How can I retainmy data?

Similar Questions

• How can you save data of the iCloud on an external hard drive?

  How can I record data of the iCloud on an external hard drive?

  Is not possible. iCloud requires a Wi - Fi connection to synchronize data. Cannot do it on an external drive.

• How can I enter data apple fitness?  I swim and take aerobics classes.  I don't wear my Apple Watch during this operation.

  How can I enter data of fitness on my Apple Watch?  I swim and take water aerobics classes and not wear my watch in the water.

  Hello

  It is not currently possible to enter data of fitness on Apple Watch.

  Health and fitness data Apple Watch, iPhone and any other source are rather grouped by health on your iPhone app. Combined data is reflected in the health app charts (which can be added to the dashboard), which adjust the results to avoid any double counting of data from different sources.

  To add a workout that has not been registered by your watch, iPhone, or other existing data source:

  -On your iPhone, in the application of health (icon: red heart on a white background), go to: data on health (tab) > Fitness > training > add a data Point > enter the result of your workout.

  Activity types available when you add a workout currently including swimming, but do not include aerobics (other can be used instead).

• How can I download data from key USB flash to a Windows 7 computer

  I need to transfer some files from my PC to my PC Windows 7 Windows XP using a USB flash key. I've used Windows Easy Transfer to move my files without problem and some programs but did not download some files. I downloaded these files on a USB flash and I can access the files, as long as the stick is pluged. How can I download data from the USB flash on my Windows 7 computer

  Hello

  The following video may help:

  http://www.YouTube.com/watch?v=hrMQh0Xkpvs

  or this article:

  http://www.swarthmore.edu/documents/administration/its/how%20To%20Use%20A%20USB%20Flash%20Drive.PDF

  and here:

  http://TECHTIPS.salon.com/use-USB-flash-drive-transfer-files-PC-Mac-2544.html

  (Mac here can be a PC).

  Good luck.

• How can I save data in text format

  How can I save data in text format in labwindows cvi

  Hello

  If your data is in a table, the easiest is to use the ArrayToFile function.

  Automatically, it creates a file and puts your data in it depending on the size you provide.

  If you have individual samples you need to write from time to time, you can either collect them in a table and then use ArrayToFile or open a file with fopen and write them as they are acquired with fwrite.

  Hope this helps,

• How can I read data from my SQLite database?

  I am new to Adobe Air and am playing with creating something simple to insert data into a database and then display it. I was able to insert data successfully but now encounter difficulties to read from the database and display. How can I display data such as a text box or text box?

  This my code for insertion:

  private void sqlConn(dbName___tring,_dbstmt___tring,_dbInsert___tring):void
  {
  sqlC varQLConnection = new SqlConnection ();
  SQLs varQLStatement = new SQLStatement();
  SQLI varQLStatement = new SQLStatement();

  file: var folder = File.applicationDirectory;
  var dbPath:File = folder.resolvePath (dbName);

  sqlc.addEventListener (SQLEvent.OPEN, dbCreated);
  sqlc.addEventListener (SQLErrorEvent.ERROR, dbError);

  sqls.addEventListener (SQLEvent.RESULT, tbCreated);
  sqls.addEventListener (SQLErrorEvent.ERROR, tbError);

  sqli.addEventListener (SQLEvent.RESULT, recCreated);
  sqli.addEventListener (SQLErrorEvent.ERROR, recError);

  sqlc.openAsync (dbPath);

  sqls.sqlConnection = sqlc;
  SQLs. Text = dbstmt;
  SQLs. Execute();

  sqli.sqlConnection = sqlc;
  SQLI. Text = dbInsert;
  SQLI. Execute();
  }

  private void btn_Click (): void
  {
  dbName var= "test.db" tring
  var sqlStatmttring = "CREATE TABLE If NOT EXISTS test_table (id INTEGER PRIMARY KEY AUTOINCREMENT, first_name TEXT, last_name TEXT);
  var sqlInserttring = 'INSERT test_table (first_name, last_name) VALUES('"+txtTaskName.text+"','"+txtTaskDescription.text+"');';
  var sqlReadtring = "SELECT * FROM test_table;"

  sqlConn (dbName, sqlStatmt, sqlInsert);
  }

  That's what I have so far to read the articles. Is this right? How can I use it to display items on one of my opinions?

  private void readItems(dbName___tring):void
  {
  var sqlrQLStatement = new SQLStatement();
  sqlC varQLConnection = new SqlConnection ();
  file: var folder = File.applicationDirectory;
  var dbPath:File = folder.resolvePath (dbName);

  sqlc.openAsync (dbPath);

  sqlr.addEventListener (SQLEvent.RESULT, recFound);
  sqlr.addEventListener (SQLErrorEvent.ERROR, recFoundError);

  sqlr.sqlConnection = sqlc;
  sqlr. Text = "SELECT * FROM test_table ';
  sqlr. Execute();

  Table of results: var = sqlr.getResult () .data;
  }

  Thank you

  They must be in their own class and each class must be in their own folder. If you need a taskClass.as file and a SQLClass in the SQLClass.as file that has the recFound function.

