How can I use two DVI and HDMI outputs for monitors?

Similar Questions

• How can I use Tracert to and ESXi 4.1 host?

  How can I use Tracert to and ESXi 4.1 host?  I tried Tracepath and get "command not found", like tracert. I sswear I did this before 3.0 days.  I looked in/usr/sbin not tracepath or tracert.  I don't know I'm missing something very obvious.  I do not have access to this host console, but I ran the "check network connections" of the console and he spent when I place this host.

  ESXi is not a Linux console as ESX 3.x did. He uses a tiny console shipped based on busybox and missing most of the commands that would be available in a full Linux installation.

• How can I put merge Toolkit and direct mail (for office) on a MacBook OS?

  How can I put merge Toolkit and direct mail (for office) on a MacBook OS?

  They don't seem to offer a Mac version. See https://www.mapilab.com/support/faq/system_requirements_outlook.html

  You can use the following to contact them to check that: https://www.mapilab.com/about/contact.html

• How can I use two counters simultaneously to pulse width measurment

  Hello, everyone!

  I'm new to Labview. I currently have some cDAQ9171 and width measurment with 9401 impulses. My understanding is that the 9401 was 4 meters, which means that I can use these meter separately. However I have the following problem.

  1. I use ctr 0 and ctr 1 (PFI 1 and PFI5) to measure two different impulses. However, it seems that there is an interference between two counters. How can I make two counters working simultaneously and separately?

  2. I first try a pulse width measurment counter in Labview signalExpress. My pulse width is about 0.4ms. However, I can't get the right result, if I choose the starting edge is on the rise (the results always around 20ns. Only if I revise my pulse and pick the starting edge is down, I can get reliable results.

  I'm confused about these issues for about 3 weeks... Is there someone can help what can I do with that?

  I have attached a simple vi...

  Thank you very much!

  
  

• How can we use, "Create trigger and replace" using the oracle form

  Hi all
  How can we use the following creation or replacing the trigger in the form of oracle?
  Please help me.
  
  CREATE OR REPLACE TRIGGER app_user.after_logon_trg
  AFTER LOGON WE app_user. SCHEMA
  BEGIN
  DBMS_APPLICATION_INFO.set_module (USER, "Initialized");
  EXECUTE IMMEDIATE 'ALTER SESSION SET current_schema = SCHEMA_OWNER';
  END;
  
  Sarah

  user434854:

  Your information is good enough about the use of roles. This is the model of security that our customers use. Only assign us a password for roles and issues of connection of users shape the grant sql role using the password is used since in the form.

  However, I agree with Andreas on the hard coding schema owner. We have several clients, and each of them has a different name for the owner of the schema. By creating a public synonym for access to our forms tables, our forms work well at all sites.

  And after 325 posts, why don't give you yourself a real name on the forum?

• How can I use two different PC with Lr5.5 to manage and process my photos stored on the external drive and swap the analysis between these two computers?

  I ran two computers and would like to be able to download Lr jobs made on my laptop, my PC fixed, also used to treat other images, all stored on the same disk.

  In other words, I want to deal with may photos on both PC and have access to all analyses of one or even two computers better regardless.

  Samek.

  This was very helpful. Thank you very much

  Samek

• I used Microsoft for years.  How can I use my files and store and add to them with the I mac

  I used Microsoft for years.  How can I now access my stored info and edit and add to my files with my Apple I Mac. Having problems to work with files in the mac

  I used microsoft years how can I access my stored info and edit and add to them on the Mac.

  This can help you get started > https://www.apple.com/support/macbasics/

  Additional help here > https://support.apple.com/en-us/HT201732

  A good resource for help on your Mac is easy to access. Click on an empty area anywhere on your screen. You should see Finder > file > edit > view > go > window > help at the top of your screen.

  Click on help > Mac Help then type in a keyword for what you need to help in the search field top right of the Help window.

• How can I use two counters to capture a pulse ttl for a specified time

  Configuration: Card counting 6062 PCI w / BNC 2121 Board running under LV 9.0 PerkinElmer Avanlance Photodiode (SPCM-AQRH-13)

  I searched through the forums and fell on the theme of framing an image while collecting signals from a source for a specified time.

  The example in terms of falkpl in 2005:

  "

  Dismal Hello,

  I'll try to point you in the right
  direction to start coding the application, but do not forget my
  suggestions have to be modified to your specific request.

  For
  the task output redeclenchables finished meter you need to
  your counter seconds in this application, I suggest to take a look
  in the Finder example in LabVIEW ('Help' are examples) and less
  DAQmx hardware entry & exit"" generating digital impulses.  Here,
  you will find some Gen dig Pulse - Retriggerable.vi.  You can use this for
  Create your door 4 pulses ms it's over (not a pulse train) and
  redeclenchables (for each time you go to the next step.

  In
  regards to the configuration of the first counter, there are several things to
  consider, and I can offer initial help to get set up.  You
  in-house allows to route internal CTR1 (4ms of pulse) output for your CTR0
  Door to measure only during the time.  Here are additional
  Info to do this in LabVIEW.  The source of your task of edges ABOVE County
  will be the TTL signal you are measuring and counting.  It comes
  on the PFI line that corresponds with CTR0 Source.

  When
  you make a measurement finished with CTR0, you will take only heads while
  the door is high and your source has a rising edge.  You can set the
  measure over to start on a trigger, which is not clear in this
  for example, that you have identified.  Since you know that you have a finished 4ms pulse
  time to measure, you can set the duration of your measure
  as a result.

  I found this
  Forum which may help some, but the coding is
  textual.   I hope this can give you a good starting point for
  programming.

