How can I restore it to work again? Ity will restore to any point of control.
I tried to use Restrore at each checkpoint blackened. The message says: "cannot be restored to this point of control."
As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.
Not knowing the basic information a problem prolongs the frustration and the agony of these issues.
What is your system brand and model?
What is your Version of XP and the Service Pack?
The afflicted system has a working CD/DVD (internal or external) drive?
You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?
Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)? Remember that the system restore is not a time machine.
Have you ever used the system restore to restore your system in the past?
Describe exactly what happens when you try to perform a system restore and the error messages you see which indicates that it does not work.
Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
For example, if you use Norton/Symantec products, you will see a message like this:
Restoration incomplete. Your computer cannot be restored...
It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore. Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore. It works for some configurations.
System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore. This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore. You don't have to reinstall XP, only the part of system restore.
That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
Give these ideas some consideration if they apply to you.
Sometimes malicious will afflict your system restore to prevent you to find and remove malware. It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
No matter what you use for protection against malware, I do so and then only begin to solve any problems:
Download, install, update and do a full scan with these free malware detection programs can solve any problems:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
It can be uninstalled later if you wish.
The scans by operating clean, reboot, test and we can fix any other issues.
Tags: Windows
Similar Questions
-
How can I get my volume works again, ive lost somehow
How can I get my volume works again, ive lost somehow
How can I get my volume works again, ive lost somehow
====================================================
The following links may be worth a visit:No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
(Win XP / Vista / 7)(307918) how to troubleshoot sound problems in Windows XP
http://support.Microsoft.com/kb/307918/en-GB -
How can I get these buttons working again?
Hey guys, I formatted my Y650 and got all my drivers/buttons working again EXCEPT these buttons. Should what software/drivers I install to get this working?
Thank you
Note of the moderator; Photo > 50K converted to create a link
Share my discoveries, can be useful for someone else...
1. with "Lenovo\Energy Management\start_utility.exe" (utility.exe) running the Volume buttons / Mute will not work on Windows 7. Order of start up programs is not serious. Tried to stop all processes of Lenovo - buttons work, run the exe file - do not work.
2. There is a dependency to start between 'Lenovo\OnekeyDM\OnekeyDM.exe' and 'Lenovo\Energy Management\Energy Management.exe. DM must be started before EM, otherwise OneKey Theater button will not work. To resolve this problem, I did the following steps:
2.1 installed tool Startup Delayer (freeware, there a lot of them, don't remember how special I used).
2.2 set DM to start before EM with a delay of 2 seconds to do the work key OneKey Theater.
After that, I work Volume / Mute, OneKey Theater buttons in Windows 7, however nice windows icons of Lenovo to change volume/brightness do not appear (because we have removed the Windows Autorun "Lenovo\Energy Management\start_utility.exe"). However, I think that this Mute button is more important to you, right?
-
It installed fine but it does not acknowledge all of my material, i.e. monitor, modem... the monitor works but some weird setting. Is there a solution or a download that I can burn it to a cd to allow my computer to run properly again?
You need to install the drivers from the manufacturer of your PC, if a brand of large surface or a laptop, if not by the creators of individual materials, for example, your motherboard / graphics if its own card, etc.
-
I used some weird tips on the internet go to the preferences and delete these files in order to reset the midi, but now it doesn't work at all.
Help, please.
These files are still in the trash? If for open trash, right-click on the files and select back up. If you empty the trash, you can try to re-setup of logic.
-
How can I get my printer working again?
If Microsoft, you did for me once again!
An hour ago I tried to scan a document on my Lexmark 5650 4 in 1 printer. All of a sudden Microsoft Update came and downloaded the new drivers AUTOMATICALLY!
First off the coast of the update has bee turned off for about two years now, because of all the grief it has caused in the past, so why he suddenly came I cannot explain, but I digress...
NOW MY PRINTER WON 'T FUNCTION AT ALL, it will not copy, print or scan and there is no locking up on top of me.
I tried to run a system restore to return to a time before the update, but does not either because it says that my antivirus program interfere with the restoration. I disabled the antivirus and tried to restore again. NO LUCK.
WHAT DID YOU DO FOR ME?
Help, please!
Thanks for all the help guys. I ended up going to my internet security technical support to solve this problem, they did online with assistance remotely.
Unfortunately, the internet security company had recently made an upgrade and where they used to have their own firewall they now use Windows Firewall and imported their own settings. There lied the problem, the firewall was blocking all communication between the computer and the printer/scanner.
It's fixed now, thanks.
-
How can I restore ibooks third point manual?
Hey,.
I received a few books of third party in iBooks, I backup them and I need to restore the clear system which is THE captain now and I'm not able to use the Migration Wizard because the system is broken... and I did not Time Machine... so please don't tell me not just to connect and download or use just Migration Wizard or just use Time Machine I just need to restore items at the bottom of the location in manual
/ Library/containers/com. Apple.BKAgentService/Data/documents/iBooks
I tried is I copy the items from the Source to the Destination in the same place that above, but I don't see the makings of iBooks... then I tried to import the items in iBooks, but the dialog who say you haven't enough allow, would you please tell me just how to restore elements of iBooks from the location of manual? Why apple make it uncomfortable so... ?
Thank you very much!!
Hello? why there is no righteous person here...
-
WinDVD didn't work at all - how can I restore it
Hello
WINDVD does not work
How can I restore it? On WINDVD website, they say ask the seller computor, but I have not found how to do on the Toshiba site.Thank you
Hello
WinDVD is a part of the image of Toshiba and cannot be installed or reinstalled separately.
If you want to install it you need to use the recovery CD. This recovery CD will set the laptop to factory settingsBut make sure that the installation will format the partition or HARD drive
-
my front USB drives hsve stop working. How can I restore them?
