Similar Questions

• How can I remove a JPEG file in an email I want to send in windows live mail

  How can I remove a JPEG file in an email I want to send in windows live mail

  Click on the file name of the attachment in the message composition window and press DELETE on your keyboard.

  Windows Live Mail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page. You are probably asked to give your version of WLMail and Windows so that the answer may be more accurate.

  Noel

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

• How can I use these BIN files?

  I installed Oracle coherence system on my desk. I find there are many files in the BIN directory. What they are?
  How can I use them?
  
  Thank you
  ------------------------------------------------------------------------------------------------------------
  
  CD %COHERENCE_HOME%/bin
  dir
  
  28/06/2009 15:00 < DIR >.
  28/06/2009 15:00 < DIR >...
  2009-06-28 15:14 709 hide - server.cmd
  28/04/2009 14:51 545 cache-.sh
  28/04/2009 14:51 1 035 coherence.cmd
  28/04/2009 14:51 884 coherence.sh
  28/04/2009 14:51 600 datagram - test.cmd
  28/04/2009 14:51 369 datagram - test.sh
  28/04/2009 14:51 550 guidemo.cmd
  28/04/2009 14:51 318 guidemo.sh
  28/04/2009 14:51 609 multicast - test.cmd
  28/04/2009 14:51 372 multicast - test.sh
  28/04/2009 14:51 546 optimize.reg
  28/04/2009 14:51 992 readme.txt
  12 s 7 529 bytes
  2 dir 10,418,708,480 bytes free

  Great question! I think you'll like the new [documentation | http://download.oracle.com/docs/cd/E14526_01/index.htm] including the new Getting Started guide, which describes the installation (chapter 26). There is also a new tutorial and Developer's Guide.

  Precise the answer to your question:

  Items ending in ".cmd" are Windows batch files and the items ending in ".sh" are Unix/Linux shell scripting.
  * "cache-server" starts a cache server
  * ' coherence' launches the coherence command line utility
  * ' datagram-test' is a test run to check that their flow is as expected
  * "guidemo" starts the GUI demo
  * ' multicast-test' is a test run to check the operation of multicast networks
  * "optimize.reg" is a Windows registry file that contains some optimizations proposed; See also the list of production control guide

  Peace,

  Cameron Purdy | The Oracle coherence

• How can I use a .mov file in 11 elements Adobe?

  When you use Adobe Premiere elements 11, audio from a ".mov" file but the video does not.  How can I see the video of my file without losing the HD quality?

  conboy_77

  What operating system is involved?

  Part of the requirements is the latest version of QuickTime installed on your computer with Premiere elements 11. You have the latest version of QuickTime installed on your computer as well as the first items 11?

  There may be other factors, but more than likely situation caused you by the latest version of QuickTime is not installed.

  Please check this. If this isn't the case, then we need to dig into the properties of your video file with the .mov file extension.

  Please review and then we can decide on what was then based on details in your response.

  Thank you.

  RTA

• How can I change a jpeg icon to display the image instead of the icon

  Just changed my icons on the desktop for JPEG files on himself.  Oh I'm sure I did something, but I don't know what.  My icons for JPEG files on my desktop and other places to view the actual image.  Now it shows just that little thing of ugly icon. I wish that my photos in return.  Also, my files on my desktop used to show what was in the file, a little, now they just look like empty folders, even if they have things inside of them.

  Can someone help me change my office back to normal?
  Thank you
  Mel

  Suggestions:

  1 sounds like it comes from a recent issue. If you remember a "good date" when you did not have this problem, a system restore.
  Choose this "good date" as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  2. rebuild your icon cache.

  http://www.SevenForums.com/tutorials/49819-icon-cache-rebuild.html

• How can I use notifications to send data from different sources for the same chart?

  Hello

  I use the model of 'Continuous measurement and logging' project comes with LV 2013.

  It is extremenly helpful in understanding the messaging between the acquisition, graphic and loops of newspaper. (Thank you NEITHER!)

  I ran into a snag though.

  I want to change so that my graphic loop receives notifications of data from two sources of acquisition by the declarant.

  I have trouble getting the data from the two sources to display on one graph.

  I've isolated the problem in the attached vi.

  Here's what happens:

  1. I create 2 parallel loops data and send the data to a third parallel loop with the notifiers.

  2. the third loop receives data from one of the loops because one of the authors of just receiving notifications is to expire instead of receive data.

  Can anyone suggest how can I fix?

  Thank you.

  -Matt

  Here's my modification of your VI. I put notes on the block diagram to explain the changes. He uses a queue for data transfer to avoid data loss. It uses a notifier to stop loops. All local variables and value property nodes have been eliminated.

  The way loops are arrested probably let some data in the queue. No more of one or two iterations of each of the loops of data acquisition. If you need ensure that all data has been displayed (or recorded in a real application), then you must stop acquiring loop first and read the queue until you know it's empty and both other loops stopped. Then stop the render loop and release the queue and the notifier.

  Lynn

• How can I use the Eps files?

  Hello world

  I have download vector design business of brochures "shutterstock"... But I don't understand how I can modify and use in indesign

  I want to switch to indesign layers and modify

  InDesign is not a publisher of eps. The InDesign model is to imitate the glued model that designers were familiar with days before computers. Text blocks and graphics are arranged in the pages of a document, and if you wish, several documents can be run together like chapters in a biggest book, with the possibility to index, create a table of contents and have notes.

