How can implement you not with Tim Capsule and AirPort their simulation on the iMac?

Similar Questions

• Can I start again with time capsule 2 TB existing using an existing iMac and a new iMac.

  Trying to understand several iMacs and Time Capsule.  Can I save a 2 iMacs on my Time Capsule?  I am running AutoCAD LT 1015 on my new iMac, so far, I've not put back up on my Time Capsule.  I'm worried it might be a problem with the existing backup tutorial AutoCAD on the Time Capsule, interfering with the new version purchased.  Therefore, I wonder if I can remove the Time Capsule saved since the original iMac info and start back up both machines it again?

  I wonder if I can remove the Time Capsule saved since the original iMac info and start back up both machines it again?

  Yes you can. The way simplest and quickest way to accomplish what you want is clear the Time Capsule disk and then start over again with a new backup of a Mac. Then, once it's over, make a new backup of the other Mac.

  When the two Macs have saved for the first time, then both will continue back up automatically and gradually.

• How can I get my xp computer that relates to the time capsule hard airport to connect to the internet

  My time capsule airport works to my iMac and my Sony laptop win7.

  I also have a windows xp computer that needs to connect to the internet while the airport time capsule hard cable . However, that xp computer seems not to recognize that the capsule exists and cannot connect to the internet. Can someone help me do this work? I'm not fluent in technical aspects of networks and connections. On the Sony, I just had to select the wireless network and put the password and everything was good. With the XP, nothing but problems.

  Help?

  Can your computer XP connect to Internet from other networks or simply not yours? From the description of your problem, looks like a configuration issue with your Windows XP computer and NOT the airport Time Capsule.

  Note: You do now that Microsoft does support Windows XP and that she would run as a potential security risk, especially when accessing Internet with it?

  However, if you still wish to pursue this, you can try the following to help you get started. You can post to a forum of Microsoft support for troubleshooting of networking with Windows XP problems.

  Step 1. Check your network configuration.

  To check the settings of network configuration for the correct IP address information, you can do the following:

  • In the command prompt window, type ipconfig/alland then press ENTER.
  • The results of this command will display a list of IPv4 default gateway addresses (this should be your Time Capsule) and DNS settings for all of your network interfaces (Ethernet, wireless, etc.) By default, your IPv4 address should be something like: 10.0.1.n.; the default gateway address should be: 10.0.1.1. The DNS addresses must match what your ISP provides you.
  • If you get an IPv4 address that begins with 169.n.n.n, then go to step 2 below.

  Step 2. Try to repair the connection.
  Network connection repair feature to renew the IPv4 network connection setting to try to correct the configuration on your Windows XP device issues. To access repair network connection, follow these steps:

  • Click Start, click Control Panel, and then double-click network connections.
  • Right click on the connection that you want to repair and then click Repair. Repair function will perform a number of steps automatically to try to fix the poorly configured settings for your network connection.

• How can I move pictures to time capsule

  I use a retina Macbook Pro with 256 KB of flash memory.  I approach a Time Capsule purchased and total storage capacity to increase storage.  How can I move photos of the capsule, or in the cloud?

  Do not move a library of photos to the TC... photos is designed to operate from a local disk or iCloud.

  Move the library to icloud, you should ask in the photos section.

  There is a lot of help documents to find out how.

  iCloud Photo library FAQ - Apple Support

  You can also move the library on a USB drive that you plug into the Mac.

  Still, there are a lot of instructions on it.

  How can I move my library of photos on an external drive?

  http://Apple.StackExchange.com/questions/183318/how-to-put-photos-app-main-Libra ry-on-an-external-disc

  If you move the photo library to the TC... it might work for a while, but because of the way the library is open when you change directly a file inside the library... If wireless fails, it can let the corrupt library... Some people ignore the problem... some people take care to use it for storage and run a small library for current materials on the Mac... and Exchange libraries... which is fine... as long as you don't change on the source of the network.

  Be warned... the photos are perhaps the most valuable items on your computer, once moved to the TC you have no backup and no way Time Machine can do backups of disks of backup network... so, if you're moving not the CT library... Please make continuous backups either manually... or knowing human frailty to buy a tool like carbon copy clone which is not limited like Time Machine for disks of local backup only. You will need to know where you're going for the backup of... but if it's a USB on your computer then you are simply running it the wrong way. The library must be on the local drive and backup on the TC as it was always intended to work.

• How can I find missing backups time capsule?

  Installation of El Capitan in September caused my incoming mail to stop after a certain point, although he showed millions of so-called items waiting to be downloaded. After many attempts of troubleshooting, I went with my last resort for fitness and do a clean install of El Capitan.

  When I went to my Time Capsule to restore my documents and applications showed none of my previous backups using the Star Wars. There are available dates in the timeline view, and the time Capsule shows my oldest as backup being December 1, 2015 after I ran the backup check, but I don't see anything beyond yesterday.

  Backups must be present on the Time Capsule, because it shows "tuberculosis 1.14 2 TB available." My sparsebundle (only 13.2 MB) indicated no mountable file system when I double click on it. It also has . tmp.sparsebundle as the extension. There is no other sparsebundle showing.

  I was looking for answers online and this forum and have yet to find a resolution. My first care in disk utility failed after a few hours, then immediately when I tried again. Any suggestions? Is it useful to fitness again? I did not choose the time Capsule to restore initially. I wanted to see if the mail would work before putting the time restore everything.

  Thank you

  Linda

  MacBook Pro (early 2011) El Capitan 10.11.3

  Time Machine, please press the shift-command-C key combination. The windshield will show the mounted volumes. All snapshots should now be accessible. Select the one you want and search for files to restore.

  If you need to restore from a backup of the hidden user library folder, first select a snapshot, and then press shift-command-G. A go to the folder dialog box opens. In this document, you enter the path to the folder. The dialog box will help you by automatically filling parts of the path when you start typing.

  The path starts with the slash character ("/"). Enter that. The rest of the parts is separated by slashes.

  The next part is the date and time of the current snapshot. Enter a '2', and the rest of the date should be filled in automatically. Press the right arrow key to access the end of the path. Enter a slash to start the next game.

  Next is the volume name (usually "Macintosh HD" unless you assigned a different name.) Start typing, then jump to the end and enter a slash.

  The next part is 'Users', followed by a slash.

  Then is your short user name. It is also the name of your home folder, which is represented by an icon of the House in the sidebar of a Finder window.

  Finally, enter "Library", and then press return. You should now be in the library folder. From there, you can move like in the Finder. You can also select another snapshot of the same folder.

• How can I regularly sign with an address and contact information?

  I used to sign my letters sent by mail or e-mail with details such as name, position, entity, address type header and coordinated details of phone numbers for fax number. Several different positions and roles and entities allowing me to indicate conveniently at this title, I was writing. How can Mozilla be set up to facilitate these approvals?

  Now, I realize that, perhaps, I have to overcome the annotation below "No file selected." This seems unnecessarily complicated for current affairs.

  I sincerely thank you.

  [Sensitive and personal information deleted.] Please do not post sensitive information, as well as please follow the guidelines and rules the Forum. [Thanks!]

  Try to go into the account settings. The home page (pictured below, image from another page in Support of Mozilla) has a "Manage identities" button on the lower right corner. This should allow you to add different identities, each with their specific signature, address, etc..

  I hope this helps.

• Extend the reach of the WiFi with airport Time Capsule and Airport Express

  I want to extend the range of my WiFi network running on a Time Capsule with an Airport Extreme airport. The Internet, ADSL, signal goes from the cable box in a closet and has two Ethernet cables connecting the box. I installed a simple Ethernet switch and ran inside, with both Internet cables Ethernet Miss and in two rooms in my apartment. I created the Capsule of time like the WiFi router, then the Express in the other room in Bridge Mode to extend the range of the WiFi network and enable AirPlay. This configuration works well for a while, but after a certain time has problems. The Express seems to go back to the creation of the WiFi network on its own and I saw the problem of the conflict addreses DCHP.

  What seemed to work correctly using the Express as the "pivot" and I fell straight Internet on it and an Ethernet cable to connect the Time Capsule in Bridge Mode. It's far from ideal for me, however, because I like the Express to be in another room to extend the range of the WiFi network in this part of my apartment and be able to use it for AirPlay.

  Help, please.

  If you could let us know what operating system you use on your Mac or PC, we'll give you a configuration suggested for the AirPort Express, which will allow the Express and the Time Capsule to connect to the Ethernet switch and perform correctly.

  We assume that the switch and the wiring will function properly in your current configuration, as well as the time Capsule, is that correct?

• How can I scan pictures with my c6180 and save on my computer?

  I'm trying to scan old photos of my hp C6180 all in one to my computer or a flash drive, but can't figure out how. It does not recognize the flash drive and does not give me the option to save on my computer.

  Hello dianalynn! Hope you do well;

  What operating system you are using?

  If you are using windows XP or later do this GO HERE  

  Let me know that if this answer to your question or the operating system you are using, I will do my best to help you.

  I hope this helps!

  RobertoR

  ▼ do not forget

• When I trouble shoot for why my printer is not working, it tells me that there are no drivers installed for my HP 6500 printer. How can I get one installed for her and where to check for the driver

  Our broken computer and we have relocated our software for our accounting program.  When we go to print, it does nothing.  Help out us and we were told that the printer, a 6500 Officejet from HP A doesn't have a driver.  How to get a driver on the computer it recognizes as one of the printer

  Hello Stephen,

  You can go to your printer manufacturer's Web site to download the driver for HP Officejet 6500 all-in-one printer from the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3795314&LC=en

  Select your operating system , and then click Next. Follow the prompt to choose either the full

  the function print driver or the basic copy, scan driver.

