How can I update to extension memory on the Satellite A100-192

Please I need help because I can not remove the cover to install the extension of memory. Thanks in advance.

Hello

I put t know why you are not able to remove this cover, but it should be fixed with one screw only and after the withdrawal of this screw, you must simply remove this cover that was placed in the middle of the lower part.

All that s. There is no magic key.

Tags: Toshiba

Similar Questions

  • How can I get all drivers installed on the Satellite A100-784

    Hi all...

    I have a Satellite A100-784 with * basic family Vista Edition recovery disk *...
    How can I get all the drivers on my laptop? ' coz when I open the folder of drivers (in c:\toshiba) I found that the WLAN and display drivers.

    A few years ago I had satellite L20, and there was an icon of the CD in the folder of toshiba in the c: partition, when I click on it; I could burn all the drivers on a cd...

    can I got this thing in my A100?

    Thanks indeed...

    Hello

    The drivers are part of the image of Toshiba that is stored on the recovery disk.
    So, you can use the Toshiba Recovery disk if you want to reinstall the Vista operating system and all the drivers and tools of Toshiba.

    By the way; Only Toshiba drivers are also available on the European driver Toshiba page.

    Welcome them

  • How to use the recovery on the Satellite A100-192 with 2 partitions CD

    I have a satellite a100-192 with 100 GB hard drive.
    When I bought it I used magic norton 8.0 partion to divide the disk into two partitions, c drive (used for files of program and other things; 20 GB) and d ' drive that I use for all my documents, music, videos and similar stuff...

    and now, because of a few bad shots, I made (the software bad... lol) I want to reinstall windows. and honestly, I have no idea how to proceed. what I mean, I don't know what cd to use (I have two CD when I bought the computer), in fact I guess that's the one with ms a note on it, but how to do it safely without losing all my data on the d drive?

    The problem is that I did a lot of relocations on desktop computers when you hava clean facilities and then I know what I'm doing, but I have no experience with bundled windows installations.

    Hello

    Usually, Toshiba laptops are supplied with a Toshiba restore CD.
    On this CD, you will find the image of Toshiba which contains all Toshiba drivers and utilities.

    The question is what CD image you received.
    Some people here in the forum suggested that, since January 2006 the Toshiba Recovery CD supports another recovery procedure. The new recovery CD does not support the ghost but the surface RECO and it s not possible to choose the partition for the installation of the OS.
    In this case the whole HARD disk will be deleted and you will lose all your partitions.

    I have only one old recovery CD and so I can't say if it is possible to choose the right partition. It was possible on the old recovery cd by selecting the expert mode.

    In my view, that should make a backup of you all important files before you begin the recovery procedure.

  • Need help with upgrade memory on the Satellite A100-250

    Help me with upgrade memory on TOSHIBA Satellite A100-250 up to 1024 MB.

    I want to buy an another slat memory ddr2-533 512 MB, what model exactly I needed to research, they were working in a pair.

    Sorry for the bad English. From Russia with Love.
    PS. I like to drink Russian vodka :)

    Hay

    Your laptop can be upgraded up to 2 GB and compatible RAM is DDR2 400/533 1 GB (PA3411U-1M1G).

    Use this part number in Google and you will find it.

    Bye and don t drink too much Vodka. ;)

  • Upgrade memory on the Satellite A100-467

    Hello!

    I want to upgrade my laptop memory 1 GB to 4 GB. I got the Satellite A100-467.

    What is the best memory for me? I'll get the Win7 32-bit operating system

    Can I use this http://www.fcenter.ru/products.shtml?eshop/act=h: a: 0:115: a: a: a: 0: a: 1:30:r:1:1 & oper = 74198 (SO - DIMM DDR2 SDRAM SEC (PC6400, * 800MGz *, CL6) or only 533?)

    Thannks for the help

    On the motherboard FSB speed is 533 MHz and compatible modules are DDR2-533, but you can use RAMs DDR2-667. 2 GB of RAM has PA3513U-1M2G part number.

    More on Aries compatible, you can find on the page of KINGSTON .
    Check it out.

  • Can what software I use to edit HD video using the Satellite A100-192

    Hello

    I bought a new HD video camera and I wonder if I can edit the video with first 2 on my laptop Satellite A100-192 with 2 GB of ram.
    If not, is there another program that will be faster but professional as Prime Minister to do you work?

    Thank you

    Hello

    Personally, I have no experience in using authoring software, but one of my friends use this program and it is not bad.
    I use Nero for editing and creation of film... Nero burning rom supports plug-ins extra which are really useful.

    Of course, there are 1 million other programs and products on the market. For example, a film of WinDVD Creator isn't bad.

