How can I spend $0.24 credit to change region?

Similar Questions

• How can I recharge my personal credit card, being a member of a family shared account?

  How can I recharge my personal credit card, being a member of a family shared account?

  You cannot, with the family share that only cards of the Organizer will be used (if you have a balance on your account that will be used for your purchases, if that card organizer will be charged)

• How can I use my instore credit for a movie

  How can I use my instore credit for a movie

  Hello R Larson,

  I see that you are wanting to use a store credit for a movie. I'll be happy for you have said in the right direction. First of all, let's see if we can find out if the credit is a credit of iTunes gift card or a credit from the Apple Store. This article will help you determine what may be:

  What kind of card do I? -Apple Support

  If credit is iTunes, you can just check your balance using the instructions found in the section below and use to either rent or buy a movie to display:

  See your credit balance - Apple Support iTunes

  If the store is an Apple Store Gift card credit, you would not be able to use iTunes to watch a movie.

  I hope this helps. See you soon!

• I recently downloaded Windows XP and he tells me is not passed windows genuine. How can I spend without having to buy it again?

  I recently downloaded windows xp and he tells me is not passed windows genuine. How can I spend without having to buy it again?

  It is likely that if you have downloaded XP a purchase, that it's a forgery, because MS has not sold XP Download drink for years.

  As says Carey - we need to check it out...

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• Hello. The card I had used to pay for my CC was hacked, then cancelled by my Bank. How can I reset my new credit card number? Thank you.

  Hello. The card I had used to pay for my CC was hacked, then cancelled by my Bank. How can I reset my new credit card number? Thank you.

  A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help

  -Credit card https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-cr creative - cloud.html

  You may also contact Adobe Monday

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I get charged $74.95 per month for the creative cloud. I am trying to cancel it, but according to my adobe account info, I'm not on a plan. How is what happens? And how can I stop Adobe to credit my credit card each month?

  I get charged $74.95 per month for the creative cloud. I am trying to cancel it, but according to my adobe account info, I'm not on a plan. How is what happens? And how can I stop Adobe to credit my credit card each month?

  Kindly Contact customer you can also try: phone support | Orders, returns of trade.

  Let us know if you need assistance with this.

  Atul_Saini

• How can I IMAQ KING to show only the region of interest?

  Hello

  I cannot acquire data of only my region of interest using IMAQ KING. When I try to select a region of interest (i.e. - a region of 10 x 5 pixels) and to display only in this region, a result of the size of the correct image, but with all the black pixels.  My code is attached.  I believe that the error comes from the extracted IMAQ Tetragon VI.  Since I'm not inputing options for VI, the default fill value is 0 (black). How can I modify my code to select a region and view the image of this region?  Any help is appreciated. Thank you.

  Your problem is probably with the function type cast.  The image data seem to be 16-bit.  The type cast function is not resize these data, it just clipped the high byte.  Since you're using the same reference to the image in two places, the image now refers to an 8-bit image (since that's what you type is casted to) to the time you get to the loop so the upper byte is lost.

• How can I stop my home page to change it on windows7

  Original title: everyone

  How can I stop my home page to change it on windows7

  Follow the steps here. If it is not listed in the Control Panel, or you are unable to remove it, go to step 2 and continue with the rest steps. HitmanPro may not be necessary.
   

• I have 6 buttons on the navigation bar that point to 6 different pages - the buttons are all the same color - if I am currently on [say] page 3-How can I me key menu 3 to change color and state that I am on page 3?

  I have 6 buttons on the navigation bar that point to 6 different pages - the buttons are all the same color - if I am currently on [say] page 3-How can I me key menu 3 to change color and state that I am on page 3?   using DreamWeaver CC

  Among the contributors here has a nice page explaining how to do what you want, using css.

  Indicator of persisting in the Menus - Page http://alt-web.com/

• How can I add a custom coding to change the appearance of the "add to cart" and "view cart" paypal

  How can I add a custom coding to change the appearance of the "add to cart" and "view cart" paypal?  I can do these buttons on muse, or should I make them on Illustrator?

  Hello

  Here is some info:

  PayPal API developer - product page of Button Manager - classic

• How can I save iTunes before a hardware change?

  I bought a new computer and am transfer all my data to a new hard drive running Windows 10 pro.  Although a lot of my songs are contained in subdirectories of iTunes, I have a subdirectory that contains hundreds of individual MP3s that were migrated in iTunes, one at a time. How can I make sure that after you have installed iTunes on the new drive and transfer all the mp3, it will appear in iTunes [with their album covers, which were often imported after a search in Google images]?

