How can I turn a picture I scanned just

Similar Questions

• HP OfficeJet 6700 Premium - How can I turn / adjust the automatic scanning of culture?

  Hello

  How turn on, turn off or set automatic cropping on my scanner?

  I keep getting picture errors when you try to scan a check to deposit into my car. Instead, the verification is automatically cropped I find I have to do it manually (as much as possible of the eye). I think that this manual effort contributes to mistakes of image, but maybe not. Previously, I had an AIO Photosmart C7280 printer and never had this problem.

  Any help would be appreciated.

  Dan

  I am told that the 6700 does not have the feature to automatically crop. Therefore, I use the custom function has been suggested earlier in this thread. I got used to it and it works fine. Next time, I'll make sure the printer I buy crop themselves automatically. I hope this helps.

  Dan

• How can I open my pictures.  I just downloaded 14 of 13?

  How open my photo file after you have downloaded 14 of 13 elements?

  See here:

  How to open my picture file to 14 elements just installed?

• "How can I turn OFF the ' don't publish pictures previously uploaded ' function?

  I downloaded pictures from my camera to my computer and accidentally deleted photos from the folder.  Also emptied the Recycle Bin - photos gone.  Tried to download again from the camera and get an error message "no new pictures or videos not found on this device."  "How can I turn OFF the ' don't publish pictures previously uploaded ' function?

  Help!  I need to download these pictures again.

  It is easy to add a new user account. Go in Control Panel - user accounts - add or remove some... you will see your main account and beneath the box 'create a new ac' - you want to choose administrator rather standard - give it a name 'Second Ac' or similar - add if desired password - choose picture etc, and you go! Maybe it's that the new account will also allow you to download the photos that will not the other account. If not you can simply copy them to the main account then giving yourself (Administrator) access authorization of the second account. This goes for computer-OS (C) - users (see figure below) and by opening your second account folder.

  (The "guest" account is an account of alternative rapid implementation you can leave a visitor can access their emails etc but are better left "off" otherwise)

  More you! R

  

• HP officejet 6700: How can I e-mail a document scanned since the Officejet 6700

  How can I e-mail a document scanned since the Officejet 6700?

  To send a scanned since Officejet 6700 document, follow these steps:

  1. press the power button to turn on the printer.
  2. press on the right arrow to display the second navigation screen.
  3. press the down arrow to scroll through the options of scan and then press the option that corresponds to the document or picture you are scanning.
  a. send an email in PDF format - use this setting if you want to scan and send a non editable text document in Microsoft Outlook or e-mail software.
  b. send an email in JPEG format - use this setting to scan and send pictures or images in Microsoft Outlook or e-mail software.

  Note: You can only send a scanned document if you are using Microsoft Outlook or other software as your primary e-mail program. You cannot use e-mail programs based on the software (for example, Gmail, Yahoo Mail or Hotmail) unless you can send and receive emails from your account by using Microsoft Outlook or a similar program.

• How can I turn off the laptop after restoring it to factory settings?

  Hello everyone

  I'm selling my Portege R830-10 q If I want to restore it to the settings to factory (out-of-box state) AND THEN TURN IT OFF.

  I brought the laptop to factory settings successfully using the _TOSHIBA recovery Wizard_ and choosing * factory default software recovery (Recover State out-of-box) *. However, at the end of the process of recovery and after everything is back in place I was not able to TURN off the POWER to the laptop. It only gave me the option to restart. After rephrasing it, the Windows installation process starts.

  I don't want to install Windows, i.e. language, keyboard, user account, etc. I want to leave the Windows installation for the person buying the laptop to me. How can I turn off the laptop after the recovery of the system without having to install Windows?

  I would appreciate your help.

  Concerning

  Pedro

  When the recovery process is complete and you are prompted for a reboot just press start button / stop and turn it off. I think it's only thing you can do.

  Anyway, why not start Windows and go through the configuration option. New owner can modify this basic anyway parameters. As username Admin and language and the keyboard can be set as default.

  For example, if you have a picture of German recovery set to German. New owner can change in any case.

• Why my OS took so much space and how can I turn off automatic Back-ups?

  Hi, I'm opperating on Windows Vista Basic Home Edition on top of a HP540 Tower, which has 160 GB hard drive.

  Except for the 20 GB Partition, I stayed with 129 GB to install a fresh on o/s.

  After installing my o/s and updates the 7Gig to clean Documents saved from after installation.

  I was left with 99 Go!

  Something wrong without a doubt!

  Even more, I'm losing memory on my hard drive like there is no tomorrow, 30 GB in 4 days!

  It seems every time I'm streaming videos, or even just to watch videos, an external hard drive.

  I lose about 1 or 2 GB!

  Using a number of antivirus programs, I scanned for a virus, but all programs concluded that the

  the system is clean and that there is no virus!

  This led me to believe that the system backup and restore several coppies of his car, then

  I have used the disk clean up to remove all but the most recent backup file.

  All of a sudden my disk space is increased from 69BG to 99 GB.

