How can I return my last OS (Vista) on my laptop
I have ot a new CD with Windows 7 and I hate it I want to go back to Windows Vista
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
Have you wiped/damaged it during the installation of Windows 7.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
You can also make recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are in service again.
They will tell you how to do this.
Every computer manufacturer has their way of doing recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.
There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
Save all data, because it will be lost during a clean installation.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Lost normal Explorer... says failed... can only get the shortcut... How can I return... thanx
You don't say what Explorer!
There are Explorer Windows and Internet Explorer.Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
See you soon.
Mick Murphy - Microsoft partner
-
I use the beta version, how can I return to the basis of Firefox?
How can I return to the basis of Firefox instead of the beta?
Backup of your profile and you will not lose your add-ons and bookmarks.
-
How can I change my last name?
How can I change my last name from my apple ID and also for my user account on my laptop (Administrator).
You can change the associated name to your identifier Apple by logging in to https://appleid.apple.com/ and then click on edit counts to the right of the section.
-
How can I return Ipad lost the Original owner
How can I return Ipad lost to the Original owner. I found this in a restaurant and he didn't. is it possible to give that ipad
Of course, follow this:
Report a lost or stolen - Apple Support Apple product
Please send back
EDIT: of course, you can leave in the police station the nearest and the report as lost, place, time, etc. or to personnel in the site you found.
-
How can I return to 4.0 3.6 I've never had a problem with 3.6 and now 4.0 crashes all the time tell me how to go back
Downgrade to Firefox 3.6 first of all uninstall Firefox 4, but do not select the option 'remove my Firefox personal data '. If you select this option, it will delete your bookmarks, passwords and other user data.
Then you can install the latest version of Firefox 3.6 available to http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your favorite courses, passwords etc.
I recommend, to avoid possible problems with decommissioning, accessing your profile folder and delete the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Delete these files will force Firefox to rebuild the list of installed extensions, check their compatibility and cancel the toolbar customizations.
For more information on how to find your profile folder, see https://support.mozilla.com/kb/Profiles
-
How can I stop the last post showing when I want to send this person a new Imessage. I don't want an old conversation appears constantly when I am a Messenger contact. I have an Iphone 5s
I don't know, but let me see if I understand what you're asking. You do not want to see the thread you have with a particular contact when you go to send them another message? The only way to do this is to remove the previous message thread. If you send a message to someone that you already have a thread of conversation with, it will continue to post in this thread. There is no such thing as having multiple threads with the same person. All conversations with the same person would remain in the same thread, unless you remove the previous discussions. If you delete your previous conversation, when you go to start a new conversation, he won't have any of the other answers.
-
After a recent update the keyboard appears in the center of the screen, rather than at the end. How can I return it down?
Press and hold the keypad icon bit, then slide your finger up to 'Dock '.
-
my audio syestem of beats went when I choose windows 8, how can I return it with the full version? I have hp pavilion dv4 5110tx
Hello
Try the following.
Download IDT Audio Installer on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59882.exe
One time finished, open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
Then, download and reinstall the Chipset driver on the following link.
After reinstalling, restart the laptop and let Windows load completely. Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation. When this has completed, restart the computer again before checking if the Beats Audio is now listed in the windows control panel.
Kind regards
DP - K
-
How can I return the path of a test step VI in LabVIEW?
I would create a VI that will return all of the VI paths that are associated with the test steps in a TestStand sequence. How can I return the path of the VI associated with a test step? Here is a starting point that will return the first step of the sequence.
You must convert the Module to a LabVIEWModule (use the variant to the data node), then you can use LabVIEWModule.VIPath. If you use TestStand 2010, you can call LabVIEWModule.GetVIAbsolutePath to find the VI in the case you are calling with a project.
-
How can I return my computer dell laptop to factory settings
How can I return my lap top to factory settings
-
How can I return the audio for my lap top.
Original title: audio sound
I inadvertently deleted something that gives me sound on my lap top. I think it is silverlight. How can I return the audio for my lap top. THX
Hello
1 have had any changes made on the computer before the show?
2. what operating system is installed on the computer?
3. when exactly do you face the question?
I suggest to return the item and try to run the fix it:
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Please provide more information to help you best.
-
How can I return my T5i factory settings?
How can I return my T5i factory settings? I have problems with flash and counting and thinking, I may have inadvertently changed a setting. Appreciate any help. Thank you
Yes
-
I pressed a button on the accident and he took off to be a Director. Now, I am not recognised and cannot do things on my computer. How can I return my administrator status?
Log in as the built-in Administrator and change yourself (or leave you the user account and only use the administrator account if necessary.)
-
How can I reinstall Solitaire in Windows Vista?
I deleted my computer solitaire awhile back. Now, I want to come back. How can I download or reinstall of Vista Home Premium 32 - bit OS Solitaire?
I just tried the following method: Control Panel, programs, turn Windows features on / off (disabled Solitaire and then selected solitaire), restarted. My program folder files poster now a solitaire.exe file, but it is not run/open.Suggestions?Hello
You can follow these steps below to activate the Windows feature set and check if it works.
(a) click Start
(b) click on Control Panel
(c) click on programs
(d) under programs and features, select Windows features on or off
(e) check the box games
(f) press OK
For reference:
Maybe you are looking for
-
How to find and recover jailbroken iPhone?
I've heard of spyware Pegasus on iOS and updated my iPhone 9.3.5 6 more for the last iOS and run theapplication lookout. I was shocked to find my iPhone, while not infected by Pegasus, was detected was jailbroken without my knowledge. Is it possible
-
Satellite A30: 80 GB HDD is recognized as 40 GB
My Satellite A30 2.5 G Cel. 1 GB mem recognizes a 80 GB of a 40 GB HARD disk.The HARD drive I am trying we is a Samsung MP0804H. Someone knows how to set the LBA for this laptop?
-
How to access the Chess Titans
problem with my pc games Hi I have windows 7 ultimate, but there is no titan failures or any other game in my games folder and I also went into program and enable or disable features and there is no option for games.so please help my to turn the tita
-
How to: close the Application properly
Hi all I could not find a recent (LV 2009) thread on this topic. I have an application that consists of two main voluntary initiatives. The first VI (that the user never sees) called the VI of the user interface. I got hurt when the user wants to le
-
I'm having a problem with the windows vista service Pack 1 download and installation.
KB936330 The error Code is 800F081FCode 800F081FWhen I run windows update as it says it's a pack recommended important I need, and then when I try to download and install it won't get this error just keeps popping up. Also, saying: unknown error. If