How can I update the BIOS without using a CD?

Similar Questions

• How can I update the BIOS without windows on V3 - 372

  I bought an ACER V3-372-57CW and refuses the computer at startup (the Green ACER splash screen at boot EFI appear same) when my Tablet WACOM Intuos 4 (if not fully functional) is inserted any USB port. Customer service Acer not recognize wanted to nor register the question so my last hope is that a BIOS update will solve the problem.

  I'm used to the manufacturers supplying utilities executable flash BACK running under FreeDOS etc but for the Acer V3 - 372, I can only find an executable for Windows 10. Of course, uninstalling the entire system just for the update of the BIOS is not a viable option.

  Is it possible to get either one executable for the update of the BIOS BACK or something that could be used from within Linux (with EFI)?

  Thank you

  Masquilier,

  At the present time, I have installed on my Windows computer.  If someone were to tell me that I needed to install another operating system to update the BIOS, I don't think it was a big deal.  I would like to...

  1. create a system with the Windows image backup

  2 clean the clean disk with 'diskpart '.

  3. install any OS they told me that I had to install.

  4. update of the BIOS

  5. after updating the BIOS, I would just wipe the drive with diskpart and restore my Windows system image.

  6. it would take me less than 45 minutes to accomplish steps 1 through 5.  Probably about 30 minutes to be honest.

  Use my logic.  Except that I'm not a Linux expert and don't know how to do what I tell you with Linux.  Just google it.  I see that some people use clonezilla, but I don't know there is a command to do the same.

  https://help.Ubuntu.com/community/DriveImaging

  http://AskUbuntu.com/questions/106943/back-up-the-whole-Ubuntu-system-or-system-image-creation

  http://AskUbuntu.com/questions/19901/how-to-make-a-disk-image-and-restore-from-it-later

  Check with the Ubuntu forum and tell them what you need to do and I'm sure it's possible.

  Important note: own Diskpart is priceless, if you n-front-rear of switching between the old modes and UEFI... or deleting partitions... or clean installation of an OS.  However, make sure that you don't accidentally wipe the bad drive (drive).  Be careful.  There is step-overs.

  Tip: you can get Vanilla iso free Windows from the links below... If you forgot to create a USB factory default your Acer Windows OEM recovery disk.

  https://www.Microsoft.com/en-us/software-download/Windows10

  https://www.heidoc.NET/Joomla/

  And create a media installation with rufus.

  https://Rufus.AKEO.IE/

  Tip2: the link below has some tips and tricks for cleaning 8.1 of Windows Installer or Windows 10.

  https://community.Acer.com/T5/V-and-VN-series-laptops/Acer-Aspire-v3-772-Windows-8-1-clean-install/t...

  Tip3: always back up your personal files before you try everything before.

• How can I update the BIOS on my Sony Vaio laptop using disc or usb? Note: I can't windows at all.

  Hi, I want to know how can I update the current bios on my sony laptop using the disc or usb.

  I can't access the windows on the laptop at all, because I'm getting STOP: 0 x 00000 "a5 error that says: your bios is not fully compatible with acpi.»
  This error prevents me to access any live disc or recovery disks.
  I would like to learn more about records tho method.
  Thank you.

  Take it to a repair shop, you have damaged the card mother/connections

• How can I update the view without freezing?

  Hi all

  I am trying to load more items in a list, as does the Twitter app

  

  When I want to load more items, I have done the following:

  • I shows Loader
  • I do the networking activity
  • I'm updating the view

  The problem is that the application UI freezes during the stage of "update view" (for 2 or 3 seconds).

  Because I'm not in the main thead element I update the gwendoline in the following way:

  UiApplication.getUiApplication().invokeLater(new Runnable() {
              public void run() {
                  synchronized (UiApplication.getEventLock()) {
                      while (MyList.hasMoreElements()) {
                           ...
                            ScrollableList.add(item);
                            ...
                      }
                       hideLoader();
                  }
              }
          });
  

  Is it possible to update the view without fix it the interface?

  Thanks to you all.

  Welcome to the support forum.

  invokelater enough, you don't have to synchronize the lock of the event.

  I don't know what is ScrollableList, but if you want to use a ListField, for example, you can add all the entries at a time.
  Even in other cases, as a normal Manager, addAll could be much better performance.

• Satellite Pro 6000 - how can I update the BIOS?

  Hi all

  I have the problem that my laptop does not start 9 of 10 times with the message: * block 1 BIOS is damaged, call your service man.

  I want to update BIOS but for the Satellite Pro 6000 I can only find an update the BIOS from Windows. But my laptop does not start! Rarely the machine starts, but when I try to update the BIOS, I get the message that I already have the latest version of the BIOS

  My questions:
  * Is there a BIOS update file that is a BIOS floppy? (for example the Satellite Pro 6100 has 2 BIOS files, 1 Windows and 1 making a floppy disk)
  * Is it possible to update the BIOS with the same version of Windows?

  Or perhaps there is another solution for this problem? Has no need to update my BIOS?

  Thank you.

  Hans

  Hello

  I agree with Luke.
  The rom Bios module seems to be damage.
  Either it must be replaced or flashed again.

  But you won't be able to do that! The update of the Bios on the Toshiba page focuses on winning and you will not be able to update if the windows are not running.

  You last chance is an ASP that could check the BIOS ROM.
  As I said, most high, maybe new reflash module Rom help but cela can be answered simply by an ASP technician who checked this.

• How can I update the Bios because of the question "plugged in, not load?

  I have a gateway computer, and all of a sudden I'm not into error on my charge battery.  I tried all the things people have mentioned in previous posts except to put updated my bios.  Gateway who told me to update them, but their steps did not make sense.  I downloaded the new software on a cd.  But from this point, that do I flash/update the bios?  I tried to start the computer with the disc, but it did not work.  Any help would be appreciated.

  I have three files

  BACK: Has Criskisk.zip, aceracdc.exe, phlash16, a rom and a wph file.

  Then I have a 32 Winflahs record and a record 64 winflash.  It looks like these have wflash mfc applications.

  So I think I have it all, just do not know what to click on and when.

  Hi ski2xtc,

  This would happen if the adapter is faulty or the charger on the motherboard component does not work.

  To update the BIOS to the latest version, you will need to contact the manufacturer of the laptop computer for more information.

  You can try to change the laptop battery and check if it charges properly.

  http://support.gateway.com/support/default.aspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• System freeze when it is opened the tool update BIOS, how can I update the BIOS?

  I'm trying to update the BIOS on my 14 (1016tx) want.

  I downloaded the latest BIOS from the HP website and open it, the dialog box has 2 buttons only start at 1, output 2

  Click 1 start, then another dialog box pops up saying not to stop your computer blablabla... and asks me to confirm, OK or cancel

  However, all input devices have no answer at this time. No keyboard, touchpad, usb mouse no longer works. USB ports seem to be put off, since the light on my usb key is off.

  The power button does not work neither. I continue to press it for about 1 minute, just can't turn off the machine and I have to remove the power cord and the battery to stop the crazy fan.

  p.s. I just installed the operating system. (Windows 7 Professional 64-bit) until I try to update the BIOS.

  Thanks for the quick response.

  I managed to fix everything on time. It seems that the problem was caused by the absence of HP_TOOL partition on my hard drive.

  I downloaded the UEFI BIOS HP update and installed it, he created a partition of 2 GB HP_TOOL for me, and then the BIOS update tool work (it will restart the computer to update the UEFI BIOS and BIOS update).

  P.S. Just wonder why HP releases suck a stupid tool. If it relies on a HP_TOOL partition, it should just say that instead of drive the crazy fan and disable all buttons!

• How can I start the database without using crsctl? ~ Xev

  Hey guys, it's Xev.

  I'm trying to recover cancellation based, and when I try to put the database to mount with sqlplus, it won't let me.

  How to use srvctl to put the database in a mode of editing?

  I stopped the entire stack of crs on both nodes, but I'm not clear on how to assemble the database now to the CCR?

  Thank you

  Xev.

  Xev Bellringer wrote:

  Ho Toby, when I try this command, srvctl start db d db_unique_name o mount

  It gives me the following two errors:

  PRCD-1027 unable to recover the RAC database

  RPRC-1070 has been unable to verify

  I have the GRID_HOME of source and I use root of course srvctl start because it is in srvctl.

