How can you check if you have a problem with the ghost attack

Similar Questions

• How can I check if I have a virus in the BIOS and what is the difference between formatting and full format in Windows 7?

  Hello

  Recently I found a rootkit on my computer, especially rootkit.tdss.tdl4. Of after I read that I got one of the best!

  I have two questions:
  Firstly - how can I check if my BIOS was hit without blinking? I read that this Trojan horse could have started exactly from the BIOS, and very likely to stand again after doing a clean install. I have a laptop HP seems like flashing procedures require to disconnect the disk hard - is this true for laptops?

  Second, is how I format to ensure that clean the MBR? I have Vista and want to upgrade to Windows 7. I have Windows 7 upgrade ultimate disc that can do a custom install which should format entirely. Tell me if I think too old school here but should be low (or zero) format is required? From what I've read, the function of full format of Windows 7 should be as powerful as the low level. is that correct? I don't mind the overtime work as long as I don't have any problems (at least with this Trojan) later. I also fear that upgrading Windows 7 disk might not have all the features of formatting as a full version, which is a nonsense?

  Thank you very much for your help!

  (Tdsskiller Rootkit removal tool)

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  In addition, suggest that you scan your computer with MalwareBytes' to remove all traces that may still be present.

  MalwareBytes Anti-Malware (MBAM)

  http://www.Malwarebytes.com/>

  The free version of MBAM is a scanner at the request and offer no protection "real time". Keep and use it as "second opinion" scan.

  Windows 7 tools to format the drive should be sufficient:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• Hi you have a problem with the final installation with adobe elements first 13

  you have a pc windows 7 home premium 64-bit OS 6 GB of Ram

  an error message appears that says

  exit code 7

  the final installation stops at 2% and then I get this message

  I think I need to download the 64-bit software

  Help, please

  Exit code: 6, Exit Code: 7 Installation errors.

  http://helpx.Adobe.com/Creative-Suite/KB/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6-

  http://helpx.Adobe.com/Creative-Suite/KB/troubleshoot-install-logs-CS5-CS5.html

  For more information on how to review your Setup logs

• Satellite Pro L20-someone ' one can tell me if I have a problem with the screen?

  Hello

  I have a Pro L20 - PSL25E and I recently had problems with the screen, it was intermittently flickering/lose color and whiting almost (when the color fades white vertical lines begin to appear).
  This seemed to worsen after that I dropped it (only from about 2 feet off the ground, not a big drop).

  I thought that the sceen can go, but the performance of the laptop seems to be affected when this happens, the laptop started to run very slow (tracks mouse slowly, programs I clicked take ages to run and it freezes sometimes to stop flashing) that had me thinking that it might be a virus or performance problem.

  My screen, drivers are updated, I did a full scan with McAfee, ran a clear-up system and a Defrag.

  I was wondering if anyone knew if it seemed to be a problem with the connections of the screen and would need replacement or if it could be repaired or if it were a performance problem?

  Any help would be great thank you appreciate!
  Rebecca.

  Looks like the graphics chip has a problem, which I think is a motherboard replacement.

  You can get a quote for repair to an authorized service provider. There is a list of ASP on the Toshiba site.

• you have a problem with the Access screen reader

  I went to the creation, there was a developer option after clicking on the place where there is another switch called accessibility screen reader. as soon as I clicked my touchscreen phone got locked.
  I do not understand how to open it.
  Help, please

  Hello, this blog helps you recover?
  http://opendirective.net/blog/2014/05/help-i-bricked-my-Firefox-OS-1-3-device-by-enabling-the-accessibility-screen-reader/

• I have a problem with the cursor on the computer.

  Original title: How can I stop this? When I click on a window to make it active, he admits that as a real click click and move the cursor on the page. Windows 7 pro

  Windows 7 pro 6.1

  I do web development on several screens with multiple applications open at the same time.  When I want to use a program that is on my second monitor I click it to make it active.  This click has also acts as a true clicks and moves the cursor on the page.  This can be very annoying because whenever I want to spend the programs I mouse over a sidebar of this application or try to click exactly where my cursor is in the document.

  Looks like a trivial question, but through the course of a day it gets very boring very quickly.  I don't remember that it works this way in older versions of windows, and I hope that there is a way to fix it.  What I would like is the first click on an app just make active in order to quickly click the apllication anywhere and start typing there where I left.

  Hi Vanamp,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with the click of the mouse to activate a window.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.

  This problem occurs only with a particular application?

  This problem can occur if the mouse settings are poorly positioned.

  I suggest you try the procedure described in the article and see if it helps.

  Change the settings of the mouse
  http://Windows.Microsoft.com/is-is/Windows7/change-mouse-settings

  Check out the link for more information.

  Make the mouse easier to use
  http://Windows.Microsoft.com/en-in/Windows7/make-the-mouse-easier-to-use

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with the mouse settings, I'll be happy to help you. We, at tender Microsoft to excellence.

• I have a problem with the HP Deskjet2545 do not print on the computer.

  Printer does not print. Computer says "printer error". Convenience store said that the problem is resolved. The printer is 'ready' doesnot even impression. What is the solution?

  Original title: hpDeskjet2545.

  Hi Matt,

  Thanks for posting your query in the Microsoft Community.

  Printers to print documents, photos, cards and calendars. You have a problem with the printer doesn't work is not on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what is the exact error message?

  (2) have you tried the troubleshooting steps?

  (3) what is the version of Windows installed on the computer?

  (4) have you made changes on the computer before the show?

  I would like more information about the issue.