  I still don't know what happened to the other Go 20 or 21.

  Although this seems to be a difficulty, with in a few minutes that the backup has been busy writing far still and in

  15 minutes that I had fallen to 97.3 GB and deminuishing.

  Why my OS took so much space and how can I turn off automatic Back-ups?

  Thank you very much!

  Nothing wrong as far as I can see.  A Windows installation will take about 20 GB to 30 GB so it's fine, and you will lose even more space for virtual memory to system management file, hibernation, system restore points file and so on.  Although the "30 GB in four days" is perhaps a little on the high side, considering that you have just installed Windows, there are a lot of household, creating files and so forth go on these days.

  With the help of disk cleanup to delete these files from system restore is a bad choice, because they are created to ensure the security of your system and allow you to recover from any problems that may require them.

  If disk space is as big a problem to get a bigger hard drive and let the system restore to do its job.

• How can I turn off the display of the extra camera info?

  Hello. So I like Revel, for some pictures in my library, Revel poster info additional camera at the bottom of the image. It says 'Minolta Digital Camera', which is wrong in my humble opinion since there iPhone photos and disrupts a little slide show feeling. How can I turn that off?

  Any help is greatly appreciated.

  Apart from that - thank you very much for this wonderful app that allows me to wallow in memories related to images and gave me a solution to access my photos, I was looking for for a long time!

  Kind regards

  Christian

  Christian-

  Try typing the photo to enter in view of the magnifying glass and then tapping on the pencil icon. If it shows in the picture, it is possible that somehow the camera information is instead that we usually add captions. If so, you might be able to remove or change here.

  Guinot

• How can I turn off messages keychain

  How can I turn off messages keychain?  I don't remember password in keychain

  MacBook Air run Classic operating systems, this forum is on, or iOS, what is your signature also says you have.  Classic refers to an emulated operating system available on 1998-2005 Macs and starter on 1998-2003 Macs system.  iOS means on iPad, iPod Touch, and iPhone operating systems.  Keychain are controlled by the control panel to access Keychain on classic OS and utility set Mac OS X 10.0 - 10.11.6 and MACOS Applications 10.12 Sierra-> Utilities folder.  Reset the password instructions vary according to operating systems, usually via Apple menu-> system-> users and groups, or Security Preferences.

  Go to the Apple menu-> about this Mac to tell us what you are running, and someone can redirect you to the correct forum.

• How can I turn mirroring on airplay for ios10?

  How can I turn mirroring on airplay for ios10?

  Shot down at the top of any screen. Must disclose the control center, and then press with AirPlay Mirroring.

  Content how to airtime of your iPhone, iPad, or iPod touch - Apple Support

• I have 50 GB of iCloud and my computer is full because of photo storage problems. How can I get these pictures in my icloud? I checked all my settings. Everything is as it should be. I feel as if I had downloaded originals or something.

  I have 50 GB of iCloud and my computer is full because of photo storage problems. How can I get these pictures in my icloud? I checked all my settings. Everything is as it should be. I feel as if I had downloaded originals or something. I don't know how to understand it. I Googled, I tried to get on my computer. Emptied my Recycle Bin and my download folder. I know I must be missing something.

  We need to switch to "Optimize the storage of Mac", see it - http://www.imore.com/how-save-space-optimized-storage-and-icloud-photo-library

• My Whatsapp stopped suggesting words when I type the first letter how can I turn that back on FRO my six phone

  My WatsApp has stopped which suggests words when I type the first letter (s) how can I turn that on the back for my six phone more?

  Try: Settings > general > keyboard > predictive

• How can I turn off 'automatic selection' (?) on my menu bar?

  When I started to type an address in the toolbar, it climbs to an unwanted address... How can I turn off the ' auto connect, Auto - select "(?)

  Hi, please read dupresentarticle. Or go to Options > privacy (address bar) and position the nothing.

  Hope that answers your question.

• How can I turn off Hello

  the last thing I need is yet another stupid thing running in firefox. How can I turn off Hello?

  To turn off Hello, you can toggle loop.enabled false on the topic: config page.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• How can I move a picture of an event / Moment?

  How can I move a picture of an event / time to another in the same album?

  I am often confused about the difference between an event and a time.  Please forgive me if I'm using these terms incorrectly.

  I, (pictures) selected, top left, it says, 'Moments' in the header at the top of the page.

  I have 4 images in a row under "April 17, 2016" immediately below these 4 images, I have 1 image also under "April 17, 2016".»   With the good old iPhoto, I could simply drag the single image below, on the date above (with 4 images in a row), and that would give me 5 consecutive images.  Then, now empty it event / time would disappear.

  Just trying to consolidate my images in a logical way for me.

  Thank you.

  You can not.

  The library 'Photos' and 'Pictures' albums are automatically organized function import or taken the place and date.

  In the Photos, the equivalents of iPhoto events albums. This is where you can organize your images as you wish.

  You should find this message by another Member of this community very informative:

  Photos 2.0 vs iPhoto 9.6.1: features and capabilities