How can import you programmatically ics files?

My work used MS Exchange, and I like meetings of export business of ics files so that I can import them into the calendar from Apple to get the recall of them on my iPhone. Sometimes I get too busy and forget to check my personal email in order to import the ics file. This has led to more than a missed session I get enough deep my job of writing code, systems architecture, etc. So and if well, sometimes it takes employee leave for the day to remind me that I have to go home for the day, too!

Since my Mac at home is always online, I looked at using Dropbox/hazelnut instead of e-mail/applescript, but it seems that he is I have the same barrier - by program (i.e. non-interactively) import the ics file. I found snippets of Applescript that can work with some adjustments. The below a runs until the calendar app opens asking to specify the name of the calendar to import the event in. I need to manually answer the guest with cancel/ok right here. I change the calendar name setting window title parameter 'Add' and default home', but it's still stuck there.

dupCalName the value «»

the value path (path to the office as text) & "Personal.ics".

Tell application id "com.apple.iCal '.

activate

-Get the name of the application (probably 'iCal' or 'Calendar') for the GUI Scripting later.
Set iCalName to its name

-Since it is possible for more than one calendar to have the same name, the idea of the repeat loop is better than the simple name here references. But that one loop is necessary in this part of the script.
Repeat with i from 1 to the count of calendars

Set thisCalendar to i - calendar Gets an id to the calendar reference.
If (thisCalendar name is 'Personal') then

Set dupCalName to "Personal".

Set replacementName to "Personal (old).

Set the name to thisCalendar to replacementName

else if (thisCalendar is "Personal 2") then

Set dupCalName 'personal 2 '.

Set replacementName 'personal 2 (old) '.

Set the name to thisCalendar to replacementName

end if

end repeat

tell the end

delay 1

-"Double click" the file, because the Calendar iCal/s 'open' does not work in future versions.
Tell application "Finder" to open the file path

Tell application "system events".

say iCalName of process

-Hedge bets on the name of the window "Add an event" or "add events".
say (first window whose title begins with 'Add event')

Repeat until (if it exists)

delay of 0.2

end repeat

Click on the popup button 1

Repeat until (menu 1 pop up button 1 exists)

delay of 0.2

end repeat

Click on the menu "new calendar" menu 1 pop button 1 up

Repeat everything in (menu 1 pop up button 1 exists)

delay of 0.2

end repeat

Click on the OK"" button.

tell the end

tell the end

tell the end

-check if a 2 personal exist after the new iCal import and change its name
Tell application id "com.apple.iCal '.

activate

Repeat with i from 1 to the count of calendars

thisCalendar Set of calendar I have

If (thisCalendar name) is "Personal 2" then

Set the name to thisCalendar to "Personal".

output of repetition

end if

end repeat

tell the end

Tell application "SystemUIServer".

activate

If dupCalName is not "" then the screen of dialogue "Found an existing calendar named" & dupCalName & ".". It was renamed "& replacementName &". "buttons {"OK"} default to the 'OK' button with icon 2.

tell the end

I found importing ics files was something that I forgot to do it manually, so I came with a Hazel rule that uses the Apple script to automate it.

My Hazel applies to my Dropbox to 'follow' folder and my download folder. the ICS work/other files will happen through Dropbox, and those of my macbook, where the rule is executed, are saved in the folder downloads.

Hazel detects the ics file, run the applescript and finally moves the file to the trash folder. The script has reliably namely when the calendar app is done by importing the ics file, so I hardcoded a delay at the end of the script so far. Without the delay, Hazel will try to move the file before it has been imported. You will get an error message from the calendar app that it cannot process the file when this happens.  You may need to play late, if your system takes a long time to import the ics file.

Use case:

Many of my social networking sites allows you to export the events under ics file to import into your calendar. In addition, my employer uses MS Exchange to schedule meetings, and if you forward a meeting to your personal e-mail address, all in session sees. If instead, you export the ics meeting and import, your information is secure

[code]

property dittos: alias "Users:jgooch:Downloads:e1204988566180171.ics".

-"Double click" the file, because the Calendar iCal/s 'open' does not work in future versions.

