How can I write a DVD blu - ray on a mac?

Similar Questions

• How can I play a dvd blue-ray on a Macbook with a great player?

  How can I play a dvd blue-ray on a Macbook pro with a great player?  I am running 10.11.5 of El Capitan on a MacBook Pro (retina, 15 inches, end of 2013).  The Superdrive rejects the dvd blue-ray.

  Super disks are not compatible with Blu Ray - you'll need to get a dedicated Blu Ray player

  Turn your Mac into the ultimate Blu - ray player | Macworld

• How can I use a Sony Blue Ray on my Macbook Pro

  I have a Sony Blue ray with HDMI and I wanted to watch a movie on my mac, but when I use my HDMI port on my computer, the device is an empty file and the video player cannot display the dvd player.  knows there are adapters for HDMI to love at first sight, but why can't I use my existing HDMI port of pre?

  Anyway, if someone could help that would be great.

  If you are looking to play Sony's Blu - Ray discs on your computer, you can not, as the laptop is not all video input ports.

  Leo

• How can I write double DVD with my DVD UJ 820 burner?

  Hello, I own a laptop satellite, and my problem is that she cannot write to double DVD, I think I should update the firmware but I can't find anything, recently I had the same problem with my desktop pc and to solve when I update the firmware of its own nec dvd burner Anyone know where I can find an update of the firmware or something to solve my problem?

  Hi Chris

  CD and DVD burning and playback with different readers are a never-ending story.
  I use an external burner and believe me; I tested more than 10 different media from different manufacturers.
  I could burn some media but not read and read but not burn :(
  I think you should also test different DVD.

  In my manual, I found a list with the CD and DVD compatible. Eventually, you will also find the same list of supported media in the pre-installed user manual you.

• How can I get my dvd player to play blu ray discs.

  The software plays fine other DVDs, but won't play Blu Ray. This is the Pavilion dv7 3165 with operating system Windows 7 Premium. I never succeeded with this problem and thought that he would solve with updates...

  Download Cyberlink Power DVD10 and save it to the desktop, not in a temporary folder

  http://FTP.HP.com/pub/SoftPaq/sp53001-53500/sp53029.ex

  After it's over, do a right click and go to properties and you should see what is in the screenshot.

  

  There has been many problems with software programs of virus blocking critical files in the player (s) Blu - ray. For the most part, disable the antivirus or programs was sufficient, but with McAfee, it had to be completely uninstalled. If at this point, uninstall your antivirus software, no matter what it is, and if there is a special tool required by the developer to uninstall properly, use their tool when it will exist. I know Norton and, possibly, Avira requires an uninstall tool.

  Once it is uninstalled restart your laptop and you will get the warning typical of Windows that the world will come to an end to crash, because you do not have an anti virus program on your computer. Just ignore it and continue with the installation of power DVD10, note that it is important that you stay connected to the internet, the software to install correctly. The link is directly from the view of HP it is has no viruses, Trojans etc attached.

  After it is done installing, restart your machine. This is important.

  After the restart, go to control panel, then Auto Play and make sure power DVD10 is chosen for Blu - ray discs, if it has not been chosen click the menu drop down and choose to do and save the setting. Restart your computer and go back to auto play and make sure that the setting has been saved.

  Then, open the drawer of the DVD/Blu-ray with the button on the front of the drawer itself and leave the charge for Blu - ray automatically with the opening of Cyberlink DVD 10

  At this point, you can reinstall your anti virus software if the drive Blu - ray continues to work then you will have to go into the advanced settings and find which files are blocked in the drive and let them. It's not always easy, so I advise to use ESET (not free) or Microsoft Security Essentials (free). I have used in the past and they never gave me any problems with my Blu - ray players.

• Im trying to read a DVD Blue-ray in my new computer laptop and a message saying "Windows Media Player cannot play the DVD.

  Original title: how do peripheral DVD player on my laptop

  Im trying to read a DVD Blue-ray in my new computer laptop and a message saying "Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support. and also tried to solve the problems and see them all, then clicked on reading and burning CD and blu - ray discs and message saying could not identify the problem. then I went to windows media dvd player and the message saying that "Windows has no dectet a dvd playback device, if you do not have a dvd playback device, you will need to purchase and install a.. "If do not have a DVD player installed, contact your OEM or device for the latest driver for your particular device" Please can someone help me as its driving me crazy. Thank you

  You must have a third-party program to run Blu - ray discs.

  http://www.arcsoft.com/TotalMedia-Theatre/

  http://www.CyberLink.com/products/PowerDVD/overview_en_US.html?&r=1

  Your new PC must have provided with software to play. Otherwise, I'd contact the manufacturer and see if she did or why it didn't.