• How can I add data file to an existing table on Oracle RAC ASM with no OMF? Thank you!

  How can I add data file to an existing table on Oracle RAC ASM with no OMF? Thank you!

  Hello

  So I guess you have some files in ASM, see your first existing file structure

  Select file_name

  from dba_data_files;

  and to add to an existing table, the example below (even if you're better sticking with OMFs!)-is that what you are looking for?

  SQL > create tablespace TEST1

  2 datafile '+ DATA' size 1 M;

  Created tablespace.

  SQL > select file_name in dba_data_files;

  FILE_NAME

  --------------------------------------------------------------------------------

  +Data/orcl2/datafile/users.259.859820983

  +Data/orcl2/datafile/undotbs1.258.859820983

  +Data/orcl2/datafile/SYSAUX.257.859820983

  +Data/orcl2/datafile/system.256.859820981

  +Data/orcl2/datafile/example.269.859821049

  +Data/orcl2/datafile/Test1.271.859843053

  6 selected lines.

  SQL > alter tablespace TEST1

  2 Add datafile ' + DATA / mynewfile01.dbf ' size 2 m;

  Tablespace altered.

  SQL > select file_name in dba_data_files;

  FILE_NAME

  --------------------------------------------------------------------------------

  +Data/orcl2/datafile/users.259.859820983

  +Data/orcl2/datafile/undotbs1.258.859820983

  +Data/orcl2/datafile/SYSAUX.257.859820983

  +Data/orcl2/datafile/system.256.859820981

  +Data/orcl2/datafile/example.269.859821049

  +Data/orcl2/datafile/Test1.271.859843053

  + DATA / mynewfile01.dbf

  Thank you

• How can I get data from each associated XMLnode in movieclips separated when you click a line in the combobox

  How can I get data from each associated XMLnode in movieclips separated when you click a line in the combobox?

  A sample of XML is like this:

  <>planter

  < Lauvtre >

  < Botanisk_navn > Acer campestre < / Botanisk_navn >

  < Norsk_navn > Naverlonn < / Norsk_navn >

  Gronn < Farge > < / fan >

  H4 < Herdighet > < / Herdighet >

  < Hoyde > 10-15 m < / Hoyde >

  < / Lauvtre >

  I have a combobox where it shows the botanical name and the Norwegian name. But the rest of the info in movieclips seem separate.

  Someone has an idea how to do this? Can I use the trace function maybe? Here is my AS3 code so far:

  var loader: URLLoader = new URLLoader();

  loader.addEventListener (Event.COMPLETE, onLoaded);

  list.addEventListener (Event.CHANGE, itemChange);

  function itemChange(e:Event):void

  {

  your. Text = list.selectedItem.data;

  TB. Text = list.selectedItem.label;

  }

  var xml;

  function onLoaded(e:Event):void

  {

  XML = new XML (e.target.data);

  var it: XMLList = xml. Planter.Lauvtre;

  for (var i: uint = 0; i < il.length (); i ++)

  {

  list.addItem ({data: it.}) Farge.Text ([i]) + "\n"+ it.» Herdighet.Text ([i]) + "\n" + it. Hoyde.text ([i]),

  label: it. Botanisk_navn. Text() [i] + "\n"+ it.» Norsk_navn. Text() [i]});

  }

  }

  Loader.Load (new URLRequest ("lauvtre.xml"));

  Thank you!

  Rheus.

  I don't know what you're trying to do.  but, if you want to fill one combobox with the botanical names and when one is chosen, the other use of logins:

  var loader: URLLoader = new URLLoader();

  loader.addEventListener (Event.COMPLETE, onLoaded);

  list.addEventListener (Event.CHANGE, itemChange);

  function itemChange(e:Event):void {}

  var selectedObj:Object = a [list.selectedIndex]

  trace (selectedObj ['fan'], selectedObj ['Botanisk'], etc);

  }

  var xml;

  var a: Array = [];

  function onLoaded(e:Event):void {}

  XML = new XML (e.target.data);

  var it: XMLList = xml. Lauvtre;

  for (var i: uint = 0; i

  list.addItem({label:il[i].child('Botanisk_navn').toString()});)

  a [i] = {'Fan': it [i].child('Farge').toString (), 'Herdighet': it [i].child('Herdighet').toString (), "Hoyde": he [i].child('Hoyde').toString (), 'Botanisk':il[i].child('Botanisk_navn').toString(),'Norsk_navn':il[i].child('Norsk_navn').toString()};}

  }

  }

  Loader.Load (new URLRequest ("test.xml"));

• How can I delete data &amp; documents

  I have an iPhone 5 and it comes loaded to the top with Gigibits 53 data & Documents. How can I remove this?

  http://www.igeeksblog.com/documents-and-data-iPhone/

• How can I pass data between DIAdem and LabVIEW?