  Shutterstock brochure is really an eps? I guess it could be, but eps is a format which is largely abandoned these days. It could have been made from a variety of programs, but change isn't really the purpose of the eps. You want to get the original files that it was generated from and he change it. Illustrator is a program that can edit the eps files created in Illustrator, but this is not practical if they are Illustrator eps files. You can change some other programs with Illustrator eps files, but it can be much harder to do this is to create the file from scratch, depending on how it was interpereted by the Illustrator. Best bet is to get the InDesign files, if you want to work in InDesign.

• How can I stop the jpeg file opening in photoshop raw conversion prompt

  CS4

  Please stop replying by e-mail.

  

• How can I use two counters to capture a pulse ttl for a specified time

  Configuration: Card counting 6062 PCI w / BNC 2121 Board running under LV 9.0 PerkinElmer Avanlance Photodiode (SPCM-AQRH-13)

  I searched through the forums and fell on the theme of framing an image while collecting signals from a source for a specified time.

  The example in terms of falkpl in 2005:

  "

  Dismal Hello,

  I'll try to point you in the right
  direction to start coding the application, but do not forget my
  suggestions have to be modified to your specific request.

  For
  the task output redeclenchables finished meter you need to
  your counter seconds in this application, I suggest to take a look
  in the Finder example in LabVIEW ('Help' are examples) and less
  DAQmx hardware entry & exit"" generating digital impulses.  Here,
  you will find some Gen dig Pulse - Retriggerable.vi.  You can use this for
  Create your door 4 pulses ms it's over (not a pulse train) and
  redeclenchables (for each time you go to the next step.

  In
  regards to the configuration of the first counter, there are several things to
  consider, and I can offer initial help to get set up.  You
  in-house allows to route internal CTR1 (4ms of pulse) output for your CTR0
  Door to measure only during the time.  Here are additional
  Info to do this in LabVIEW.  The source of your task of edges ABOVE County
  will be the TTL signal you are measuring and counting.  It comes
  on the PFI line that corresponds with CTR0 Source.

  When
  you make a measurement finished with CTR0, you will take only heads while
  the door is high and your source has a rising edge.  You can set the
  measure over to start on a trigger, which is not clear in this
  for example, that you have identified.  Since you know that you have a finished 4ms pulse
  time to measure, you can set the duration of your measure
  as a result.

  I found this
  Forum which may help some, but the coding is
  textual.   I hope this can give you a good starting point for
  programming.

• How can I get my RAW files to open in photoshop?  I use a Sony Alpha NEX - 7 shooting JPEG and RAW.  Open end JPEG but RAW only.

  How can I get my RAW files to open in photoshop?  I use a Sony Alpha NEX - 7 shooting JPEG and RAW.  Open end JPEG but RAW only.

  This camera is supported in Camera Raw 6.6 and newer. This means that you need to Photoshop CS5 or newer version to have the support of the camera. What version of Photoshop are you using?

• How can I change my PDF files to JPEG in order to put them online

  How can I change my PDF files to JPEG in order to put them online

  Maybe a video will help: How to convert PDF to JPG using Photoshop - YouTube

• How can I restore my backup files on an external hard drive using Windows XP SP3?

  I back up my files to an external hard drive using windows XP sp2. My pc crashed and re installed with Windows XP sp3. Now I can't find the backup on the system tools utility. How can I restore my backup files. Help, please.

  Hi PML.

  Yes, I used the built in «Back to the top of the tool» Unfortunately I don't have the CD. My Netbook is a HP mini computer that comes with Windows XP home. Thank you for your help and I hope to hear from you again.

  How do you reinstall Windows?  If you have used the HP Recovery system to recover from a hidden partition, backup should have been reinstalled.

  I suggest you call HP support.

• How can I recover all my files that I lost in an accident? I had to use my system recovery disk and install drivers for my computer again. I lost all my files. Is there something I can do?

  Help!  How can I recover all my files that I lost?  I was answering an e-mail message when I heard a couple of clicks then my computer off.

  I thought that my computer was destroyed.  Nothing I tried would bring it to the top, so I decided to use the system recovery disc that

  came with my computer.  I've also downloaded all the drivers for the application.  My computer is back on, but I lost everything.

  It's like putting into service with a new computer.  I had a lot of important information in the files that I lost.  I've tried everything I know to do

  without success.  Is it still possible to recover these lost files?  Thank you very much for your help!

  Hello

  I'm sorry, but when you did the recovery of the system you have disabled your hard drive of everything, including your files.

  You now have a new computer.

  You can try this program (it's free) to see if he 'can' find and recover your files. no guarantee:

  http://www.Piriform.com/Recuva

  See you soon.

• How can I use windows search to search for pdf files containing a specific word?

  I have a folder with several pdf files. When I use windows search for a word that I know exists in one of the files, I get no results. It does not work when I use the content: either.

  How can I use windows search to search for pdf files containing a specific word?

  Do I need to install something to activate search within .pdf?

  If you use Win7 32 bit, the iFilter is bundled with Acrobat Reader 9. On Win7 64-bit, you will need to install it separately.

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=4025

  Peter