How can we change the start-up time in a virtual machine
I need to update the delay start for my virtual machines so that each time that the virtual machine is under voltage or reset, the boot order to 5000 milliseconds delay. The default is 0 milliseconds.
Can someone tell me what command (s) I need to use for this script. I only meed the correct syntax and I'll be able to write the script to change the default settings on all my VMs currents (I've already updated my model so that the new virtual machines have the value of 5000 milliseconds).
Any help would be greatly appreciated.
See you soon
IMMIAnt
To set the delay for all your vm is 5,000 milliseconds with PowerCLI you can use:
$spec = new-Object VMware.Vim.VirtualMachineConfigSpec
$spec.bootOptions = new-Object VMware.Vim.VirtualMachineBootOptions
$spec.bootOptions.bootDelay = 5000
Get - VM | {ForEach-Object
$_. ExtensionData.ReconfigVM_Task ($spec)
}
Tags: VMware
Similar Questions
-
How can I change the amount of time before a call to voicemail
How can I change the amount of time before a call to voicemail?
-alex-
You will need to contact your carrier and see if they can change. There is no setting on the phone, only the owner can modify it, if they can. Not all carriers cannot change, and even if they can, it's a very short period. This has to do with the configuration of the call. At least you know that it's all the time and not the number of ringtones.
-
How can I change the date and time on my HP officejet pro
How can I change the date and time on my HP Officejet pro?
I'll be gald to help you in this situation.
What officejet do you have?
You can go to the settings on the printer screen.
1. click on Setup
2. click on Preferences
3. choose the Date and time
-
Satellite Pro A10 - How can I change the start property?
Hello
How can I chance the A10 coastal boot?
With ESC, I can access the BIOS, but I can't chance anything except the time.Thank you
TobiasHello!
I think you should check the BIOS again because as far as I know, there you can change the boot priority.
In addition, you should find more options in the BIOS as only the Date and time.Check it!
Good bye
-
How can I change the starting point of a path?
It bothers me when I use brushes for a path shape/access line. Is there a function to change the starting point of race in the direction of the form/reverse of a path?
You won't need to duplicate the path. Just select it and then change the options for this object. There is a button in the Panel forms for this.
-
How can I get the number of disks for a virtual machine and PAHO are / s of a disc?
Hi all
I would like to know if there is a command that returns the number of disks having a virtual machine.
and also if there is no command to obtain and change the number of the IOPS / disk s.
Thanks in advance
Carlos
It will give you hard drives attached
Get - VM | Hard drive
It will give you count
Get - vm | Select name, @{N = "TotalHDD"; E={($_ | (Get-harddisk).count}}
It is possible to retrieve the number of the IOPS / disk s, but what do you mean by editing.
-
Basically, it's one of those things "If you have accidentally activated the computer." It is only the biggest annoyance of
since I was "keep" my computer after putting out of fashion 'sleep'. I usually have a certain pages open in firefox, and it does not record the sessions (together than on purpose, adult with children here who will use it from time to time if don't want them go on Web sites for the adult audience. No, I don't speak of stage I have other security measures at the UM, front. If I was here a few minutes agom, and I made the model of sleep. I put on a shirt and then see that the computer went to the screen "logout".
I expect the laser mouse usb 'start-up' (because it's not automatically, it is linked to a USB hub) and I have, like, two seconds to move it.
I need to change the time it will stay after start/waking up without interruption to the user before it stop, or turn off the feature altogether, and I do not know is not a 'problem', i.e., it was set in vista by microsoft, no viruses/errors/whatever.
Hello
Well, that has a lot of adjectives but not described is not the problem as well so here's my best guess.
1 I want to erase the General corruption and repair/replace damaged/missing system files:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------
Control Panel - Power Options - on left - require a password on Wakeup - do not require the value
a password (except if you wish to do this).Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
similar are not enabled.Shoot sleep problems - hibernation
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)All the default power plans and then set them as you wish. (Change Plan settings - Restore Defaults
for this Plan - SAVE - then go back and set their and advanced settings as you wish.)I hope that answers your question.
Rob - bicycle - Mark Twain said it is good. -
How to set the time it takes for my computer access mode standby, when I do not use it? Thank you.
Hi ILUVHAWAII,
Welcome to Microsoft Answers Forums.
By default, your computer goes to sleep after a short period of inactivity to save power. To keep the computer awake longer, increase the sleep after setting.
To keep your computer awake longer
1. open power Options by clicking the Start button, click Control Panel, clicking System and Maintenance, and then clicking power Options .
2. in the left pane, click change when the computer sleeps.
3. in the change for the plan of the parameters in the page computer standby list, click the amount of time slot on battery or AC (or both) and then click Save changes.Turn off a computer: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questionsSolve power problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problemsHalima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
How can you change the starting sequences oh Hp 6735 b, how can you get the Bios?
I tried to install another version of my windows vista interprise, I couldn't because I could not find how to boot from the CD/DVD?
I started the computer, pushed F1 there is no way to get the starting sequences...
I need help here
Hello
When you turn on the computer, you must quickly look at the bottom of the screen.
It should tell you right there what key press to enter the Bios/Setup
Here is the information from HP on how to enter the Bios/Setup.
"The Boot order in the system BIOS Setup.
