How can I stop the blue screen error caused by sffp_sd.sys

Since the middle of the latest version of windows aprils has updated that I regularly get the blue screen... The last was 26/05/12 16:30...

DRIVER_IRQL_NOT_LESS_OR_EQUAL

STOP: 0X000000D1 (0X00000002, 0X00000000, 0X00000008, 0X914E8774)

BTHUSB Device bthport.sys - 914E8774 address, base at 914E5000, Datestamp 4db03738

Hello

BTHUSB Device bthport.sys and sffp_sd.sys are the two components of Windows that means something else led him into
Fault. First thing I would do is update the BlueTooth drivers. Check with the system manufacturer (mother's support-
the Board Maker for systems (custom), their documentation online and drivers and ask in their forums (if any)
known issues and/or / the real peripheral manufacturer support site. (See driver update methods in the next
message.)

===============================================================================

Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.

ZIP or download the content of the C:\Windows\minidump

Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

==================================================================

BCCode: D1 0x000000D1

Think video drivers especially if it may be others. Refer to the section of driver in my credits
methods of troubleshooting blue screen below. BIOS, chipset of low level drivers and
antispyway/antivirus/security programs can also cause this. Check the resolution of the problems and
When you arrive at the driver and tests of memory sections do reference to generic methods in following
message and then back to the if necessary troubleshooting tool.

BCCode: D1 0x000000D1

Cause

A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

This bug check is usually caused by drivers who used a wrong address.

If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.


BCCode: d1 0x000000d1<-- read="" this="">
* 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

=========================================

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html

-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.

Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html

-------------------------------------------------------------------------

Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free

http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.

You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-------------------------------------------------------------------------

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • How can I stop the "Splash Screen" to appear please.

    Hello
    I have two monitors, model S230HLbd. How can I stop the "Splash Screen" to appear please.

    By Splash Screen, I mean the 'Acer' and 'Energy Star' logos that appear when you turn on the screens. I think they slow down the display of what you want to see.

    There is no way to stop the boot process.

  • How can I fix the blue screen that appears after the Welcome screen and also the compaq screen changed after windows update the or to the 03/23/11

    March 23 windows set to date. a failure and then managed. After that, the compaq screen has changed and the blue display lights for a little after the Welcome screen.

    Hello

    If you think the update caused the blue screen then uninstall it to check.

    Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

    Or

    Remove an update
    http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

    Or

    The problems with the removal of updates
    http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
    Or

    How to uninstall updates in Windows Vista
    http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

    Disable or hide optional updates on Windows Vista
    http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

    ==============================================================

    If not, remove the updates help then we can troubleshoot the BlueScreens.

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    Check out these utilities to see if information may be collected:

    It is an excellent tool for displaying the blue screen error information

    -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    and displays information about all accidents of a table.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    -------------

    MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
    time of the BSOD to provide more information about the possible cause - see TIP.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it for a bit before and after the time of the BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------

    AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
    application goes down has occurred in your system. The information breaks down is extracted from the .wer
    the files created by the Windows Error Reporting (WER) of the operating system component of each
    time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
    text/html/csv/xml file.
    http://www.NirSoft.NET/utils/app_crash_view.html

    I hope this helps.

  • How can I stop this blue screen? BCCode: fe

    I've been getting this blue screen, what can I do about it? I think it has something to do with the possible usb drives I have d/l anything to solve the problem? Help, please. Thank you

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: fe
    BCP1: 00000008
    BCP2: 00000006
    BCP3: 00000005
    BCP4: 86DB15E0
    OS version: 6_0_6001
    Service Pack: 1_0
    Product: 768_1

    Files helping to describe the problem:
    C:\WINDOWS\Minidump\Mini040511-01.dmp
    C:\Users\RIFFCSG\AppData\Local\Temp\WER-43602-0.SysData.XML
    C:\Users\RIFFCSG\AppData\Local\Temp\WERC8BA.tmp.version.txt

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Hi rancidbulletbullet,
     
    Value of 0x000000FE BUGCODE_USB_DRIVER bug control a. This indicates that an error occurred in a bus universal series (USB) driver.
     