• How can I use both scrolling and vertical scroll?

  Hello

  I am new to Blackberry. I have drawn on the use of horizontal and vertical scrolling scroll, however there is no adequate solution (or there is really no way?). Furthermore, I'm showing a datagrid on the screen, but it does not fit in the screen. There are twelve columns and more than a hundred lines which are not editable or selectable.

  Thanks for your replies!

  If you override Manager.moveFocus () you can manually call setVerticalScroll() or setHorizontalScroll(). You can use the status of the function moveFocus to say if you move vertically or horizontally.

• How can I use two drop-down lists for a time value?

  I want to enter the length of time someone did something in hours and minutes using two drop-down lists, then enter it as a time value only (├a) in Mysql.

  I used the dropdown database lists and a few different variations of what follows without success (seconds is a hidden field with a value of "00"):

  GetSQLValueString (strftime ("% H: % i: %s", strtotime ($_POST ["sleeptimemin"].))) " «. $_POST ['sleeptimehr']. » «. (_POST ["seconds"])) $, 'date').

  This comes back to 00:00:16, regardless of what is selected in the drop-down list.

  Any help would be appreciated.

  MySQL stores time in human-understandable format, using the 24-hour clock.

  GetSQLValueString($_POST['sleeptimehr'] . ':' . $_POST['sleeptimemin'] . ':00', "date"),
  

• How can I use my Sony TV as a computer monitor via the Wi - Fi connection, it uses for file sharing?

  I "ve connected brand sony LED tv with WI - FI connectivity (router) connection. Currently I am able to view the media files from my shared folder. Now, I want to display my monitor on the TV. How can I do?

  Hey joshi;

  I understand what you're asking, and the answer is no. It's just not possible that the way things are right now. There are several ways to get your desktop on your TV, but unfortunately wifi isn't one of them.  Your best bet would be to just connect your laptop to your TV with vga or hdmi, and then use a wireless keyboard and mouse.

  I hope this helps.

• How can I make the biscuit and then break for both sides and have a few small pieces?

  Hello

  Please tell me...

  How can I make the biscuit in AE and then break for both sides and has a few small chips fall?

  any help would be so appreciated...

  Strictly within EI, you have two options. Breaking with custom maps shatter and masking + particle effects. Wouldn't conviceing as Dave.

  If you have access to a 3D application (blender is free) you can do it here.

  This is a project of 2 minutes in AE with a stock image:

  

  with one broken high buscuit animated to adjust to the split, it might be unconvincing.

  Here's the project CS6 ASP file for you to play with. Take a look at all the elements to see how it worked by selecting all layers, then pressing the key u twice to see what I changed.

• How can I get my number and product key for windows xp home edition 2? ___

  my mother-in-law is trying to reinstall windows xp home edition 2, but does not have its product number or key... How can I find out who it is?

  Thank you very much!

  What brand is the PC?  Most system builders put the key on the side of the Machine.  If it's a laptop, it should be on the bottom of the laptop.

  It is all the information that we will be able to give you.  If you are unable to find the key, then you will need to purchase a new license.

  Serving the community a computer at once [link to paid support not allowed in this forum] Please post a reply to let us know whether or not our response helped.

• How can I use 2530 b and 4065 to measure the resistance between two selected pins?

  I want to be able to select 2 corners on a test with 2530 b set-up and measure the resistance between them with a 4065 DMM (PXI all). Ankles in question are each in blocks of 32 different poles, so I can match them in a double configuration 32 x 1 four or 64 x 1 if necessary. I can measure the resistance between several different pine sets as 0 on 33 pine pine, pin 0 at pin 34 pin 0 to 35 pin and pin 1 to 34 pin, pin 1 pin 36, etc.

  I understand how to measure resistance between a given pin and Earth using the the 2530 4065/b using the wizard OR-DMM/Switch Express, but it is unclear if I can measure the resistance between the two pins of selected by different user. I am a newbie of labview, used to write things in c#, so it may be something very trivial (I hope).

  Any ideas?

  Thank you

  -Russ

  Hey Russ,.

  I recommend starting with the following example (located in the Finder the example ('Help' to find examples):)
  "" Material input and output"Modular Instruments ' OR-Switch" niSwitch Dmm Switch Handshaking.vi

  Because you use a scan list, you can simply drag the two connections to the same entry and then the switch will wait for the two to settle before you send a trigger of the DMM... problem solved.  For example, to connect the CH1 to Com0 (DMM +) and CH93 to Com4 (DMM), then take a measure, then connect CH38 and CH120 to the DMM, you would use the entry list of scan to the following address:

  CH1-> com0 & ch93-> com4; CH38-> com0 & ch120-> com4;

  Note You can have as an entry in list of switch module scan.  In addition, you can only have a single advanced analysis and a measure full per switch module.

• How can I use my camera and flash drive when I am told is not accessible?

  I tried to use the camera on my lenovo computer and a flash drive. When I Plug one... It tells me no access or is not accessible. When I got to load or transfer I had no right... After having click on everything I could... Then, I have used both... Unfortunately when I went to use it again after some time out, I was denied access. Sheherazade... Can anyone simply strolling through the fix?

  You say after clicking on everything but don't list all things accurate you linked.

  You must specify how you have tried to access these devices and keep them separately so that they are not intertwined or confused.

  The cameras are usually accessible by using import in a program photo editing that you have installed?

  Also the will of card sd removing also make this device listed as a flash drive.

  Flash drive are accessible and listed as a removable drive / mass storage designs,.

  Click the Start button and click computer.

  Flash drives also appear on the Navigation pane in your libraries from win-7 beneath the computer section near the bottom with a drive letter assigned to it.