  Note: assuming that you are running Windows 7, I would like to suggest some troubleshooting steps.

  Method 1-

  I would have you look at the article-

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2-

  I wish that you uninstall and reinstall the printer.

  See the article-

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Method 3-

  I would have you go through the troubleshooting proposed by HP guide.

  Check out the link-

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3571292

  Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• I have a problem with the DVD drive not detected on Windows 7.

  I built a new PC (I've built a few of them).  This time is not considered my ASUS BD player with Windows 7 DVD burner.  It is not in either Device Manager just do not at all recognized.  The BIOS for the ASUS P9X79 of luxury see the SATA drive without problem.  Sometimes after restarting the BD Player looks and functions perfectly, but when the computer goes to sleep or shuts down is usually not there when it is restarted.  Please help me solve this problem :-)

  Original title: optical drive not recognized...

  Hello

  Please contact the Microsoft Community.

  You have a problem with the driver DVD being missing on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) that you get an error message or error code?

  (2) did you have performed the steps in troubleshooting?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  I wish that you are running the fixit-

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  Back up the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I would have you look at the article-

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116#top

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• I have a problem with the Narrator, repeating words and phrases.

  original title: NARRATOR in WIN7 SUPPORT

  I use windows7.  The annoying Narrator sometimes voices repeat words and phrases.  I also need help, change of voice and using Narrator to read aloud my text book I downloaded.  It is in PDF format.

  Original title: Narrator sometimes repeat words and phrases

  Hello

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the Narrator, repeat words and phrases. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) exactly where you run the Narrator?

  (2) the Narrator extends from a particular document?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method-

  I wish that return you the items for assistance-

  Narrator doesn't read what I expect him

  http://Windows.Microsoft.com/en-us/Windows7/Narrator-doesn

  Hear text read aloud with Narrator

  http://Windows.Microsoft.com/en-us/Windows7/hear-text-read-aloud-with-Narrator

  Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• How can I check if I have a 32 or 64-bit processor? Compatible with the 32 bit processor 64 bit operating system?

  How can I check if I have a 32 or 64-bit processor? Compatible with the 32 bit processor 64 bit operating system?

  operating system 64-bit to 32-bit operating system, it's because the processor went from 32 bit to 64 bit?

  I know that 64-bit is faster and more efficient than the 32-bit processor, but why os 32/64 bit too? OS working elbow-to-elbow with processors?

  Could someone explain a little bit. I so want to know. Thank you

  (1) how can I check if I have a 32 or 64-bit processor? Compatible with the 32 bit processor 64 bit operating system?

  (1) os 64-bit to 32-bit operating system, it's because the processor went from 32 bit to 64 bit?

  (3) I know 64-bit is faster and more efficient than the 32-bit processor, but why os 32/64 bit too? OS working elbow-to-elbow with processors?

  (1) If you have an Intel processor, check here: http://ark.intel.com/ (all news are 64-bit, but many in the pentium and celeron series are not)
  No matter what AMD processor once sempron will be 64-bit.

  (2) No. 32-bit operating systems were once popular is that 32-bit processors cannot run 64-bit operating systems (although the 64-bit processors can run 32-bit operating systems.

  (3) see above. The only drawback to a 32 bit OS is that you can not use more than 3.3 GB of RAM, or to run 64-bit applications.

  teengeek.freehostingcloud.com

• I have a problem with the key, I aktivate Photoshop CS 6 after buying fo little years. But the drive hard ist crasht a moment the aktivate display the error. Please you can reset the key?

  I have a problem with
  the key, I have aktivate Photoshop CS 6 after buying fo little years. But the
  Drive hard ist crasht a moment the aktivate display the error. Please you can reset the
  key?

  Hi berndp3095653,

  Greetings.

  You must contact the customer as some changes to do on the backend

  Contact the customer service

  Concerning

  Rohit

• How can you find a timecode for the chronology of the hand... in the nested sequence?

  How can you find a timecode for the chronology of the hand... in the nested sequence?

  The opposite seems easy, but I often put the CTI on the main timeline in the hope of finding the exact location of the nested sequence.

  Thanks for all the ideas.

  It is CS3 help, but that's what you're looking for?

• Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?

  Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?

  haben

  Looking at the specs of your camera (SJCam 4000), we already know what video compression your camera uses. It is H.264.

  A H.264.mov file should be accompanied by a first elements 11. On what computer operating system is your first items 11 running?

  You have the latest version of QuickTime installed on your computer? And, you use QuickTime and first of 11 elements of a

  Account user with administrative privileges? Please go to Premiere elements 11 publish + share/computer/QuickTime to confirm that you will find

  presets it to the choice of QuickTime, it.

  What are the properties of these files H.264.mov - is it 1080 p (1920 x 1080 p 30) 30 or something else? Do you know if this device is registering with a variable or

  a constant rate?

  Please check and review and then we'll decide what next.

  Thank you.

  RTA

• HP spectrum XT Ultrabook 13-2003tu you have any problem in the material?

  It is always closed, and I don't know why? I troubleshooting and can't find anything.

  And he also has this problem. How can I solve this problem?

  
  

   

  Hi MouseHunter,

  I understand that you have a problem with HP spectrum XT Ultrabook 13-2003tu. The best thing to do is a system restore. You can restore to the last time where he worked.

  http://support.HP.com/us-en/document/c01835735

  Here is a document on overheating. Overheating could cause the computer to stay close.

  http://support.HP.com/us-en/document/c01657439

  I hope this helps.

  Thank you.

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW