How can I uninstall Vista and put Xp back on__
How can I uninstall Vista and put Xp on, Windows Installer could help to put Xp back on?
General information about replacing Vista with XP:
A. on a computer OEM (HP, Sony, etc.):
1. go to the OEM Web site and find the XP drivers for your specific model computer. If there is no XP drivers, you can not install XP. End of the story. If there are drivers, download them and store them on a CD - R or USB thumbdrive. you will need after installing XP.
2. check with the OEM - either since their technical support site, either as - to see if you will cancel your warranty if you do this. If void you your warranty, you make the decision.
3. If the OEM supports XP on the machine, call them and see if you can qualify to demotion and ask them to send you a XP restore disc. This is by far the easiest and best way to put XP on the machine.
4. if XP is supported on the machine but OEM does not have a disk to restore XP for you, understand that you will need to buy a copy of XP to your favorite online or brick/mortar store retail.
5. also understand that you will need to do a fresh install of XP, so if you have any data you want back first.
6. If none of the above applies to you because you can't run XP which return (see point 1 above), the computer of the machine and buy a running XP instead.
B. on a generic/home computer built (of the non - OEM company)-you will need the drivers for all your hardware. See the second link below for more details:
http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic!
Tags: Windows
Similar Questions
-
How can I uninstall vista that came on my computer and install xp?
How to uninstall vista and install xp?
See if this applies to you, and if it does not affect your computer manufacturer:
Can I downgrade my OEM version of Windows Vista business to Windows XP Professional?
Yes. Right of demotion OEM desktop operating systems PC apply to Windows Vista business and Windows Vista Edition full, as stated in the terms of the license. Please note, downgrade versions OEM Windows Vista business and Windows Vista Ultimate are limited to Windows XP Professional (including Windows XP Edition Tablet PC and Windows XP x 64 edition). End users can use the following media for their downgrade: Volume Licensing media (provided that the end-user has a Volume License Agreement), trade retail (FPP) or System Builder hologram CD (provided that the software is acquired in accordance with the Microsoft OEM System Builder License). Use of degraded operating system is governed by the Windows Vista Business license terms, and the end user cannot use the downgrade and professional Windows Vista operating system. There is no right of demotion for Windows Vista Home Basic or Windows Vista Edition Home Premium.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If it does NOT apply to you:
You must do a clean install of XP.
Come on first, site of the manufacturer of your computer, check to see if your model computer has XP drivers available for it...
If the XP drivers are not available for your model, forget the idea.
If Yes, download and save to a CD or Flash drive.
Then buy a disc XP and license.
Save all your data because it will be lost during the installation of XP.
Then follow the steps below to do a clean install.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp
Once installed, reload ALL your other programs of original media, or download again.
Reload all drivers and utilities for your motherboard.
See you soon. Mick Murphy - Microsoft partner
-
How can I uninstall Vista Service Pack 2
Is there another method?Hello
"How to uninstall Windows Vista service packs as a troubleshooting step"
http://support.Microsoft.com/kb/948537
See you soon.
-
How can I uninstall vista defender?
I install windows 7 and after the windows Advisor current execution, he recommended to
uninstall my windows vista defender insalling before the upgrade.
I can't uninstall defender somehow. Can anyone support me?
Thank you
Hi MarizioWA,
Please see the thread below for a solution:
-
How can I uninstall 8 and back to 7?
I can't stand that constant stream of updates. Once more, FF break important extensions with an upgrade frequent unnecessarily.
Enough. I can't stand these unnecessary hassle. The main reason I use FF instead of others is the extension available. Keep break extensions... and he lost not only my time but it means that I can use as something else, right?
How can I get rid of 8 and back to 7?