  Good luck.

• How can know you if someone has consulted and used the default Administrator account in Vista?

  I was not aware that the default Administrator account is so easily accessible if there is no password on it. In my view, a standard user has accessed this and it seems that the computer is having a lot of problems now. Is there a way to tell? Needless to say I care that much personal info could acceded as well as commercial information.  Security, 3 administartors (users) appears in some of the boxes, and I only know 2 of them, myself and the default admin?  I'm a recruit of the computer and the other person is somewhat a geek so I could really use some help. I am the system administrator, but don't really know what to look for. I would really appreciate if some wiz could help me.

  Thank you

  Hello

  You can't find if someone has consulted and used the default Administrator account in Vista. You will need to set up a password so that no one will be able to access the admin account.

• How can I access MSN with digital images and records of the captain.

  How can I downloan on vist MSA workikng with digital camera

  I HAVE VISTA PACK 2... How DO to DOWNLOAD or ACCESS MSN WORKS WITH DIGITAL PHOTOS AND WORKING WITH PIX FILES? JMCULPEPPER

  Hello

  For the different Forums for Windows Live Applications, select the link below

  Welcome to Windows Live Solution Center

  http://windowslivehelp.com/

• Airport Express, Time Capsule and Airport Express using the same network

  Just moved into a new House and this is what I install.  I have 7 Port wired into the House.

  Closet of network in the Garage:

  • Cable modem
  • Airport Express
  • netgear switch 8 ports
  • It works pretty well.  All my wired connections work fine.  Wireless is quite good but cove not enough of space in my house.

  Think about adding my airport express capsule of time in my office - plugged into one of the hard wired connections.  Who works AND let me wish the WIFI?

  Thank you!

  Yes fine, assuming that first test you the Ethernet port in the office by connecting a computer (with WIFI disabled on the computer) using a spare Ethernet cable runs to ensure that the computer can get a good connection in this way.

  Put the airport Time Capsule to create a wireless network that uses the exact same wireless network name and password in your existing network. Apple installation "Wizard" automatically configure airport Time Capsule in the correct setting of the Bridge Mode for the device.

• Time Capsule and Airport Express keeps disconnecting

  I have a problem setting up the network at home. I have a Time Capsule that is connected to a router Huawei, the Capsule is set to 'Create a wireless network' and router mode "Off (bridge mode).

  It was great to all workers and I get 2.4 Ghz and 5 GHz networks.

  Today, I bought an Airport Express so I can extend the wifi signal in the new section of the House, I tried to connect it to the time Capsule because 'Extend a wireless network' for a while, it would connect and everything seems fine and then begins the two TC & AE drop and reconnect again and let down once again , the led starts between green and amber shifts from time to time and keep doing that... The WiFi keeps fall signals and reconnect!

  I'm not sure what the problem... ! tried to set up two or three times but nothing seems to work. But once I turn off the AE, the TC begins works very well!

  Here is how my network configuration must be:

  Wall -> RJ11 >- Huawei -> Ethernet >- TC ... > WiFi >... AE 

  Note: when I connect the AE to transport CANADA the 1st time, this pattern was shown in Airport utility:

  Internet > TC > AE

  but it would be still lower, after the reset of the AE several times and tried to configure several times, now what I see is that both are connected to the Internet icon somehow!

  Any help!

  Begin by looking at the location of the AirPort Express to the TC Terminal. It is in the same room, another room or different floor? Another room or floor, if that it the basic construction building materials used in the walls or the ceiling in your home?

  What exact models are each of your base stations?

• How can I remove photos on my iPhone and iPad but keep on my iMac?

  I have an iPhone, iPad and iMac.  I take pictures on the iPhone and iPad.  How can I get my iMac on auto download and keep them on iMac but delete on iPhone or iPad.  I got it about 7 months ago, but some parameters need to be changed because when I delete on iPhone or iPad, it removes iMac as well.

  You have enabled iCloud photo library. It is what allows to synchronize all of your devices.

  Make sure that all your images are always in the Photos in full resolution. Then turn off iCPL and My Share Photo on all of your devices, including your Mac.

• How can I move my old TIme Capsule at the new Time Capsule backup files?

  For five years, I use a 2 TB TC. It is also the main router wired into my local network.

  Have the new TC even router feautures?

  If I buy the new TC I would like to transfer the backup files stored in the current TC. Is this possible? How?

  Thank you very much for your support.

  Beppe53

  1. Yes.

  2. click here and follow the instructions.

  (144542)