  Hello community,

  in fact I use a LabVIEW application to control a test system, collect data and store it in a file.

  DIAdem is executed (using ITOCommand) and then create a report (PDF).

  This works already.

  But also, I would like to receive a return value of tiara, a real number, as for example the register R1.

  No idea how can be achieved?

  Thank you!

  Espelkamper

  Declare records, variables in the script of tiara that store the calculated result. Read records in labview

• How can I get data (txt file with data from the 5 sensors) in a graph?

  I have a txt file that reads

  time, data1, data2, data3, data4, recentes5, yes/no

  example:

  0,450,427,421,480,622,0
  4,561,513,478,466,540,0
  8,547,531,510,492,515,0
  12,528,524,513,495,525,1
  36,531,524,515,505,534,1
  65,537,528,519,511,539,1
  

  Where the last song realates to a buzzer

  I need a chart that shows all 5 data point (so a graph with 5 lines)

  How can I do this?

  Also, is there a way to show the Yes/No part in LanView?

  Here it is:

  

  It's very simple.

  1. open the text file in a spreadsheet file.  You can connect a control of path or if left blank, it will prompt for a path.

  2. set the comma as separator.

  3. display the values on the graph.

  I just added a digital table indicator so that you can see the values as exactly those of the file.

  

  To learn more about LabVIEW, I suggest that you try to watch some of these tutorials.

• How can I recover data from a disk that has been done under windows xp with the new computer that is running windows 7?

  My drive has been created using a windows xp windows live care and my new computer works with windows 7. How can I get information on the new computer. When I tried to download the software of microsoft it would allow me to do. Any ideas?

  Hi Dorene33,

  ·         What exactly happens when you try to download the software?

  ·         You receive an error message?

  ·         You are able to access drive from devices and printers?

  ·         What happens exactly when you double click on the drive and try to open it?

  I suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malware

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Hope this information helps.

• How can I return data in dataProvider of entering text in listRenderer?

  Hi people,

  I would like to set up a list that I can add/remove data from. I used a custom listRenederer to set up a list with 3 text entries in each line and fill in the data:

  package
  {
      import flash.events.Event;
      import flash.events.MouseEvent;
  
      import qnx.ui.listClasses.AlternatingCellRenderer;
      import qnx.ui.listClasses.CellRenderer;
      import qnx.ui.text.KeyboardType;
      import qnx.ui.text.TextInput;
      import qnx.ui.text.TextInputIconMode;
  
      public class ColumnCellRendere extends AlternatingCellRenderer
      {
          private var column1:TextInput;
          private var column2:TextInput;
          private var column3:TextInput;
  
          public function ColumnCellRendere()
          {
              super();
          }
  
          override protected function init():void
          {
              column1 = new TextInput();
              column1.restrict = "0-9";
              column1.keyboardType = KeyboardType.PHONE;
              column1.clearIconMode = TextInputIconMode.NEVER;
              column1.width = 50;
              addChild(column1);
  
              column2 = new TextInput();
              column2.restrict = "0-9";
              column2.keyboardType = KeyboardType.PHONE;
              column2.clearIconMode = TextInputIconMode.NEVER;
              column2.width = 50;
              column2.x = 60;
              addChild(column2);
  
              column3 = new TextInput();
              column3.restrict = "0-9";
              column3.keyboardType = KeyboardType.PHONE;
              column3.clearIconMode = TextInputIconMode.NEVER;
              column3.width = 50;
              column3.x = 120;
              addChild(column3);
  
              column1.addEventListener(MouseEvent.CLICK, onClick);
              column1.addEventListener(MouseEvent.MOUSE_DOWN, onMouseDown);
  
              super.init();
          }
  
          private function onClick (e:MouseEvent):void
          {
              dispatchEvent(new Event(Event.SELECT, true, true));
          }
  
          private function onMouseDown (e:MouseEvent):void
          {
              e.stopImmediatePropagation();
          }
  
          override public function set data(data:Object):void
          {
              super.data = data;
  
              column1.text = data.col1;
              column2.text = data.col2;
              column3.text = data.col3;
          }
  
      }
  }
  

  I can happily fill the list, but when I want to change the values, I can't have the data to account for the data provider. Similarly, if I add a new line to the list, I end up with empty values in table dataProviders and cannot work out how to get the new data into it. Any help appreciated.