    But in my opinion you should google a little and have read a few articles related to these applications...

    Welcome them

  • How can I enable the memory remapping in BIOS on the Satellite A100-192

    Hello!
    How can I enable the memory remapping in BIOS (5.90) on my laptop?

    Thank you.

    Hello

    It seems a problem with the Microsoft 32-bit Windows operating system.

    Please check this:
    http://support.toshiba-tro.de/KB0/TSB7601WE0007R01.htm

    You can find this info:

    _Issue: _
    I put in the memory 2x2gb in my book * and the BIOS * and the operating system is worth about 3 GB

    _Solution: _
    This is a limitation of the 32-bit system.
    System resources need of addressing which overlaps physical memory below 4 GB.
    These requirements can reduce available addressable memory space to and reported by the operating system

  • How can I verify that this subwoofer on the Satellite X 200?

    Hello

    How can I verify that this subwoofer?

    In certain circumstances I encounter or have the impression that his 'escapes' to the screen which, in my view, is not appropriate behavior.
    However, this phenomenon is not continuous and never appears while the laptop is not on the table (i.e. subwoofer is not horizontal)

    BR
    / Arek

    Hello

    I put t know what sound behavior do you mean exactly, but it turns out that the Satellite X 200 laptop is equipped with the Realtek sound nursery.
    You can find the settings in the control panel.

    This Realtek audio Manager control and sound effects, Dolby Home Theater sound configurations and configuration of additional speakers.

    These options affect the sound quality and the acoustic perception.

    Must play a bit with these options!

    Good bye

  • Question on the extension memory on the Satellite A80 117

    I have a question about the compatibility of memory.
    (The A8-117 is a Centrino 1.6 GHz (Pentuin M 730 processor) with Frontal 533 MHz bus and 2 MB of level 2, Intel® 915GM Express chipset)

    At the moment I have 1 chip of 512 MB (333 MHz, 2.5 CL) installed. I intend to switch to 1.5 or 2 GB. So what bothers me is: can I install a DDR2 533 MHz modules on this laptop (in this case the old 333 MHz one out)?
    Official website of Toshiba only 333 MHz DDR are provided, so that the 915GM express chipset allowes it.

    If it is not possible to 533, I guess I'll just buy 1 extra GB of 333 MHz DDR.

    Thanks in advance!
    Bostjan

    Hello

    At first, I want to say, which is always recommended to use RAM compatible and tested modules. On this way, you will be sure that it will work well and without any problems.

    According to the specifications of the laptop you can upgrade RAM to 2 GB max and compatible modules are: PC2700 512 MB (PA3312U - 2M 51) and 1024Mo PC2700 (PA3313U-2M1G).

    You can use faster RAM modules, but for me it is really not necessary. The specification of the laptop is the 333 MHz bus speed and faster modules will be not useful for laptop runs faster. It is best to buy 2 x PA3313U-2M1G and you will have no problem and portable will runs much more quickly than before.

  • How can I get "Protector Suite QL" on the Satellite X 200

    Hello

    Can someone please tell me how can I recover the software "Protector Suite QL' for my X 200 series lappy?
    I can't use the recovery CD because it is with vista home premium and I recently did a clean install of vista ultimate.

    I installed the finger printing software, but 'Protector Suite QL' couldn't find anywhere.
    Can someone please give me information if it is possible to get the recovery without OS cd? I mean, what with the bundled software.

    Thanks in advance

    Concerning
    Suraj

    The Protector Suite QL software has been bundled with the Toshiba laptop and found only in the image of Toshiba. If you want to use, you will need to retrieve the X 200 with the Toshiba CD.
    There's no other way to install this software because the program cannot be extracted from image on the other way.

  • Extension memory on the Satellite 2410

    Hello

    I intend to expand the memory of my Satellite 2410 601. It has 256 MB DDR at the present time. I plan on using a memory module 256 more to extend the total memory to 512 MB.

    I want to know is whether I can use one of the DDR memory module available in the market? Is there compatibility problems?

    Hello

    You know this site?
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5548&ft=m&St=3

    Here you can find details on the compatible memory modules for Satellite 2410 601.

    It seems that the laptop is able to manage the PC2100 200 pin memory (266 MHz) DDR SODIMM!
    You can upgrade the memory up to 1 GB (2 x 512 MB) max

    > Are there compatibility problems?
    You should generally have compatibility problems. It is only important that you use the supported modules.

    Greetings

  • How to get and replace a key on the Satellite A100-522?

    Hey, Toshiba.

