How can I restore the function of carrier on my iPad 2?

Since the last update, I've lost the function of carrier on my ipad2, I completed several resets hard.  A new SiM card makes a temporal difference, but the function of carrier went, once again.  I read that Apple messed up many iPhones but it seems

I know that the only one with a problem of the iPad.

AAnyone to resolve this, please?

I have this same problem on iPad 2 since the 9.3 update.  I have not found a solution, but I found a way to get the cellular network.  But if you turn off and then turn on the you will find that he is gone again and you must repeat the following work around.

1. turn off the power and remove the SIM card.  Then be able to turn it back on and it will ask for SIM card.  Insert sim card and it should find the network.  It's simple, but if you have a case that is a nuisance to maintain sideways.

second workaround solution.

1 go to settings and disable (mobile) data cell.

2 turn airplane mode ON.

3 turn off iPad.

4 wait about a minute. (Not sure if absolutely necessary)

5 iPad power on.

DISABLE airplane mode turn 6

7 activate cellular data.

You should then see a cellular provider box pop up under the cell data area and must seek and find your network.

It works on the iPad 2 and I hope that other iPads.

I noticed heavy battery drain less than 9.3 and when I ran my iPad in the condition of no Service, use of the battery is improved considerably.

Good luck.

Tags: iPad

Similar Questions

  • I lost my recovery for Windows Vista disk. How can I restore the computer to its original factory State?

    I lost my recovery for windows Vista disk. How can I restore the computer to its original factory State? I can't find how to create recovery discs, I did not have this option in the Recovery Manager

    Hello

    Here are the different ways to reinstall vista

    Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

    or borrow a microsoft dvd vista

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    Save all data, because it will be lost, do the above

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

  • How can I disable the function on my v5 acer inspire?

    OT : How can I disable the function on my v5 acer inspire where when you click on the mouse somehow your whole page disappears? It wasn't like this in one of my computers before windows 8.

    How can I activate noff functionality of mouse that causes your entire page to disappear when you click on it the wrong way .i have an acer v5 inspire.please help. Ive had a lot of computers, but this feature never appeared until the windows 8

    Please help its driving me crazy

    James m

    Hello

    Thanks for posting your query on the Microsoft Community.

    According to the description, I understand that you are facing problems with your mouse.

    I suggest you to refer to suggestions of Mohammad_Imran replied on 5 April 2013 and check if that helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-TMS/how-to-disable-swipe-gesture-on-touchpad/77c9e8c5-0C5A-4527-a60e-81e8168aec52

    You can also check:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-TMS/how-do-i-change-the-settings-for-my-Windows-8/a0349e35-B090-42fb-A586-feac551a0100

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • How can I recover the functions drag horizontal and vertical to center the portions of the image being developed? [was: Question]

    How can I recover the functions drag horizontal and vertical to center the portions of the image being developed?

    1 - question double deleted

    2 the name of the program you are using then a moderator may move this message to the correct program forum

    This forum Cloud is not on the program problem... help a program would be Photoshop Lighroom or Muse or?

  • How can I get the six digit code for my iPad Pro? I have two other iPads and an iPod but I enter the codes I get and the Pro is just off!

    How can I get the six digit code for my iPad Pro? I have two other iPads and an iPod but I get the codes I get and the Pro is just disabled for longer and longer whenever he rejects these codes!

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  • When a file turns to an ink file, how can I recover the functional file

    When a file turns to an ink file, how can I recover the operational files. ??

    Right-click on the link, check the location of the open file, find the file and either make a new shortcut or double-click the executable.

  • How can I change the order of files on an iPad?

    I know how to organize the files in folders. HIW do I change the order of the files? I'm viewing the latest iPad.

    Hello

    Currently, you can see the most recent opened file will be at the top of the list. And there is no option to organize the order.

    You can request for the function, using this link: Adobe Acrobat for iOS - feature request/Bug Report Form

    Kind regards

    Tariq Dar.

  • How can you restore the previous character that you used?

    Nice day!

    I accidentally clicked another character and it moved quickly, how to restore my previous character. I couldn't find something like
    "My characters" so thank you

    In order to switch to another character that you had previously installed, follow these steps:

    1. Go to Tools , then click on Add-ons (or click on the Firefox button in the top left, then click on Add ons).
    2. Switch to the appearance tab. You should find your personas previously used in the list.
    3. Find the one you want to use and click on the Activate button.

    To uninstall the other you can click on the button delete on them and they will be uninstalled immediately.

    Tobbi-

  • Satellite A200 - 196 how can I restore the Partition from Toshiba hard drive?

    I need to restore my hard drive to factory default.

    I tried now pressed the 'Zéro' key at startup, also tried one at a time, hold down F2 and F8, F10, F12, but none of them put me in the Recovery Wizard.