• Satellite Pro M30: How can I write on a CD 900 MB?

  Hello
  How can I write on a CD 900 MB, I use nero 7 and nero on what they told me I have to update my firmware CD writer questioned. I got satalite pro M30 and windows XP SP2.

  Hello

  I found this firmware on the Toshiba driver page:
  http://support.toshiba-tro.de/Tools/updates/DVD-r-RW-firmware/SD-rxxxx/frmwre-na.zip

  But I m not 100% sure if it works.
  You can also try to search the FW on the driver page.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

• Qosmio G50-129 - can I have it with Blu - ray?

  I was looking for a laptop for a few weeks now and I fell on the Toshiba Qosmio G50-129. I had already seen the X 300 range, which had the quad processor, I prefer, but I did not like the colors of this laptop "boy racer".

  I thought that the G50 was a reasonable compromise - the high-end core 2 duo processor 800 GB of disk space and lots of features. Only two issues I have with this machine is the 32-bit version of Vista (why don't they provide 64-bit - I'll never understand this) and the lack of Blu - ray.

  Now, I'm not a fanatic of DVD or something else that I appreciate that the Blu - ray is the format that is there to stay. To this end, I have a small collection of DVD Blu - ray that I can play on my PS3 and my DVD Blu - ray player hooked up to my surround sound system.

  Can someone please explain to me why Toshiba produced this stunning notebook G50 - 129, but for A £1 499 it does not include a Blu - ray player? Are they crazy? I don't like that they have lost the race format by backing the wrong horse, I expect to get the Blu - ray on A £1. 5K laptop!

  Unfortunately, Toshiba you lost my business as a result of this omission. Too bad you didn't just accept that Blu - ray is here to stay and accept him as most of the other manufacturers.

  Hello

  As you know different notebooks from different manufacturers have different material combination.
  Is that Qosmio G50 doesn't support Blu - Ray player, but this machine has other benefits.

  It was equipped with the Toshiba Quad Core HD processor, that can turn ordinary DVDs in HD quality.
  So you can play DVDs using the internal player and you will get an almost the same quality as a Bluray drive.
  In this case you don't need to buy a new BluRay drive, but you can watch the DVD movies in HD quality!

  However, I searched here in the forum for similar and found issues these topics:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39557
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=139719

  It might be interesting for you.

  Finally, I must say that I would not buy a laptop just because of the Blu - Ray player.
  For me it s more interesting a CPU, graphics card, RAM, because these are the parts that are needed for games, multimedia, etc.
  Of course, the blue ray player would be a nice extra but I have a PS3 too and it was already fitted blue ray player

  If this player is not really necessary for me

  Welcome them
  Jimi

• HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  ---------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Dvd - Ram Gh80n not recognize the DVD blu - ray

  I am running windows 7 Home premium. My Hp Dvd - Ram Gh80n does not recognize a DVD blu-ray-this is store bought. I have tried several different dvds, & have read on different devices (IE: ps3, laptop, dvd player). Device Manager does not display any problem or updates available.  AutoPlay is enabled, didn't try a get command prompt reading disk a device not ready & state no media for the volume of the list. If I put in a blu - ray player NO I receive the news dvd with healthy state.

  I think that the reason that he will not read a blu - ray is because it is not a Blu - ray player.  Here are the specs:

  Basic specifications
  Product Description HP GH80N Super Multi - Tickets (±R DL) / DVD - RAM drive - Serial ATA
  Device Type drive (±R DL) / DVD-RAM drive
  Case type internal
  Black color
  Serial ATA interface
  Dimensions (Lxdxh) 14.6 cm x 17 cm x 4.1 cm
  Weight 0,8 kg
  Optical storage drive (±R DL) / DVD - RAM - 5.25 "x 1/2 H
  Read speed 48 x (CD) / 16 x (DVD)
  Write speed 48 x (CD) / 22 x (DVD±R) / 12 x (DVD-R DL) / 16 x (DVD + R DL)
  Rewrite speed 32 x (CD) / 6 x (DVD - RW) / 8 x (DVD + RW) / 12 x (DVD-RAM)
  Buffer of Protection against the fixed support Yes
  Certification Microsoft Compatible with Windows 7
  General
  Device Type drive (±R DL) / DVD-RAM drive
  Case type internal
  Black color
  Serial ATA interface
  14.6 cm wide
  Depth 17 cm
  4.1 cm height
  Weight 0,8 kg

• No longer autoplay video disks (DVD / Blu - Ray) (NOW RESOLVED)

  I use windows 7 Professional (x 64) and have this annoying bug.