Tell application id "com.apple.iCal '.

activate

-Get the name of the application (probably 'iCal' or 'Calendar') for the GUI Scripting later.

Set iCalName to its name

tell the end

Tell application "Finder" to open the file dittos

Tell application "system events".

say iCalName of process

-Hedge bets on the name of the window "Add an event" or "add events".

say (first window whose title begins with 'Add event')

Repeat until (if it exists)

delay of 0.2

end repeat

Click on the OK"" button.

tell the end

tell the end

tell the end

delay 2

Returns true

[/ code]

This works very well with Hazel and El Capitan.

Tags: Applications

Similar Questions

  • How can import you saved from a firefox Firefox another pswd

    I want to put all my saved pswd. on my desk in my new laptop to have to go to all the websites and the signing in, thank you.

    There is also the password exporter extension.

    https://addons.Mozilla.org/en-us/Firefox/addon/password-exporter/

    It allows you to export and import your saved passwords and disabled login hosts in password manager.

  • How can I recover a .ts file that will not import into Movie Maker? The .ts file works fine in Media Player... help

    How can I recover a .ts file that will not import into Movie Maker?   The .ts file works fine in Media Player... help

    Hi Stuart,

    We understand that you try to import a .ts file to Windows Movie Maker. However, Windows Movie Maker does not support this file type. You can click on the link below for more information on what file types are supported by Windows Movie Maker:

    Can what types of files I use in Movie Maker?

    Kind regards.

  • How big a file can I send with track and send? Is there a storage limit, to the extent where the number of files, you can download? How many times you send/download files are purged?

    How big a file can I send with track and send? Is there a storage limit, to the extent where the number of files, you can download? How many times you send/download files are purged?

    Hi pjvconsulting,

    There is no restriction on the number of files that you can send.

    However, for a free & buy account you cannot exceed a limit of 5 GB and 20 GB storage, respectively.

    The size of a file may not exceed 2 GB.

    Kind regards

    Nicos

  • When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Thank you for your help in advance

    When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Thank you for your help in advance

    You must set the source patch:

  • I just bought Elements 8 online. How can I get the exercise files? Thank you!

    I just bought Elements 8 online. How can I get the exercise files? Thank you!

    Do you mean the exercise files that are given with PSE8 box?

  • How can I check Auto .dbx files in My Documents. I have a lot

    How can I see the .dbx files in My Documents. I have a lot

    How can I see the .dbx files in My Documents. I have a lot

    You can not. DBX files contain e-mail messages and are read with Outlook Express. If you have a file with dbx files and included Folders.dbx, you can use the OE import function and import from a store directory.

    If Folders.dbx is not included, then you must import the manually.

    How to restore individual dbx files
    http://www.oehelp.com/backup.aspx#imp1

  • How can I recover all my files that I lost in an accident? I had to use my system recovery disk and install drivers for my computer again. I lost all my files. Is there something I can do?

    Help!  How can I recover all my files that I lost?  I was answering an e-mail message when I heard a couple of clicks then my computer off.

    I thought that my computer was destroyed.  Nothing I tried would bring it to the top, so I decided to use the system recovery disc that

    came with my computer.  I've also downloaded all the drivers for the application.  My computer is back on, but I lost everything.

    It's like putting into service with a new computer.  I had a lot of important information in the files that I lost.  I've tried everything I know to do

    without success.  Is it still possible to recover these lost files?  Thank you very much for your help!

    Hello

    I'm sorry, but when you did the recovery of the system you have disabled your hard drive of everything, including your files.

    You now have a new computer.

    You can try this program (it's free) to see if he 'can' find and recover your files. no guarantee:

    http://www.Piriform.com/Recuva

    See you soon.

  • How can I convert 16-bit files to 8-bit in 5 Lightroom?

    How can I convert 16-bit files to 8-bit in 5 Lightroom?

    You can actually convert a 16-bit image to 8-bit using Lightroom image. You can export a copy and make the copy an 8-bit image. Lightroom does not change the content of the image or makeup. The images that you import into Lightroom are kept in State of origin. But you can export copies in different configurations.

