How can I turn my loading hourglass back in the circle?

Similar Questions

• HP5510 printer hung like a wireless network. How can I turn it go by laptop, on the stairs?

  I have a printer HP5510 hung like a wireless network.  How can I turn it go by laptop, on the stairs?  I always have to go upstairs % turn it on before printing wwill

  You can not, the printer must be turned on to make it work.

• How can I turn off wireless and bluetooth via the bios?

  "How to turn off the Wi - Fi in bios maps?

             

  I have a laptop Toshiba and Windows 7.

  Some specifications are necessary for me to work on a remote network. Bluetooth and Belarc test still does not work and I get the message"wireless cards must be disabled in the bios. »

  Without thread is DISABLED in the BIOS, also, I went to the network and the Internet and chose WIRELESS DISABLED ON HARD WIRED CONNECT and network cards, I DISABLED it. Also, I went to the network and sharing Center and changed the settings of the adapter to DISABLE.

  Wireless Configuration Utility > Broadcom Wireless Utility > "No currently no wireless available and active devices."

  Bluetooth is UNINSTALLED

  What else can I possibly? I would appreciate a solution.

  Thank you

  GVautour

  Hello

  Thanks for posting your query in Microsoft Community.

  You want to turn off wireless and Bluetooth via the BIOS, I suggest you ask to contact the manufacturer of the computer for that.

  Please do not hesitate to post, if you face problems with Windows in the future, we will be happy to help you.

• How can smartphones blackBerry I clear all, back to the original White phone?

  Hi all!

  OK, after 1 month of this phone, I had and want to sell it (probably ebay) and need to know how to clear all information out of it and return to the original new settings. Also, how can I clear the phone w / blackberry for someone else may register it?

  Thanks much for any help!

  Hello

  Please follow these directions for instructions.

  Good luck!

• How can I get my dell inspiron back to the setting of foctury

  Howe do my dell inspiron back to focture settings

  Hello

  Look for partition install factory hidden if you have one that it will reinstall to when new.

  Go to start click - technology - law - management - disk management.

  Your h/d would have 2 partitions 1 with letter C: with NTFS file system.

  The hidden restore partition would have no letter and a Fat32 file system with up to 6 GB of space.

  If there is, restart the computer and keep listen them to each of these keys F10 or F11.

  This should start a PC Angel or program ghost that will erase and format the hard drive, then reinstall Vista back to factory settings.

  Interviewed by the program you want to record your data say Yes.

  Navigate your computer manufacturers website.

  To make a recovery disk bootable DVD that can be used in an info your H/D fails.

  If you do not have a hidden partition, try http://www.restoredisks.com/

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• How can I turn off live bookmarks and use the other drive

  I regret that I checked the possibility to always use live bookmarks for my RSS FEED. Now I want to use bloglines, but when I click on the flow RSS to add to bloglines, live bookmarks appears and I can't have the power to add to bloglines. I'm so frustrated that I see red.

  Sorry for typo's fault. Obviously, the "Web Feed" entry in this case.

• How can I turn an image 90 degrees is the way it should be?

  Using a g series of HP Pavilion windows 10 running with all updates applied.

  Just Adobe Photoshop Premiere elements 14 and when I import an image that was taken as a portrait it is transformed into a landscape photo which means that it is on the side.

  I haven't used first Elements a lot in the past, but I don't remember what happens in previous versions. I just need to know how to activate the clip to the picture is right side upwards.

  I intend using Premiere Elements much more in the future so I'll need to know how to solve this problem, when it happens again.

  Thanks in advance for any help.

  P.S. I have version 12, so I'll see if it happens there.

  RayGoLXXV

  First elements 14/14.1 on 64-bit Windows 10

  At the level of the timeline, right-click on the clip, select either left 90 deg rotation or do rotate 90 degrees to the right.

  or

  Hightlight / select the clip in the timeline, go to applied effects tab/Applied effects Palette/Motion expanded Panel and the Rotation function there.

  Any questions, feel free to ask.

  Thank you.

  RTA

• My Whatsapp stopped suggesting words when I type the first letter how can I turn that back on FRO my six phone

  My WatsApp has stopped which suggests words when I type the first letter (s) how can I turn that on the back for my six phone more?

  Try: Settings > general > keyboard > predictive

• I have laptop (hp probook 4520 s), the touchpad does not work. How can I turn it back on it?

  I have laptop (hp probook 4520 s), the touchpad does not work. How can I turn it back on it?

  This is a question which would probably respond by HP support, because it isn't really a Windows problem.

  Are you sure that the touchpad is not just turned off? Many laptops have switches, power switch, so you can rest your palm while typing one is not worry by pressing the key.

  Sometimes, there is a button above the key, a key on the Ko, or some have a stain on the pavement you waiting/tap/double tap/etc. to toggle the pad.

  If not, you could try to go on the site of HP and DOWNLOAD/reinstall assistance the SW for the touch pad.

• My PC is equipped with large icons. How can I turn it back to normal?

  Original title: icons

  My PC is equipped with large icons. How can I turn it back to normal?

  Hello

  This should help you:

  "Show, hide, or resize desktop icons.

  http://Windows.Microsoft.com/is-is/Windows/show-hide-resize-desktop-icons#1TC=Windows-Vista

  To resize the desktop icons

  • Right-click the desktop, point to view, and then click large icons, medium icons or classic icons. (Classic icons are the smallest size).

  See you soon.

• Why my OS took so much space and how can I turn off automatic Back-ups?