    For more information, see:
     
     
    Apply the hotfix provided in the link below and check if it helps you fix the problem:
     
  • How can I stop the on screen keyboard to appear even after I tried to stop it from appearing in the normal way, but still continues to appear?

    To the login page when I first start the computer, I took a glance on the keyboard on the screen and since then I tried to get the keyboard to appear by turning off the coast of the normal way, but he still continues to appear no matter how I try to stop it from appearing.  Can someone help me because I don't want to have to re - install the OS again?  Or is it far from uninstall the keyboard on the screen?

    In the Page of newspaper here an accessibility option. Turn if off from there and see if that helps.

  • How can I fix the blue screen? / Lvl4 file... DISP (missing or corrupted) / I have Window XP SP3

    When I work on my computer some as many times as this happens shoutdown and I don't know what to do.

    My graphics card is a Geforce nvidia series 8400GS./512MB/DDR3.

    This problem started after the installation of this video card. (Two months ago)

    Hi Dusazm,
    N Vidia drivers may be corrupt!
    Please see this link, it will help you solve the problem.

    http://pcsupport.about.com/od/findbyerrormessage/a/Nv4_disp-DLL-not-found-missing-error.htm

    Kind regards
    Chauvet J.
  • How can I get rid of the blue screen error?

    Original title: Windows Vista Start does not

    Hello
    I have Windows Vista Home Premium, and I've had it for 5 years now (2006-) the problem is that I don't know what happened, but when it restarts, I have two options;

    Startup Startup Repair (recommended)
    Start Windows normally

    When I choose "Start Windows normally", a blue screen appears with an error message and disappears quickly, leading me to restart my Vista again. However, when I select Launch Startup Repair tool, it takes a while and after a bit, it ask if I want to send the error to microsoft (recommended) and I choose Yes, and it takes a little more time to look for a solution. Finally, a list of appropriate actions appear;

    Startup Repair; I tried this 8 times now, and he cannot find a solution, leading me to reboot once more.
    System restore; I tried ALL the dates of the restoration, and none of them worked. I got an error saying: it cannot restore.
    Restore the computer; 1. I don't have a backup drive (it's a shame, I know) and 2. I don't want back up and lose all my files.
    Windows Memory Diagnostic tools; I checked all hardware error, and none have been found.
    Command prompt; I don't know what to do with it.

    If someone can PLEASE help me, I would be VERY grateful. I have very old memories and photos on this computer and I don't want to lose these. I am begging for someone to help me, and my last priority would be to forget all these photos and files and move: (.) Oh and I tried running safe mode, by pressing F8 while the computer restarts and I've highlighted Mode safe mode with networking, but it gives a quick overview of a blue screen just and hangs on reboot. Please help me on the procedure to follow for the good of my IMPORTANT files and memories.

    Thank you, in advance.

    Hi AffanX,

    Method 1: Try to disable automatic reboot in the menu start-up advanced options, and then try to capture the blue screen error message, see the link below:

    Advanced-Startup-options-including-safe-mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode 

    Method 2: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

    If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

    After disconnecting all external devices, run the Startup Repair

    Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem
    http://support.Microsoft.com/kb/934540

    You can see the steps below for more information

    Resolve stop (blue screen) error in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    (Article above applies to Windows Vista)

  • I get the blue screen error - error - Stop 0X0000008E

    -Stop error 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000)

    Hi I get the blue screen error - error - Stop 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000) and cannot use the pc in safe mode. I have XP - OS. I really don't want to reformat the HARD drive and you want to avoid reinstalling as much as possible

    Hi aromaveda,

    ·         Have you made changes on the computer?

    Follow these methods.