  • How can I dynamically load swc files using as3? (without relying on the Flash IDE).

    How can I dynamically load swc files using as3? (without relying on the Flash IDE).

    The SWF file can be used in the same way as the CFC, which means that you don't need to "visually show" anything when it is loaded. Your code can use the classes and assets incorporated into the SWF, just as a SWC file. So if someone just to load the SWF file to see what was in it that they see nothing. They could however access programmatically to what anyone on the inside just like you, if they went to that level. But it is not as easy as just racing as SWF to see what is inside.

    I hope that all packaging several separate sovereigns will allow you to load and unload only what you need to keep the RAM usage as low as possible with a minimum load SWF.

    If you are ready, please mark all useful/correct so we can filter without response. You're welcome and good luck!

  • How can I open a rar. file on mac?

    I got a file in rar format and unfortunately I can not open

    How can I open a rar. file on mac?

    Thank you for your support

    It must 'open' (UN-compress/extract) using the Nations United-archive by double-clicking

    http://appletoolbox.com/2015/10/how-to-extract-RAR-files-on-Mac-OSX/

    Where did this come from?

  • I am trying to view PDF documents, but when I click on them lots and lots of tabs keep appearing above I got 1000 s, how can I stop this and how can I watch a PDF file

    I received an email from my supplier of energy in it that I have to click the Bill to display, it downloads and asks me if I want to open it with internet explorer or another thing, if I click on firefox. There is no guard opening loads and loads of tabs on the top, I tried to close them at the last count I had managed to close more than 1,000 feet but still do not see my wife bill.my had the same thing that she tried to open a PDF file and you have the same problem of . Then how can see us without problem files we receive in emails, etc., and how can I get rid off the coast of this multipling the tab itself? Thank you

    The details of your system do not have a pdf reader. You have, for example, Adobe Reader or Foxit Reader?

  • How can I copy an .exe file of the winow downloads on my hard drive?

    the header is the question

    "How can I copy an .exe file of the winow downloads on my hard drive?

    If the file is always displayed in the Download Manager window, then you can use open folder on the shortcut menu. If this entry is grayed out then the file is no longer at this location to download. Possible causes are cleaning software or anti-virus that deleted the file.

  • How can I find a missing file

    How can I find a missing file for microsoft office 2010 which has been installed on the pc when I bought it. the file is: C:\ProgramData\Microsoft\OEMOffice14\0Starter\en-US\WelcomeDocument.dotx

    Hi starr456,

    This is something tricky, simply because the Starter is not available anywhere to download (it's the OPK only), and it is not available to resettle them in the HP Recovery Manager. After researching this for awhile, it seems to me that your only option to get Starter upward and the execution is to perform a recovery of the HP System. This restores all of the original software, including programs that are not available to resettle them in the Recovery Manager. He is also the 'nuclear option' and will completely erase everything on your computer. You will need to back up all personal files that you do not want to lose.

    If you're desperate for Office Starter, you can use this recovery method. But if you're open to exploring other alternatives, you might want to try a freeware productivity suite (like OpenOffice, for example).

    Here is a link to the instructions for performing a HP system recovery for Windows 7. If you have a different version of Windows, let me know and I'll post a different link.

  • I am a new player. How can I check my SD files?

    I am a new player. How can I check my SD files?

    Hello Alexban,

    I got a new customer (on the same network) and having the same problem as you. It took a bit of "Violin" to solve this one, but basically here's what you do: -.

    Your homescreen launch your application by clicking on the tab background Center tray can find quick Office and launch it. This will essentially ask you if you want to receive updates etc. and take you to a site Web etc (don't worry open office is not an online application, it is built into your phone). Away Web site, close the browser window by pressing the menu on the right key lower and then tapping on the exit button to end the browsing session.

    Once you do this, you will see a file indicating the memory card and another who says that recent documents. From there, you type just the memory card icon and you get a complete disassembly of all your files.

    I hope this helps, and if you get stuck again just post another message and I'll look out for it and try to explain another way.

    Good luck and best regards - Roy...

Maybe you are looking for