    I have a Toshiba Satellite A100-522 model No. PSAA2E-01C01EED and one of my shift keys
    has broken below, so I can't use it (the small plastic bar to balance the key is broken
    If the key "blockages". Can I send it for repair to the warranty, and Ive talked to the
    seller, but I don't have the time to send it for repair (no laptop replacement in the meantime).

    Is it possible to get a new key and replace it myself? I know that some other laptop producers do the same thing,
    rather than use a lot of time on repairs, if they are too simple.

    Concerning

    John Reyes

    [email protected]

    Hello

    Well, it's very easy to replace the keys.
    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20727&MessageID=76283

    But if the key is broken you will need to replace the entire keyboard.
    To remove the keyboard, you have to remove the cover plastic thinking above the F keys.
    Under this coverage, you will find 2 crews secure the keyboard
    Remove the two screws and remove the cable from the flat keyboard which is connected to the motherboard.

  • How can smartphones blackBerry I erase memory on the storm?

    I need to return the Blackberry Storm, but before I do, I want to erase the memory of all the 'contacts', emails, etc..  How I do that without going point to point?

    Thank you

    RP

    Options > Security > General settings > Menu > wipe

    or

    Options > Security > Security Wipe

    Depending on your operating system installed.

  • How can I update several lines based on the comparison of the fields table 1 and 2

    I create the following SQL to test what I found a method to update the records where the fields below the game, but what ends up happening is that the update functions works the first time and then basically updates everything to null. I don't understand what I'm doing wrong. New to this.

    UPDATE SLS_HDR B
    DEFINE (B.ORD_DT, B.SHIP_ADD_CD, B.INV_ADD_CD, B.LOB, B.STATUS,
    B.ORD_TYPE, B.HDR_ROUTE, B.PRICE_LIST, B.CUST_ORDER, B.REF_A, B.REF_B,
    B.ORD_REF, B.ORD_DISC, B.SREP, B.SREP2, B.PLAN_DEL_DT, B.TXTA, B.TXTB,
    B.INV_CONTACT, B.SHIP_CONTACT, B.SOLD_CONTACT, B.PAY_CONTACT, B.ORD_AMT, B.UPDATED_DT)
    (SELECT =
    A.ORD_DT, A.SHIP_ADD_CD, A.INV_ADD_CD, A.LOB, A.STATUS,
    A.ORD_TYPE, A.HDR_ROUTE, A.PRICE_LIST, A.CUST_ORDER, A.REF_A, A.REF_B,
    A.ORD_REF, A.ORD_DISC, A.SREP, A.SREP2, A.PLAN_DEL_DT, A.TXTA, A.TXTB,
    A.INV_CONTACT, A.SHIP_CONTACT, A.SOLD_CONTACT, A.PAY_CONTACT, A.ORD_AMT, SYSDATE
    Of
    SLS_HDR_TEMP HAS
    WHERE
    A.FIN_COMP = B.FIN_COMP AND
    A.LOG_COMP = B.LOG_COMP AND
    A.ORD_NO = B.ORD_NO AND
    A.TRANS_DT = B.TRANS_DT AND
    A.BP_TYPE = B.BP_TYPE AND
    A.STATUS <>B.STATUS);

    Can someone advise?
    Thank you

    Published by: 903292 on December 19, 2011 13:15

    you don't have a where clause in your update so no-matched lines will be updated with null values

    UPDATE SLS_HDR B
    SET ( B.ORD_DT, B.SHIP_ADD_CD, B.INV_ADD_CD, B.LOB, B.STATUS,
    B.ORD_TYPE, B.HDR_ROUTE, B.PRICE_LIST, B.CUST_ORDER, B.REF_A, B.REF_B,
    B.ORD_REF, B.ORD_DISC, B.SREP, B.SREP2, B.PLAN_DEL_DT, B.TXTA, B.TXTB,
    B.INV_CONTACT, B.SHIP_CONTACT, B.SOLD_CONTACT, B.PAY_CONTACT, B.ORD_AMT,B.UPDATED_DT )
    = (
              SELECT
              A.ORD_DT, A.SHIP_ADD_CD, A.INV_ADD_CD, A.LOB, A.STATUS,
              A.ORD_TYPE, A.HDR_ROUTE, A.PRICE_LIST, A.CUST_ORDER, A.REF_A, A.REF_B,
              A.ORD_REF, A.ORD_DISC, A.SREP, A.SREP2,A.PLAN_DEL_DT, A.TXTA, A.TXTB,
              A.INV_CONTACT, A.SHIP_CONTACT, A.SOLD_CONTACT,A.PAY_CONTACT, A.ORD_AMT, SYSDATE
              FROM
              SLS_HDR_TEMP A
              WHERE
              A.FIN_COMP = B.FIN_COMP AND
              A.LOG_COMP = B.LOG_COMP AND
              A.ORD_NO = B.ORD_NO AND
              A.TRANS_DT = B.TRANS_DT AND
              A.BP_TYPE = B.BP_TYPE AND
              A.STATUS= B.STATUS
         )
    WHERE EXISTS
    (
         select null from SLS_HDR_TEMP A
         WHERE
         A.FIN_COMP = B.FIN_COMP AND
         A.LOG_COMP = B.LOG_COMP AND
         A.ORD_NO = B.ORD_NO AND
         A.TRANS_DT = B.TRANS_DT AND
         A.BP_TYPE = B.BP_TYPE AND
         A.STATUS= B.STATUS
    )
    