Morning coffee and ghostery both of them are compatible with Firefox 8
- https://addons.Mozilla.org/en-us/Firefox/addon/morning-coffee/
- https://addons.Mozilla.org/en-us/Firefox/addon/Ghostery/
You can use addon compatibility reporter to use incompatible addon
Firefox 7
-
Vista has conflicts and no current update on my laptop and the mouse keyboard, so it is erratically. Since an upgrade of Vista has been added to my laptop, it has been in place. The cursor seems to have a mind of its own and I can't change the mouse settings. There is not an update to Vista since the device mouse or keyboard. After countless hours of lost looking for a solution, I decided to give up the garbage of Vista and I refuse to pay more money for the upgrade to Windows 7. So I want to go back to XP, but I can not install XP with the installation disc that came with the laptop. It stops the installation and tells me that I have a newer version of Windows. What I read, I have to do a clean install, but I want to do, so I do not lose the hidden partition that has been installed by Dell. Any help would be greatly appreciated! I've used Windows years but this abortion of Vista is too heavy for me. And it's like cancer, I can't seem to get rid of it! Time to think about a Mac soon, I guess.
A clean install will go to the C:\ drive and does not affect your partition recovery disk D:\ (as long as you tell him installed on C:\ assuming the disk that is the drive of the current system and disk D:\ is the recovery disc). Note that, with a clean install you will lose all your data (everything on the partition - not everything on the disc if it has more than one partition) then you should backup your data first.
Here is more information on the operation of a clean install: http://www.winsupersite.com/showcase/winvista_install_03.asp.
Frankly, I would transfer this question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in Windows Update issues will be more than happy to help you with your problem. Perhaps, it can be fixed without the need to resort to the downgrading to XP (and these people would be able to help as best as we).
Keep in mind that Mac have their own set of problems - different from Windows, but they are not without problems (and you probably have some software that works with Windows and it would be a shame to lose that). You just need to help solve your problem (or, if you wish, to return to XP which is probably more stable than Vista).
I hope this helps.
Good luck! Lorien - a - MCSE/MCSA/network + / A +.
-
how take off Windows Vista and put windows xp on? I get an error message.
I tried Vista windows on my computer but discovered that it is slow. I already tried to reinstall xp but I get an error message that says that I can't put it because the version of windows I have now is newer than the one I am trying to install. Help!
Hi bcbischo,
· How you install Windows XP?
· You boot from the Windows XP CD?
You need to boot from the Windows XP installation CD to start the installation. Read the following article.
-
How can I reinstall Vista and Microsoft Office
Hello world
I had Vista reinstalled in January this year and have since been away for 8 months and not used the computer. Now I come back I had a few problems with it (date and time keeps changing, Outlook gel etc.), although not major also tried to transfer the information from my laptop on the desk and really it mucked up. I have 2 and 3 copies of things etc. I have now transferred all the information on the desktop on an external drive. I copied it over, not save it. What I want to do is reinstall Vista Office and then the programs I want to. There is a lot of information that was on my machine, I don't want to. What is the right way, I have to do this? I need to remove the information from the desktop computer or reinstall Vista automatically will do that?
I sincerely appreciate your assistance. I only did the first reinstall it was made by a computer repairier.
Helen
Hi Helen,
If you try to start from scratch, the new facility is the option.
Note: after a clean installation, all data, programs, and drivers on the computer will be lost. It is recommended to make a backup of your important data before performing any installation. You need to reinstall the device drivers. Make sure that you back up office documents before re-formatting of the computer.
You can follow the steps mentioned in the link below to reinstall Windows Vista.
Installation and reinstallation of Windows Vista
http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista
Insert the office disc and start the Setup (.exe), follow the instructions on the screen to complete the installation.
You can post your query on Office Forums using reinstallation of Office
Office Forum
http://social.answers.Microsoft.com/forums/en-us/OfficeInstall/threadsThank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
-
I hate windows 8. How can I uninstall it and loading windows 7
I just bought an HP computer and it came with Windows 8, responsible on this issue. I tried 6 tasks in the past three weeks and each of them was a pain in the thigh. I had problems to the administrator, compatibility issues unique to other tray printer issues and much more. It is simply not worthy of the effort. Should I return the computer and buy a new one with Windows 7, or should I buy a copy of 7 and load it on top of this mess?
You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer. If there is no native driver, you will need to consider returning the machine and buying a machine preloaded with Windows 8 Pro with downgrade rights to Windows 7 Professional. Or look through the catalogue of manufacturers for systems already preloaded with Windows 7, usually the business sector will have these options.
-
How can I uninstall Windows 10 and replace it with Windows 7?
