Windows update.  Then, re-run Setup for Xbox 360'

  I checked in my under settinds program control panel, but don't see any element for Media Center 2005, even with show checked all of the updates.  I don't see Media player listed and 2 updates for it.  I have disabled the Windows Firewall did not help.  The Xbox 360 test shows that I can connect to the internet, Xbox Live (no NAT problems) and PC running Media Center.  It fails on the media center connection test.

  I don't want to reinstall all of the Dell backup image software supplied with the camera, I'll have to back up and start over.  Any help is welcome!

  Thank you

  Matt

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
   
  I suggest for the link and follow the steps in the article:
   
  Error message when you try to install a program for the Xbox 360 Media Center Extender in Windows XP Media Center Edition 2005 with Service Pack 3: "There is a problem with the installation of Windows XP Media Center Edition 2005"
  http://support.Microsoft.com/kb/954622?WA=wsignin1.0
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows.
   
  Also see Help links:
  Turn your Xbox into Windows Media Center Extender
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Extender-for-Xbox
   
  http://support.Microsoft.com/ph/7024
   
  Windows Media Center on the Xbox 360
  http://support.Xbox.com/en-us/apps/Windows-Media-Center-on-Xbox-360/Windows-Media-Center-on-Xbox-360-Info
   
  I hope this helps.

• Mouse and keyboard no longer works in Windows XP Media Center edition

  I moved my Gigabyte Media Center and start the keyboard and mouse are are suddenly stopped working. Works very well to access the BIOS key and F8 for safe mode - has also no feature mouse keybpard or. So with any form of Windows I have no input control. It is not a problem with the keyboard because it works in start mode. Tried other mouse USB and keyboards all to nothing does not. There are no PS2 port on the machine. I found a few examples of this anomaly on the web, but no real answers. It looks like windows for mouse and keyboard drivers are corrupt? But how can I get reinstall - machine is defunct Evesham, I don't have a recovery disk or a serial number. Any help would be accepted with gratitude!

  Hi Keith,

  Thank you for your response and keep us updated.

  I suggest you run the fix from the link next and if it helps.

  USB devices stop working in Windows XP Media Center Edition

  http://support.Microsoft.com/kb/890546

  If the problem persists, feel free to let us know. We will be happy to help you.

• picked up my computer and does not, Windows xp media center edition service pack 2 update

  I got my computer and now it will not refresh, I'm under version2002 service pack 2 for windows xp media center edition, I did another time and of the load down a service pack and don't remember what you

  Hi DeirdreGrimes,

  Windows Update no longer works if you haven't installed XP SP3. To check your level of service pack system, click on start, run and type "Winver" in the Run dialog box and click on 'OK'.  If your system already has XP SP3 installed, you can try reset the windows update components by referring to the link below.

  There are prerequisites for the installation of Windows XP SP3. You can find them by reading the link below.

  Steps to take before installing XP SP3

  http://support.Microsoft.com/kb/950717

  How to reset windows update components

  http://support.Microsoft.com/kb/971058

  If your system does not already have SP3 installed, you can:

  Download and install XP SP3 fron the link below. (Ignore the warnings on THIS subject the professionals and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this is useful to provide feedback. Good luck.