  I have crs stack while I do this? If yes how do I start the CRS battery without the database?

  Hi Xev

  On this step, I'm assuming that you have defined cluster_database = false and have stop the CRS.

  Remember: -.

  1 take a full backup still running (assume that you already have).

  2. make cluster_database = false, before starting the recovery.

  3 went parallelmediarestore the RMAN parameter, because it can slow down the recovery process.

  4 restore the db.

  5. you start db.

  6. set cluster_database = true.

  7. stop your db in normal mode, immediate.

  8. start your database by srvctl

  Good luck...

  Concerning

  Jihane Narain Sylca

• How can I configure the columns without using code

  So, is it how, simply type in the information tab and everything that is necessary to get a peek, or it can be done only use code?

  So here is what I get, but I don't see how. When I try to create spaces / columns - it does not work. If I'm just trying to hit the SPACEBAR to create spacing, then only a single space. I am

  guess I could insert the jpeg and edit the files together when and if there are changes to the pricing, but that seems to be the wrong way to do it.

  

  Suitable tables involves using some code. Here's a way to do it: tables adapted in Pure CSS - Blog on technology of LivingSocial.

• How can I update the UI without encountering a ' Application is not responding do not; completed process '?

  I'm trying to populate a table on the screen, and when the user clicks a Labelfield (20 lines are populated by click).

  When the user clicks the labelfield, following takes place:

  (1) a data segment is read from the SQLite database in a background thread.

  (2) data are then filled in the existing table on the screen (by adding more fields to the Table Layout Manager) in the invokeLater() method.

  I am currently facing a problem of ' Application is not responding do not; process is completed ' when I continue to load more items to say about 3 to 4 times (i.e. After about 60 to 80 lines are met).

  I fear that this could be caused by the user interface thread get resisted for a long time, while the population takes place. Is there another way to update the user interface, so that the application runs smoothly?

  I'd appreciate any help that I had with this problem for some time.

  You must use another thread to query the database and then creating and filling in the fields. After the creation of fields use the Manager.addAll () method to add an array of fields (in invokeLater() body of course).

• How can I register my product without using the online process?

  How can I register my product without using the online process?

  He scored finally got.

• Satellite L300D - 24 d how can I update the graphics driver?

  Hello

  How can I update the driver for my ATI Radeon 3100 graphics card. (Win Vista 32 bit)
  I download and installed the new ATI Catalyst worms. 10.12.

  If I change my graphics card options, there is always the old driver installed... Worms. 22.04.08 8.479.0.0
  Also, it is not possible to change the settings for graphic resolution higher than 1280 X 800 Pix.

  Thanks for the help,

  Fun1975

  First, you must use the page to Toshiba display driver.
  The use of other drivers can lead to highest GPU temperature and cause overheating.

  But if you want to use other drivers, you can do so at you own risk.
  In order to install another driver, go to Device Manager, mark the graphics card, then press on uninstall button.
  Then the driver should be uninstalled.

  After you restart the laptop, you can try to install the new version.

  > It is also not possible to change the settings for graphic resolution higher than 1280 X 800 Pix.
  The internal screen for laptop supports 1280 x 800 high resolution. It is not possible to choose a higher value.

• How can I change the BIOS on Satellite A40?

  How can I change the BIOS on the A40

  Hi Denis,.

  Toshiba ensure an update based on Windows and a traditional update of the disk of the A40. The new BIOS can be downloaded from the Toshiba web site http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_bios.jsp?service=UK where you can also read the complete instructions on how to apply the new BIOS.

  Please read the instructions very carefully, as errors in the procedure can lead to costly repairs.

  Kind regards

• I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  -It used to work and for some reason, now it does not work

  Greetings, d_chiuch1104,

  There is one thing that I know that you need to check that COULD be your problem.  Open Control Panel (in Classic view) and click Folder Options (or, in Control Panel, click on appearance and personalization and then Folder Options).

  Open the view tab and make sure that "Always show icons, never thumbnails" is NOT checked.

  It would be good to hear from you as to whether that was the problem!

  GL - Bob

• How can I start my PC without using a password.

  Original title: startup

  How can I start my PC without using a password.

  Check out Skip the Windows login screen