  In your 'data' function, maintain a reference to it:

  private var _data: Object;

  So, in theory, when the data changes, you can

  This._data.Col1 = this.column1.text; or what ever.

  Will need this code to ensure that it can do what you want.

• How can I transfer data from a dead laptop

  I have a laptop medion dead that took Vista. How can I access the data and transfer it on an Asus running windows 7 64 bit

  If the Medion no will power, you can test the drive with the disk manufacturer utility.

  If the Medion does not supply power to the top, the only way is to remove the disc, put it in an envelope and see if it works.

  If it's an old record, you will probably need a powered external envelope. Older readers need too to work a single USB connection.

• How can we engage data updated in a PivotTable.

  Hi Experts ADF,

  JDEV Version 11.1.1.7.0

  I have an entity based in VO. And I drag the VO as a PivotTable in a page.

  (a) the cells must be modifiable.

  (b) on the button click Validate all values in the PivotTable will be engaged in the database and the user will be able to see the updated PivotTable.

  As I said I use Jdev 11.1.1.7.0 version, whenever I am to edit a cell and move to another cell. The previous cell changes again the old value.

  Now how can I update and validate the new values in a PivotTable.

  Now tried the links below but without success.

  PivotTable

  http://jdevadf.Oracle.com/ADF-richclient-demo/faces/feature/PivotTable/pivotTableActiveCellStamping.JSPX

  Is it possible to update the data in a PivotTable or its not supported.

  Thanks in advance,

  Animesh

  Hello Dario,

  This isn't a bug, ADF not bindings support the direct of data cell in the pivot table dynamic update. We update the data programmatically.

  Animesh

  I created the PivotTable based on the employees as shown below table

  

  JSPX code:

  value = "#{bindings." Employees2.pivotTableModel}.

  inlineStyle = "width: 905px;" var = "cellData.

  varStatus = "cellStatus".

  Binding = "#{backingBeanScope.test.PivotTable} '"

  contentDelivery = "immediate" >

  readOnly = "#{eq 17000 cellData.dataValue? true: false}" "

  valueChangeListener = "#{backingBeanScope.Test.salValChange} '"

  autoSubmit = "true" id = "it1.

  partialTriggers = "it1" / >

  actionListener="#{bindings.Commit.execute}"/ >

  Java code:

  {} public void salValChange (ValueChangeEvent valueChangeEvent)

  Add the code in the event here...

  Pv = UIPivotTable

  (UIPivotTable) valueChangeEvent.getComponent () .getParent () .getParent (); retrieve the PivotTable by inputText

  DataModel dm = pv.getDataModel ();

  CK DataCellKey = (DataCellKey) dm.getCellKey ();

  Vector eixoX =

  ck.getColumnKey () .getMembers (); Position 0 = describe the X axis, ex: AGE, Position 1 second describe axis X ex: 5 years old

  Vector eixoY =

  ck.getRowKey () .getMembers (); Position 0 = describe axis, ex: SIZE, Position 1 second = describe axis, ex: HEIGHT ALL

  Iterator it = eixoX.iterator ();

  String valueInputado =

  valueChangeEvent.getNewValue (m:System.NET.SocketAddress.ToString ()); value entered by the user

  String Colonneselectionner = ((QDRMember) eixoX.get (0)) () .getData m:System.NET.SocketAddress.ToString ();

  String deptid = ((QDRMember) eixoY.get (0)) () .getData m:System.NET.SocketAddress.ToString ();

  Dim empid = ((QDRMember) eixoY.get (1)) () .getData m:System.NET.SocketAddress.ToString ();

  System.out.println ("Colonneselectionner" + Colonneselectionner + "rowSelect" +)

  deptID + ' * ' + empid);

  Key k = new key (new Object() {empid});

  BindingContainer links =.

  BindingContext.getCurrent () .getCurrentBindingsEntry ();

  DcIteratorBinding = DCIteratorBinding

  (DCIteratorBinding) bindings.get ("Employees2Iterator");

  ViewObjectImpl vo = (ViewObjectImpl) dcIteratorBinding.getViewObject ();

  Line r = vo.getRow (k);

  try {}

  r.setAttribute ("salary", new oracle.jbo.domain.Number (valueInputado));

  } catch (SQLException e) {}

  }

  vo.executeQuery ();

  AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance ();

  adfFacesContext.addPartialTarget (pivotTable);

  }

  On the value of the seizure of salary changes listener, I use the above given code and finally I use the button confirm to update in DB.

  It works for me

  Thank you

  Nitesh