  Migrate a library iTunes from one computer to another

  These are two approaches that work normally to move an existing library to a new computer.

  Method 1

  1. Save the library with this trick of the user.
  2. Remove the old computer if you no longer wish to access content protected on it.
  3. Restore the backup to your new computer by using the same tool used to back it up.
  4. Keep your current backup in the future.

  Method 2

  Connect the two computers on the same network. Share your old computer < user music > folder and copy the folder of library fulliTunes in the < user music > on the new folder. Yet once, remove the old computer so is no longer necessary.

  These two methods should give the new computer, a clone of the library work which was on the former. What about iTunes is it is still the 'home' for your devices library you should not have problems with iTunes will erase and reload.

  I recommend method 1 because it establishes a current backup for your library.

  Note If you have iOS devices and that you have not reached your contacts and calendar all in all items, then you need to create a dummy entry in your new profile and iTunes expected to merge existing data from the device.

  If your media folder has been separated in the main folder of iTunes, you may need to do some preparatory work to make it easier to move. See make a library of portable split.

  If you are in the unfortunate position where you're able to access your original library or a backup and then seerecover your iTunes from your iPod or an iOS device to get tips on how to configure your devices with a new library with the maximum preservation of data.

  TT2

• Account Hotmail has been hacked. How can I access him that hackers have changed my password.

  I had my hacked hotmail account and send a message to all my contacts I have been robbed under threat in Madrid and are in urgent need of money.  I can't access the account because hackers changed the password.  Not only can I not access all the information stored in the account, but it arouses real concerns for my friends who did not realize that it is a scam.  The Hotmail Web site is the best thing to useless because it's just sent me round in a circle without giving me answers about how to access the old account, (I had to put in place a new).  Is there anyone who can help me with this you problem?  On Hotmail forum site, it seems that there are many people suffer from the same problem and not able to get answers.

  Hello

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

  Forums

  E-mail client and the appliance issues

  Hotmail Sign In questions

  Lost or deleted emails

  People and Contacts

  Reading, writing, and formatting mail

  Sending and receiving mail

  Sign in, and sign to the top and account security

  Using the Hotmail calendar

  Using Web Messenger

   

   

  Consult with Microsoft Certified Solutions

  How to work the views Active Hotmail?

  Your account has been temporarily blocked

  What to do if you can't connect to Windows Live Hotmail

  Compromised account - unauthorized account access

  Reset your Windows Live ID password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Change your Windows Live ID password

   

  ____________________________________________

   

   

  For the different Forums for Windows Live Applications, select the link below

   

  Welcome to Windows Live Solution Center

  http://windowslivehelp.com/

• Password accepted but does nothing (admin) user. Locked user account? How can I register as a Admin to change?

  Had problems with Solution Explorer. While changing this and that, I blocked the user accounts. My password is not rejected, but does nothing. How can I get as long as a tool fix my problem?

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  [Note: do not enter the brackets!]

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Remove the installation/rescue DVD and restart the computer. Now, you will be able to log on to the built-in Administrator compatible account now and make your changes. Once you have fixed things, connect to your additional administrative account (implemented by the recommendations below) and disable the administrator built-in again for security reasons.

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
  MS - MVP - Elephant Boy computers - don't panic!

• How can I stop the touch pad to change the print size

  When I type on my laptop, using windows 7, and I brush against the touchpad, change the size of the print. How can I stop this?

  Hello

  1. with what application are you having this problem?

  2. organize the CTRL key pressed while what is happening?

  Check if CTRL is pressed in the on-screen keyboard:

  a. click Start and type osk in the search bar and click on enter key.

  b. If the CTRL key is highlighted, then click on the CTRL key .

  c. check if the print size is reduced;

• How can I get beyond the boundary of the region?

  original title: region

  I've reached the limit of region changes on my labtop, how can I get more

  Hello

  It is by design.

  DVD region information
  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  DVD region code
  http://en.Wikipedia.org/wiki/DVD_region_code

  You can buy devices that claim to be region free and software that claims to be able to
  other regions to read even if I have no experience with those.

  Region Free DVD Player Information
  http://www.dvdbuyingguide.com/codefreedvd/Codefree-FAQ.html

  Region Free & Code free DVD player information
  http://www.dvdbuyingguide.com/codefreedvd/bigfaq.html

  Forums - a lot of expert real help
  http://Club.myce.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">