    I searched the help files on the PC and online but nothing helped.
    Someone at - it an idea how I can get into the recovery partition it please?

    Hello

    You should be able to start the installation of HARD drive recovery as described in http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

    Please note: this will not work if your laptop works with the factory settings. If you have used clean OS installation HDD recovery no longer unavailable. For the installation of factory settings, you must use disk recovery DVDs.

    Everything must be described in the document s user manuals.

  • How can I restore the dialog box warning for the opening of a secure site?

    I want to restore the warning box that tells me when I'm entering a secure site. Who warns when I leave a secure site works very well. I have probably not checked the field at one time or another, but I can't find how to bring it back.

    Seems that the warning for these parameters dialog box has moved from tools > Options > Security

    You can reset the related preferences security.warn_ on the topic: config page.

  • I downloaded service pack 3 and it changed and took some of my programs.how can fully restore the initial configuration and start over?

    I downloaded service pack 3 and it changed my programs taking some. How can I reset and delete and go back to factory settings and start over?

    Hi Daddyguy,

    Please read this article which gives detailed instructions on how to restore Windows XP to a previous state. http://support.Microsoft.com/kb/306084

    I hope this helps. Just reply to the results.

  • How can I restore the desktop icon in the Quick Launch toolbar.

    I use Windows XP Home Edition with service pack 3.  A while ago, after an update my desktop icon disappeared from my toolbar quick launch on the left side of the screen and has been replaced with the toolbar of office on the right side of the screen, which has not the same function, unless you right-click and then click 'show desktop '.  I want to restore the desktop icon in the tool bar quick launch normal but could not find a way to do it - can anyone help please

    Hello cloverb


    Try the fix here

  • How can I get the function of hibernation in the menu with; Log, the user swith, sleep, stop.

    I used to have the function of hibernation on my laptop as pets when I could also log, user swith, sleep, stop.

    But the hard disk had to be changed, and now the hibernation has disappeared from the list, how can I get that back.

    I was told it could be done in the start menu or the customization options, but have not found anywhere.

    Hibernation turned out to be more useful.

    Try this tutorial: enable or disable Hibernation
    http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    Also, please read two method on disk cleanup deletes Hinbernation option in the list.

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • How can I disable the function of unique keys; FN?

    I have a new compaq presario CQ56 laptop with Win 7, and the volume control function keys, reading, etc. when they are pushed to him only (without the need to push the Fn key at the same time).  The problem is that I use these keys only to other purposes more how to adjust the volume, etc.  For example, in MS Publisher, I Zoom in and out to 100% by pressing F9.  However, as it is now I have to press Fn and F9 for this.

    How can I change this back to the 'old' where you need Fn most key to do all what indicates the icon on the function key?  As the volume, check the battery, brightness, etc.

    I searched on help for Win 7 without success.

    Hello Janet,.

    I don't think its possible. However, you can ask HP if they can help you the same configuration in a specific way that is adapted to your condition.

  • How can I reduce the function 'FORWARD' when I send an e-mail to a version full screen the smaller original box?

    I use Windows Live Mail and initially when I used the 'BEFORE the MESSAGE' function during the transmission of an e-mail message a little box came and I inserted that I wanted to post to and comments and press the Send button.

    Recently I have dome something to change this, because now when I click the icon 'To FOLLOW the MESSAGE' box takes up the entire screen. How can I get that back to the smallest box.

    Thank you

    Click next and before you do anything else, close all other windows, including the main screen of WLMail and all the open windows in the taskbar.
     
    Drag the window to the size you want, and then close. Windows should remember the size of a window resized as long as it's the last closed.
     

Maybe you are looking for

  • I tried for several days to install watchos3 without success.

    I have an Iphone 6 more ios10 running and a 42 mm apple watchos2 sport watch running (2.2.2). I tried for several days to install watchos3 without success. I have so far: Restarted my iphone and restarted my Apple Watch and tried again Removed the do

  • deleted mail box it be found

    I accidentally put my e-mail address in the box in the! rules! who removed all can I retrieve deleted messages

  • Conversion: engineering of fractional chain chain

    Hello everyone I am loading a text file with multiple columns that has text (file and the column title information) and values to engineering format. Once I loaded this file I use 'chain of worksheet to the table' to convert it to table 2D channels.

  • problem usb 16gig

    So my 16 gig Cruzer thumb drive out of nowhere Glide seems to have issues. I have it plugged into my computer and it shows in my devices but I have no option to display its content, add or format it somehow. I tried to uninstall and reinstall, no luc

  • How to delete files in need of approval should be deleted? error message: you need permission to perform this action

    Original title: How do I delete the file requiring approval should be deleted? I have download a web reader Cacaoweb & recently just found out it doesn't work anymore. One day the internet browser has become impossible to connect to the server. I tri