    OR using Merge

    Merge into SLS_HDR B
    using SLS_HDR_TEMP A
    on (A.FIN_COMP = B.FIN_COMP AND
    A.LOG_COMP = B.LOG_COMP AND
    A.ORD_NO = B.ORD_NO AND
    A.TRANS_DT = B.TRANS_DT AND
    A.BP_TYPE = B.BP_TYPE AND
    A.STATUS= B.STATUS)
    when matched then update set (B.ORD_DT, B.SHIP_ADD_CD, B.INV_ADD_CD, B.LOB, B.STATUS,
    B.ORD_TYPE, B.HDR_ROUTE, B.PRICE_LIST, B.CUST_ORDER, B.REF_A, B.REF_B,
    B.ORD_REF, B.ORD_DISC, B.SREP, B.SREP2, B.PLAN_DEL_DT, B.TXTA, B.TXTB,
    B.INV_CONTACT, B.SHIP_CONTACT, B.SOLD_CONTACT, B.PAY_CONTACT, B.ORD_AMT,B.UPDATED_DT ) = (A.ORD_DT, A.SHIP_ADD_CD, A.INV_ADD_CD, A.LOB, A.STATUS,
    A.ORD_TYPE, A.HDR_ROUTE, A.PRICE_LIST, A.CUST_ORDER, A.REF_A, A.REF_B,
    A.ORD_REF, A.ORD_DISC, A.SREP, A.SREP2,A.PLAN_DEL_DT, A.TXTA, A.TXTB,
    A.INV_CONTACT, A.SHIP_CONTACT, A.SOLD_CONTACT,A.PAY_CONTACT, A.ORD_AMT, SYSDATE)
    

    HTH...

    Thank you

  • How can I disable tap-to-click on the Satellite C660/C660D?

    There is no option to disable it on this laptop, I looked for the answer online but nothing, there seems to be no way to do it on this laptop model. I tried to download the new driver for touchpad of the site but had absolutely no effect and gave me more options to turn it off, it has changed nothing. Now completely stuck and its driving me crazy!

    The mouse click also on its own randomly even if Im not to touch, always seems to hurt when im game.

    I still want to use the touch pad to move the pointer autour, just don't want to use it to click.

    As far as I know the Satellite C660 supports Synaptics touchpad.
    The Synaptics touchpad driver should support the tap to click option.

    In order to ensure that Synaptics driver has been installed.
    Then go to control panel-> mouse-> last tab (button settings)
    Now, you need to access the properties of Synaptics and here you should find the option called tapping

Maybe you are looking for

  • Is it possible to change the LOCATION of the stored passwords?

    I would like Firefox to store my passwords, but I don't like anyone can open just the browser to find all my data. Yes, I have a master password, but I know that is hard for anyone to go into the data files and decrypt the password files. What I woul

  • cRIO 9076 Kiethley timeout

    Hello. I have problems to make my cRIO to control my Keithley 2400. I have two devices connected via an RS-232 cable. I can find the Keithley by using MAX in serial & parallel options and it indicates that the device is functioning properly. I open t

  • Use the old charger with new T510 T61?

    I was wondering if I should buy a new charger or if I use an old I hang out. My T510 came with a 65 watt charger p / n: 42 T 4422 Old T61 charger is a watt 90 p/n 92 p 1109 Both are 20V and vrtually identical caps. I would just plug to see if it work

  • Reference Dell W2600 (dvi) and Toshiba A3 HD DVD

    Question - when I connect to the HDMI to DVI (tv) (dvd player) the only colors I get arered and green (correct the HDMI/DVI cable). When it is connected to the component part of the TV picture is fine. So, what with the DVI on the TV?

  • How do the difference between variables?

    Hi allI used normal '-' between the variables after variables or is there a function these diff or the difference of?I couldn't see the function as such to run the subtractionCould someone suggest how to deal with this?Thank you and best regards,Rama