The boot order configuration
The boot order can be configured on the Advanced tab in the BIOS Setup menu. The procedure for changing the boot order may vary according to the model of the computer.NOTE: BIOS configurations vary depending on the computer. For more information on a specific computer, refer to the documentation provided with your computer or visit HP drivers and downloads page . The BIOS settings are usually listed in the Guide of Service and Maintenance.Follow the steps below to configure the order of boot on most computers.- Turn on or restart the computer.
- While the display is clear, press the f10 key to enter in the settings menu of the BIOS.NOTE: the BIOS setting menu is accessible by pressing the "f2" or key f6 on some computers.
- Select the Advanced tab using the arrow keys left and right.
- Use top and down arrow keys to select the boot order .
- Follow the on-screen instructions to change the boot order.
See you soon.
-
How can I change the start menu to view all default programs?
I'm trying to figure out how to get all default loading programs in the start menu (rather than recent programs showing, we disabled). Y at - it a registry key that can be changed or created to do this?
I'm trying to figure out how to get all default loading programs in the start menu (rather than recent programs showing, we disabled). Y at - it a registry key that can be changed or created to do this?
Hello
There is no way to display the menu all programs when you click on the Start button. Start is similar to a toolbar. When you select it, it will show all the different components that you can access.
You can stop the recent programs to display. Right-click the Start button and select Properties. In the privacy section, Remove the check mark from the option store and display recently opened programs in the start menu .
I hope this helps.
Thank you for using Windows 7
Ronnie Vernon MVP -
How can I change the start view of a website to a mobile device?
I have a mobile version of a page on my site (SESSION TIMES) which, once seen on the top of the show from a mobile device as small as shown below
Is any way in which I can change something to show the section of the page that I actually got the information a mobile device as shown below
(The operation of the table on the side does not matter so much but just be able to choose a section to display when you go to the page)
If I have the right to the issue, then you must change
TO
-
How can I change the start page on the Sierra?
I'm not talking on the desktop or screen saver. I want to talk about the page that appears when you turn on your iMac or when you wake up. This is the page where you enter your password. Sierra that's so terrible ugly. Is there a way I can change it?
Select a picture - once you have your image to the right size and dimensions, save or export to your desktop as a PNG file and name it com.apple.desktop.admin.png.
Then, from the desktop, use Cmd-SHIFT-G hotkey to access the go to folder window, type the following path in the box and click OK.
/Library/Caches/
A new Finder window appears showing the contents of the path, and you will see a file called "com.apple.desktop.admin.png" in the folder. Make a copy of this file and store it as a backup if you wish (although we'll describe in a moment why it is not really necessary) and then drag and drop the version of the file that you created on your desktop to the folder Caches, agreeing to replace the existing file when you are prompted.
-
How can I change the start setting for creative cloud?
I bought licenses of one app for InDesign and Photoshop. I also want to understand the system load and performance related to the creative cloud. The Task Manager is not able to assess this. Is there a way to control the startup for Adobe applications?
I would appreciate your recommendations / technical feedback Adobe support.
Thank you.
Click on the settings (gear) icon > Preferences > General
-
How can I set the Script of customization for all virtual machines in a paralytic
By using the. ExtensionData method found here: http://communities.vmware.com/thread/392462?start=0 & tstart = 0 (thanks alanrenouf)
I am able to identify a few comments properties via PowerCLI adjustments.
My question is how to set the value of CustomizationScript with a client cust simple script?
Is it possible to store it in a $variable?
Sample script that I first:
off @echo
If "% 1" == "precustomization")
tasks precustomization echo
) ElseIf '%1% ' == 'postcustomization')
cmd /c schtasks.exe/change /TN "\Microsoft\Windows\Defrag\ScheduledDefrag" /Disable
)
Thanks for the help.
Answered by tests. It's the double quotes.
$civapp = get-CIVApp TEST
$script =
"@echo off".
If "" %1% "" is "" precustomization"")
tasks precustomization echo
) ElseIf "" %1% "" == "" postcustomization"")
cmd /c schtasks.exe/change /TN "" \Microsoft\Windows\Defrag\ScheduledDefrag"" /Disable
)"
Foreach ($civm to ($civApp |)) Get - CIVM)) {}
$GuestCustomization = $civm. ExtensionData.Section | Where {$_.} {GetType () - like "* GuestCustomizationSection"}
$GuestCustomization.Enabled = $true
$GuestCustomization.ChangeSid = $false
$GuestCustomization.ResetPasswordRequired = $false
$GuestCustomization.CustomizationScript = $script
$GuestCustomization.UpdateServerData)
}
Post edited by: jgreenback
-
When I first log on to windows xp if I'm not actively something minutes I logoff and must re-enter my ögon again. How can I change the length of time that it remains active?
You can find in Control Panel
Maybe you are looking for
-
Beep high permanently with Satellite C850
Hello! I bought a new C850 Satellite two weeks ago. Recently, he began with a horrible high beep that keeps beeping constantly.It is not my speakers because I disabled the...How can I stop this beep? Thank youLeftThe Netherlands
-
I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless. I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected. There is nothing I can do to Solutions of HP to recogni
-
not be connected to black white country page comes, cannot delete or move my MSN.
-
Windows Defender icon in the Notification area
Hello. Yes, I chose the "Always" button for the Windows Defender icon appear in the notification area. : o). OS: Windows Vista Home Premium SP2Internet browser: IE8.0.6001.18783Windows Defender Version: 1.1.1600.0Engine version: 1.1.4803.0Definition
-
Validity of message blackBerry Q10 Q10
Hello Could someone help me find the option update messages, text and mail, duration of validity (without end or number of days) Thanks for your help