  Hi, I'm opperating on Windows Vista Basic Home Edition on top of a HP540 Tower, which has 160 GB hard drive.

  Except for the 20 GB Partition, I stayed with 129 GB to install a fresh on o/s.

  After installing my o/s and updates the 7Gig to clean Documents saved from after installation.

  I was left with 99 Go!

  Something wrong without a doubt!

  Even more, I'm losing memory on my hard drive like there is no tomorrow, 30 GB in 4 days!

  It seems every time I'm streaming videos, or even just to watch videos, an external hard drive.

  I lose about 1 or 2 GB!

  Using a number of antivirus programs, I scanned for a virus, but all programs concluded that the

  the system is clean and that there is no virus!

  This led me to believe that the system backup and restore several coppies of his car, then

  I have used the disk clean up to remove all but the most recent backup file.

  All of a sudden my disk space is increased from 69BG to 99 GB.

  I still don't know what happened to the other Go 20 or 21.

  Although this seems to be a difficulty, with in a few minutes that the backup has been busy writing far still and in

  15 minutes that I had fallen to 97.3 GB and deminuishing.

  Why my OS took so much space and how can I turn off automatic Back-ups?

  Thank you very much!

  Nothing wrong as far as I can see.  A Windows installation will take about 20 GB to 30 GB so it's fine, and you will lose even more space for virtual memory to system management file, hibernation, system restore points file and so on.  Although the "30 GB in four days" is perhaps a little on the high side, considering that you have just installed Windows, there are a lot of household, creating files and so forth go on these days.

  With the help of disk cleanup to delete these files from system restore is a bad choice, because they are created to ensure the security of your system and allow you to recover from any problems that may require them.

  If disk space is as big a problem to get a bigger hard drive and let the system restore to do its job.

• I lost my iPhone 5 and the "Cell" switch is off. How can I turn on it from another phone?

  I lost my iPhone 5 and the "Cell" switch is off. How can I turn back on from another phone so I can activate "Find my phone"?

  You can not. There is no method to remote turn on/off all the settings on the phone. The only thing you can do is put it in mode lost through the computer and it remains to be seen if the device connects to a known Wi - Fi network. Otherwise, you'll just go out and pick up the old-fashioned way. You have it in Mode plane, or you just disable cellular data?

• How can I turn off the laptop after restoring it to factory settings?

  Hello everyone

  I'm selling my Portege R830-10 q If I want to restore it to the settings to factory (out-of-box state) AND THEN TURN IT OFF.

  I brought the laptop to factory settings successfully using the _TOSHIBA recovery Wizard_ and choosing * factory default software recovery (Recover State out-of-box) *. However, at the end of the process of recovery and after everything is back in place I was not able to TURN off the POWER to the laptop. It only gave me the option to restart. After rephrasing it, the Windows installation process starts.

  I don't want to install Windows, i.e. language, keyboard, user account, etc. I want to leave the Windows installation for the person buying the laptop to me. How can I turn off the laptop after the recovery of the system without having to install Windows?

  I would appreciate your help.

  Concerning

  Pedro

  When the recovery process is complete and you are prompted for a reboot just press start button / stop and turn it off. I think it's only thing you can do.

  Anyway, why not start Windows and go through the configuration option. New owner can modify this basic anyway parameters. As username Admin and language and the keyboard can be set as default.

  For example, if you have a picture of German recovery set to German. New owner can change in any case.

• How can I turn off the Sansa Fuze

  I just got a 8 GB Sansa Fuze now for Christmas, and I used it for 15 minutes between put some music on it and put it back into my computer, I deeply loved it.

  Now I feel really embarrassed to ask this question because I use a computer for 15 years and have been using MP3 plays since 1999.

  How can I turn off the Sansa Fuze? He said nothing in the manual. What combination of buttons/menu setting to turn it off?

  THX

  Don't be shy, I had a similar experience when I used Sansa.

  Keep the right sliding button for a second or two to turn it off.

  The key is to keep for a while.

  DocStrange wrote:

  I just got a 8 GB Sansa Fuze now for Christmas, and I used it for 15 minutes between put some music on it and put it back into my computer, I deeply loved it.

  Now I feel really embarrassed to ask this question because I use a computer for 15 years and have been using MP3 plays since 1999.

  How can I turn off the Sansa Fuze? He said nothing in the manual. What combination of buttons/menu setting to turn it off?

  THX

• How can I turn off Compatibility Mode for a program that does not require it?

  I loaded iTunes 9.1 program has 64 bit for Windows 7. When I open it, I get a message that the program has been set to run in compatibility mode. He then States for best results, turn off the compatibility mode for itunes before you open it. How can I turn off compatibility mode?

  Hello Wynn 1,.

  Article Apple: http://support.apple.com/kb/TS1489

  Try the following steps to turn off Windows compatibility mode:

  1. Quit iTunes.
  2. Windows XP and Windows 2000: on the Start menu, click my computer (or double-click my computer on the desktop).
     Windows Vista and Windows 7: on the Start menu, click computer.
  3. In my computer, open the drive C:\ (or according to your drive Windows is installed on).
  4. Open the Program Files or "Program Files (x 86)" folder if you use a 64 bit version of Windows Vista or Windows 7).
  5. Open the iTunes folder.
  6. Right click on the app to iTunes (iTunes or iTunes.exe) and in the context menu, clickProperties.
  7. Click on the Compatibility tab.
  8. If it is checked, uncheck the box under compatibility mode.
  9. Click OK.
  10. Open iTunes and play a song.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think