* Original title: new laptop
New laptop has Windows 10 I want 7. How can I uninstall 10 and replace with 7?
Option 1:
How Downgrade Windows preinstalled 10 for Windows 7/8.1
Option 2: (recommended)
How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first
-
How can I uninstall my old printer and install my new?
Original title: printers
My system is Windows Vista HomePremium with a 32-bit processor. My version of Web browser is IE8.
I recently bought a printer how can I uninstall my old printer and re-install my new printer?
Thank you.
Jery
Original title: printers
My system is Windows Vista HomePremium with a 32-bit processor. My version of Web browser is IE8.
I recently bought a printer how can I uninstall my old printer and re-install my new printer?
Thank you.
Jery
my old hp deskjet 2540 printeris and I want to in stall deskjet 2130
-
My Windows Defender turned OFF and I can't turn on.
Is it because I downloaded Windows Security Essentials?
If yes how can I uninstall Windows Defender from my computer because it does not show in the control panel
Hello
MSE disables by default the Defender
and no you can not uninstall then reinstall the Defender
It is part of the vista operating system
read this information on the Defender:
· If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default
the basics of Microsoft security has its own version of windows defender
and other anti-virus programs use their own particular type of application to scan for spyware and malware
It of nothing to worry and is the default action, which is designed for them to do
and if you need to change startup programs read this information on the other methods of doing it without using defender
using msconfig read this tutorial;
How to use MSCONFIG in Windows Vista
Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup
http://netsquirrel.com/Msconfig/msconfig_vista.html
and also try this program;
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more
-
I need to uninstall a game whose free trial period has expired. Uninstall cannot complete and he asks: corrupted Installer? "How can I uninstall this game I can not use and don't need?
Re-install and then uninstall it. If you can not re - install Revo Uninstaller Portableuse of reason.
-
How can I stop Vista Service Pack 1 download? I tried to download the service pack one and its deadlock in 83%...after 5 hours I hit stop installation, but it just gray out and don't stop - I'm afraid to restart because don't know what will happen. Help, please... I think that probably Norton it stopped completely download so I'm cutting of norton, but nothing is happening because I think that the serivce pack is stuck in the loop. Any advice would be greatly apprecaited. Can I reboot? Can I go back to a restore point? Thank you
Hello
This problem may be due to Norton or other software. You can restart the computer and check. If all goes well, you should be able to boot to the desktop without any problem.
The error message in the event viewer can point to the program which caused this problem.Reference:
Open event viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
What are the information in the event logs? (Event Viewer)
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-ViewerYou can download the latest service pack using the article below and verify if you are able to install it.
How to obtain the latest Windows Vista service pack
http://support.Microsoft.com/kb/935791 -
How can I uninstall adobe CD and reinstall the original adobe acrobat reader software
How can I uninstall adobe CD and reinstall the original adobe acrobat reader software
Sign out of your account... Uninstall... to run vacuuming...
-non-Cloud programs, to disable the service before uninstalling
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-using the vacuuming after uninstalling and before reinstalling is often necessary
-https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Download and install the old version by entering your serial number when required
kglad links in response to #1 here can help https://forums.adobe.com/thread/2017859
Maybe you are looking for
-
What is the resolution for USB-6210 for positive ranges of entry?
Hello I use USB-6210 to sample different types of sensors and each has its own range of values. I have two questions: (a) what are the fixed beaches of USB-6210 where most suitable is chosen automatically depending on the settings of user intput scop
-
the shortcut target program options
I have a shortcut that launches a program. I want to add one of the options of the program target of the shortcut, but all my test results field in a command syntax error message. The program options include an initial, possibly qualified path, file
-
KB890830 settles (XP Pro SP3)
KB890830 not install on my HP d220 MT (in DXDiag details below). I had this problem on multiple systems, but it's the only one that others have not worked on. There is no error code it says only: he will not be installed and does not show in Add/Remo
-
I guess I wrote almost everything in my title. The frustration trying to get Microsoft to accept my old computer files via USB key. How can I work?
-
BlackBerry Z10 sever contact bbm BB Z10
I have tried everything, please help, how can I remove a contact from Z10 BB bbm?