    Method 1: Follow the steps in the article.

    You receive a random "0x0000008E" error message on a blue screen in Windows XP

    http://support.Microsoft.com/kb/827663

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 3: Follow the steps in the article to check the drive for errors.

    How to perform disk error checking in Windows XP

    http://support.Microsoft.com/kb/315265

    Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  • Help to fix the blue screen error: STOP: 0x0000007A

    Original title: I get the BSOD on my Dell Inspiron 14 stop information is at the bottom.  What means this dose-specific code and how can I solve this problem?

    STOP: 0x0000007A (0xFFFFFFFFC0000056, 0x0000000058DB3860, 0xFFFFF8A000E42A48, 0xFFFFF960001E082C) he begins again each time after it happens like nothing ever happened, but I don't want my computer any crash if there is an easy way to understand what it means and set it would be nice.

    Hello

    Here are some of the more general methods that could help solve the problems of use as
    necessary (same as in the link below).

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
    This would help. Such as ITC and 4 others entered at the bottom left. And another error
    information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
    It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I get the blue screen error that says CONFIG_LIST_ failed

    I get the blue screen error that says CONFIG_LIST_ failed with the error stop

    0 x 00000073 (0xc000017D, 0 x 0, 00000001 00000001, 0xF90EEBB8)

    and no FAILURE, but also last Config mode. are not able to enter either. PS my CD rom drive has been inoperative for a long time so can't use reinstall disk

    and available good PC has no floppy. Can I use a flash drive to copy all the files needed XP recommended installation. disc?

    Hi philadel37,

    Unfortunately, you can not use the flash drive to restore system files or to solve this problem.

    You will need to use the Windows XP installation disk to perform a repair of Windows XP installation.

    See the article for more information about the Windows XP repair installation.

    How to fix a computer that does not start

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  • stop random blue screen error DRIVER_IRQL_NOT_LESS_OR_EQUAL STOP: 0X000000D1

    original title: stop random screen w/blue

    I need help to solve this problem. My system will freeze and then randomly crash if I run games, programs or just sitting idle. I took the fan and blew out the dust, etc... and still no better. The info I get blue screen are:

    DRIVER_IRQL_NOT_LESS_OR_EQUAL

    STOP: 0X000000D1

    nvstor.sys - address 83F42395

    Any help would be appreciated to gratly.

    Hello

    Here is a version of Vista of the troubleshooter that Dena referred:

    =================================================================

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot the BlueScreens - top 3 answers.

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    -----------------------------------------------------------------------------------------------------------------

    Check with your manufacturer for newer drivers video card (special forces), known issues and
    other possible problems - check also the video card and game maker forums. It can even be
    a problem created by the interaction of two pilots (rather than the usual cause), perhaps the
    video driver and a swap file error and other causes work together to create the problem.

    ==============================================================

    Even if you have done some of these methods here is the complete troubleshooting tool while
    dealing with his need.

    Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
    methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
    programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
    If necessary.

    BCCode: D1 0x000000D1

    Cause

    A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

    This bug check is usually caused by drivers who used a wrong address.

    If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

    • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
    • The function call was made to a function in another pilot, and that this driver has been unloaded.
    • The function was called by using a function pointer that was an invalid pointer.

    BCCode: d1 0x000000d1<-- read="">
    * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

    =========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
    are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly


    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Names of specific driver for the blue screen error Codes

    Hi all! Need your help please! Like so many others, I received Error Codes blue screen, that crash my system. I need to know the names of the specific drivers associated with these codes so that I can disable them (in accordance with the instructions of Windows), internet research has not helped. If anyone knows what are the names of the associated drivers or how to determine them it would be greatly appreciated! The error codes are:

    0x0000007E; 0XC0000005; 0X82D1F1C4; 0XF89EFB04; 0XF89EF800

    Thank you!

    Hi Anna K.