  As of today, when I insert a Blu - Ray or DVD video disc, I get this error:

  "Windows cannot access the specified device, path or file.  May not permissions to access you the item. »

  I am the administrator of my PC and there is NO secondary accounts.  Guest account is disabled.

  There should be NO problem with permissions as I have full control of all my records and files.

  This only happens with video discs and not to other disks.  I tried Google, but have found no chance whatsoever.

  I can still access the files via windows Explorer, so I don't have access to the disk.  So why make this error instead of automatic reading I want to use.  When I insert a video disc, I want it automatically run my program of DVD/Blu-Ray and not spit this error at me.

  I had this problem last year and he only went after a reformat of my boot drive and a clean reinstall of windows.  I want do not undergo this nightmare again.

  Please help.

  I use windows 7 Professional (x 64) and have this annoying bug.

  As of today, when I insert a Blu - Ray or DVD video disc, I get this error:

  "Windows cannot access the specified device, path or file.  May not permissions to access you the item. »

  I am the administrator of my PC and there is NO secondary accounts.  Guest account is disabled.

  There should be NO problem with permissions as I have full control of all my records and files.

  This only happens with video discs and not to other disks.  I tried Google, but have found no chance whatsoever.

  I can still access the files via windows Explorer, so I don't have access to the disk.  So why make this error instead of automatic reading I want to use.  When I insert a video disc, I want it automatically run my program of DVD/Blu-Ray and not spit this error at me.

  I had this problem last year and he only went after a reformat of my boot drive and a clean reinstall of windows.  I want do not undergo this nightmare again.

  Please help.

  I have no fear to think, but I solved the problem myself seconds after this thread.  AutoPlay is borked and DVD and Blu - Ray discs have been set to open a program not belonging is not in movies.  I put the function Autoplay use Arcsoft TotalMedia 5 to open when you insert a movie DVD or Blu - Ray and all roses.  I will not close this thread in case other users with this issue of stüble on it and the solution works for them also that google gave no miracle for what actually solved this problem.

• Can anyone recommend a reliable blu ray software for use with a MacBook?

  Hello world

  I've been watching Blu - Ray software for Mac, but I thought I would check here first of all for the recommendations?

  Can anyone suggest a software reliable blu - ray.

  Thank you

  http://www.macblurayplayer.com/features.htm

• HP HPE337C answer DVD Blu - Ray?

  HPE337C answer DVD Blu - Ray?

  Yes, he does.  Once I passed this request, I found that he scored on the front of the multimedia disc tray.  I don't currently have all the Blu - Ray discs but you want to get one and give it a shot.

  Just finished watching "War horse" on the 27 "monitor.  It was not Blu - Ray, but as big screen, it was spectacular.  I have a Phillips DVR that I bought several years at Wal-Mart.  It will record TV on a 160GIG hard drive and burn a DVD of any program on the hard disk.  It is in the shop right now for the ejected disc repair.  I hope that it will be OK, because they aren't making them more and other manufacturers are about to phase out their units.  Sad

  Thanks for your reply.    PHIL

• How can I write a letter in french with Pages

  I use my computer in English, and I have to write an essay in french

  So, how can I write a letter in french with Pages

  Hi Luke,.

  If you are familiar with the French keyboard layout, you can move from the keyboard to this provision.

  If not, you can acess of the accents you will need the English KB layouts using (for example) option-~, then press e to e, or -e option, then press e to e. see the viewer keyboard for other options. Open the keyboard Viewer, and then press option key to display the keys to use for each accent.

  If all the accents you need are not available from an English keyboard, you can still list a French KB language as a 'second choice' and switch to it when you need an accented letter.

  

  

  

  Choice of the keyboard are defined in system preferences > language and text > input sources. If you choose more KB a page layout, the entry menu (a flag) will appear in your menu bar. The indicator shows the currently active KB.

  Kind regards

  Barry

• How can I play a dvd on a DVD data?

  Hello

  can someone tell me how can I play a dvd on a DVD data?

  Hello

  Which DVD Player did you? An internal drive for laptop DVD or a DVD player which is connected to the TV?
  What files you want that play you on the DVD player? Photos, Audio?
  As far as I know, you can use a burning software Nero. This software supports a lot of different modes of DVD burning. In addition, you should check what media DVD does support the drive.
  I burn my DVD with Nero photo and I can use this dvd in my DVD without any problem.

  Good bye