My front USB disks have stop working. How can I restore them?
Hello
Please use the following thread only:
http://h30434.www3.HP.com/T5/forums/replypage/Board-ID/DesktopQA/message-ID/31803
Thank you.
-
How can I restore host windows Rundll32 processes that stopped working?
Original title: the host process Rundll32 Windows
How can I restore host windows Rundll32 processes that stopped working?
Hello
This is probably the result of malware then do a very thorough check and when the
the system is clean see the following message to remove this error.If you need search malware here's my recommendations - they will allow you to do a thorough check and removal without ending up with a load of spyware programs running resident who can cause as many questions as the malware and may be more difficult to detect the cause.
No one program cannot be used to detect and remove any malware. Added that often easy to detect malicious software is often accompanied by a much harder to detect and remove the payload. So its best to be now too thorough than paying the high price later. Check with them to an extreme exaggeration, and then run the cleaning only when you are sure that the system is clean.
It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the in the Windows when you can.
TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN it will show infections in the report after you run - if it will not run change tdsskiller.exe to tdsskiller.com name. If she finds something or not does not mean not, communicate with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and use scanners online and other methods.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGEAdwCleaner
http://www.bleepingcomputer.com/download/adwcleaner/
Run the malware removal tool from MicrosoftStart - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans, rootkits, etc.) that have infected your computer despite all security measures you have taken (such as the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspxScan online ESET
http://www.eset.com/onlinescan/Scan Kaspersky online
http://www.Kaspersky.com/virusscannerOther tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1=======================================
For extreme cases:
This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
uses aggressive methods to detect these threats, there is a risk that it can select some
legitimate programs for removal. You should use this tool very carefully and only after
you have exhausted other options.
http://us.Norton.com/support/DIY/index.jspI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
How can I restore my acer aspire x 1301 again?
Acer aspire x 1301
How can I restore my acer aspire x 1301 again, I have no disk Windows 7 and do not know what to do?
Acer recovery instructions:
(1) power on the machine
(2) the BIOS ACER screen, press and hold down the "Alt" key and the "F10" key simultaneously to start Acer eRecovery.
(3) once the eRecovery utility appears, click on "Restore default settings".
4) click 'OK' to continue
(5) the recovery process to restore a fully functional Windows image.
(6) once eRecovery finished, press 'OK' to restart the computer.Acer Recovery Media purchase program: https://secure.tx.acer.com/RCDB/Main.aspx?brand=acer
This site is used for the purchase of your Acer recovery media.
To begin, please enter the serial number or the SNID located on your Acer product and click 'next '.Information System
Get information about your system: http://secure3.tx.acer.com/FindSystem/FindSystem.aspx?title=Information%20About%20Your%20SystemAcer Support main page: http://www.acersupport.com/
J W Stuart: http://www.pagestart.com
-
I was probed to always select "allow", "allow once" or "Block" for an incoming program. I accidentally click "block" and my program worked more! Please explain how I can allow the program to work again?
How can I reverse the error?ConcerningJollyJWithout doubt blocked by any firewall you have installed, that being the review of the cases of your firewall settings that relate to this program
-
I'm trying to install Acrobat 8 Std on a laptop computer that was in need of a restoration. He asks the file AdobePDF.dll since my Vista CD - I do not have. How can I get this file or another which will allow my Acrobat 8 work on this laptop with Win 8.1, which she did before restoring?
John,
AdobePDF.dll is in the file Data1.cab. Mine is located in C:\Program Files (x 86) \Adobe\Acrobat8\Adobe Acrobat 8 Professional\ You need to extract the file "AdobePDF.dll_64" from the .cab file. You can do this with WinZip or 7-Zip. Everything you need to extract is this file, nothing else... Once you have extracted it, remove the _64, so the name of the file is AdobePDF.dll. Then place the file in any location you want and run the program it when asked. For a file location, I suggest to C:\Program Files (x 86) \Adobe\Acrobat8\
Hope that helps.
-
InDesign CS4 using on iMac. EU to restore the backup computer. Licensing has stopped working. 150:30 error code. How can I restore my license?
You must install the Adobe programs since the original installation programs. Never migrate from a backup.
Activation Adobe should detect a computer when the material has not been changed.
If this isn't the case, you must contact Adobe support.
-
When I go to the library in CS6 again there is nothing in it. How can I get it to work?
When I go to the library in CS6 again there is nothing in it. How can I get it to work?
Operating system: Windows 7
He has already worked? No if yes, what has changed? : Nothing
Change recent system hardware or software? : no
Hi Fjols Dk
Please see:
http://helpx.Adobe.com/x-productkb/multi/library-functional-content-MI ssing.html
Maybe you are looking for
-
Here's my problem: whenever I open another tab, a return back to him, he gets just buggy. Which is not the case only in tabs, but also on an entire page like facebook or other... To better describe and look a photos...Things I've tried: re - install
-
HP 6005 Pro SFF: installation of three monitors on 6005 Pro SFF
PC currently has two connected. One using the built-in VGA port and the second using the displayport. Just install a new graphics card would solve this?
-
My iPod Touch 5 G 16 GB blue could not start. It was fully charged in running and when the last one used. The next time I tried to start it (30 min. later) it would not start. It is running the latest version of iOS. I tried the procedures of nor
-
HP spectrum 360 convertible: impossible to install the new BIOS
Asssitant de Support HP recommends urgent download and installation of the update SP74985 BIOS. seems to be able to download, but will not be installed. msinfo32.exe audit suggests current BIOS is American Megatrends Inc.. F31 15/01/2016
-
I use a HP pavilion g62101TU 32 bit OS. My wifi key which is f12 shows red and the network card is invisible on the Device Manager tab, and I am not able to access the internet from my laptop. Please arrive at any solution. Thank you