    When you encounter a Blue Screen of Death (BSoD) in Windows, the computer saves information about the error message in a log file. This log file or minidump file is saved in the subdirectory of Windows Minidump (C:\Windows\MiniDump). Generally the information stored in the minidump file can help identify the cause of the blue screen error message and help you solve the problem.

    For more information on the reading of the memory dump files, see the following article:

    How read partial memory dump files that Windows creates for debugging

    See also:

    How to troubleshoot a Stop error 0x0000007E in Windows XP

    Note The article above applies to Windows XP. However, you can follow the steps to solve the problem.

    If you don't have any service pack (SP) installed, please consult you may receive an error message "Stop 0x0000007E" after you enable the BitLocker Drive Encryption feature in Windows Vista

    In addition, you can also download the minidump files so here experts can analyze the cause of the error on a blue screen.

    See use SkyDrive download collected files and post screen shot/image

    Gokul - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • How can I disable the Welcome screens?

    I'm sure I'm ignorant, but how can I stop popping welcome screens everytime I open a program?

    Hello

    In order to disable the Welcome screen, please scroll to the end of the home screen, you'll find a checkbox that says: do not show welcome screen even once

    Please check only the box and that should turn off the Welcome screen from popping up, whenever you open the application.

    Harsha-

  • How can I stop the beach ball in safari in el capitan of spinning

    How can I stop the beach ball in safari in el capitan of spinning

    To start, please publish a report of Etrecheck: http://etrecheck.com

  • How can I stop the Firefox "remember" the password for a particular Web site?

    Usually, I like that Firefox remembered passwords. However, I don't want it to remember the password for my Yahoo email account. How can I stop the he remembering only this password, without losing other passwords remembers?

    You can use the following steps to delete the recorded data (form) in a drop-down list:

    1. Click on the (empty) input field on the web page to open the drop-down list
    2. Select an entry in the drop-down list with the mouse or the cursor key
      do not click with the mouse or press the Enter key
    3. Press the DELETE key (on a Mac: shift + del) to delete the highlighted entry

    See also:

    • Tools > Options > Security: passwords: "saved passwords" > "show passwords".

    Details such as websites to remember you (automatically log you) are stored in a cookie.
    So, you can erase cookies from Yahoo to Yahoo forget you, in the case where you put a check mark in the box to have Yahoo don't forget you.

    You can control and manage cookies for the domain currently selected tab:

    • Click the address bar onthe Site identity button"(globe/lock)
    • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
    • Click on "View Cookies" to view the cookies for the domain currently selected tab
    • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

Maybe you are looking for

  • Firefox12 shows no warning when closing multiple tabs

    Although I check "warn me when closing multiple tabs", Firefox fails to notify me when I open them and close them anyway. I checked the Boolean parameters "topic: config ' and they are set to 'true '. How can this be repaired? This is a drawback of h

  • Atheros ar5008 wifi not recognized on Equium A200 card

    Hi, I have a 1V0 Equium A200 (PSAF5E)I am running Windows 7 32 bit. I recently updated my router to a Netgear DGND3700.I bought a wifi card mini pci Atheros AR5008, the problem I have is that my computer does not detect it at all (Device Manager). I

  • Resolution/gfx G530 questions

    Hey everybody Hoping someone can help me here. My camera bought a G530 4446-25Z model. He has been downgraded to XP Pro and worked beautifully for 8 months. Suddenly, the oclours are just funny; mostlly in blue and similar in mode 256 colors. If you

  • Windows Media Center is unable to start with RF remote control

    WMC to: 6.0.6002.18242 (Vista SP2 - gdr.100414 - 0533) Remote control: Medion OR28v Vista remote control made by x 10 RF 1. a couple of days, I tried to start WMC with my remote in the normal way, but nothing happened at all. Normal start was always

  • palpitation in lower toolbar of pixel

    A line "pulsed" colored pixels suddenly appeared in all of the screen in the lower task bar.