How configure I pad to use my printer wifi

Similar Questions

• HP laserjet pro M1536dnf wireless configuration in order to use Air printing

  Since I am trying to print from my new Ipad Air, excuse my newbie questions for networking printing!

  What I know so far:

  1. I understand my printer HP laserjet pro M1536dnf is 'not' a WiFi printer.

  2 by HP support and Apple Support web sites, my printer HP laserjet pro M1536dnf is 'Air Print' active. I guess that a certain update must incorporated the Betacam Air Print!

  3. According to the web site of the HP Support, I have currently the latest firmware installed (20130815).

  Note: On my Config report, it shows the status for IPv4 and IPv6 as "network cable unplugged". I have the address IP Show as active.

  3. my home configuration has the internet cable from my modem cable to my router wireless Linkys E3200 via a coaxial cable. Between my router and my computer is connected through the Ethernet cable. My printer HP Laserjet 1536dnf printer is connected to my computer via a USB cable.

  Issues related to the:

  1. go to after I saw and read about on-line, is correct to say "I'll have to change my Ethernet cable from the router to the computer and change it to leave the router to the Ethernet port on the printer?"

  2. do I have to remove the USB from the printer to the computer?

  3. by removing the USB cable between the printer and the computer, how my computer would communicate to the printer to perform a print job? Unless, I suppose, I add another Ethernet cable between the router and the ethernet port on my computer!

  4 other advice, I might have missed?

  @RicharddR

  Thanks for your post on the forums of hp.com. Here are answers to your specific questions:

  1. you must have all your devices on the same cable modem network: computer, printer, mobile devices. Looks like your Setup is similar to mine. I have mine with the modem installation cable to my Cisco router that broadcast wireless signal. Then I have my devices on this router (computer, printer, mobile devices).

  2. If you use Airprint, you put your printer on a network or wireless. Since your printer is a model of dnf (D - duplex, n = network, f = fax), you must use a network cable and add it to your router. AirPrint is not supported via the USB port.

  3. If you remove the USB cable between the printer and the computer, you need to add your computer to the same network as your added to the printer. You can either do this via the ethernet cable or wireless depending on the capacities of the router and the computer. The important thing is that all the devices are on the same network.

  4. for other tips: make sure everything (computer, printer, router, mobile devices, etc.) are on the same network, otherwise you will not be able to print or have communication problems such as print jobs do not print.

  Good luck.

• How to set 2 pc using the printer wireless?

  I use an HP laptop and a printer HP Envy connected via wireless, how I configured to use a second workbook use the printer?

  Just install the same software and drivers again and you're good to go.

• How can I get networked computers running XP in order to use a printer that is connected to a computer that is running 7?

  How networked computers running XP home can use a printer (hp laserjet 3030) which is connected to a computer that is running 7 pro 64-bit?

  Seems there is a driver problem but I downloaded the driver several times and no luck. Telling me the wrong driver is installed.

  Firewall is also disabled.

  Printer is shared.

  I am far from a networker, so lame mans terms = please) thanks

  Hello

  These should help:

  Share files and printers between Windows 7 and XP
  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/

  Configuration network host connection windows 7, xp and vista
  http://Techblissonline.com/home-network-setup-connecting-Windows-7-XP-and-Vista/

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  =========================================

  More help at these locations: (Vista references also apply to Windows 7)

  Vista - LAN
  http://www.onecomputerguy.com/Networking/vista_network.htm

  Vista network and sharing Center
  http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htm

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I PERMANENTLY change the default printer to Adobe PDF files using my physical printer instead of SIMPLY printing a pdf in a new PDF file?

  Whenever I restart Adobe Reader DC default printer is automatically reset to print any PDF file to the "print to PDF file" as the default printer.  How can I change the "default printer" always default to be my physical default printer, instead of "print of PDF?»»»

  PRINTING a document which is already a pdf file to a pdf file is absolutely ridiculous and stupid for the following reasons:

  1. If you want to save a document that is already a pdf in different PDF file, you can use the function "Save as" in the file menu.
  2. If the user select "Print" to PRINT a file they ther NOT try to SAVE a file.  (We'll give credit to the average user to understand the difference between PRINTING and SAVING of a document).
  3. Most of the users do not need to duplicate the storage of a document on their drives to computer
  4. Users of mobile devices, by the fact that they have already downloaded the PDF file have already used storage space of EXTREMELY valuable and LIMITED memory with the download of origin and most certainly so NOT to use more than this space such a resource limited printing!

  As an engineer, hardware and software for the past 40 + years to really understand the value of making easy allow the end user to change the configuration of something as simple as the setting for the default printing device to use!

  For the record, I searched the online help as well as the forum Adobe Reader community for a thread that explains how to change the printer by default so that whenever I starts the Adobe service it will automatically use the printer default physical connected to my computer to "PRINT" any PDF document.  If I missed something that deals with this problem please point me about it, if no such band rolling exists, then please tell me before making this change.

  Thank you for your help in this matter!

  Sincerely,

  Larry A. Coates

  Hi larryc57256426,

  You can set your default printer following the steps mentioned in this document KB change the default system printer.

  Check in the print dialog box, you have unchecked "print to file" under "Advanced settings."

  Kind regards
  Nicos

• How to use the Print Screen function?

  I've seen various descriptions of how to use the print screen function.

  It would be nice to actually tell one that works.  None have worked for me.

  [Fn] and Prt SCr does not work.

  CTRL and Prt SCr does not work.

  CTRL, Alt, and Prt SCr does not work.

  [Fn], Ctrl and Prt SCr does not work.

  If anyone knows the correct method to activate the screen capture function which would be a good thing.

  From the looks of things, HP has a big problem with this function.

  Here's a microsoft articleon the use of the screenshot function.

  This should answer your questions.

  Thanks for taking a peek.

• HP Deskjet Ink Advantage 4645: how to use ink printer of Dubai in SG

  How to use my printer who had bought from Dubai to Singapore.

  Could not find the ink cartridge of in SG.

  Here's my printer model

  Printer e-all-in-one-HP Deskjet Ink Advantage 4645

  not produce is as below

  B4L10C

  INK CARTRIDGE NO. 650

  Hello

  Singapore (Asia Pacific), it uses 678. Now, please follow the instructions below to call HP and they will tell you how to reset it with a secret code:

  http://support.HP.com/us-en/document/c02558798

  Kind regards.

• How to open a pdf and read/print using Microsoft Works file?

  Error message: Works cannot open "C:\Users\Desktop\Zeke's Menu.pdf.  The file may be in use by another application, the file format is not supported by any of the installed converters or the file may be corrupt.

  How to open this file and read/print using Microsoft Works or Notepad or something else?

  You can't with these programs - (there is no same Modules for these programs) - you need another program.  You must download the free Acrobat Reader http://www.adobe.com/products/reader/ allowing you to read and print PDF files (but you will not be able to edit/modify them with this program).

  To edit/change you need another program like free PDF Editor: http://www.freedownloadscenter.com/Business/MS_Office_Add-ins/Free_PDF_Editor.html.  You can also download the free OpenOffice Suite 3.2 http://www.openoffice.org/ which is capable to download and work with PDF files (via the writer program).  The good thing about OpenOffice is that you can then save the file in another format which CAN be read and used by Microsoft Works or Notepad (even though it may look very different without the features of PDF).  OpenOffice is very similar to Microsoft Office and most of the people who do not want to pay for Microsoft Office get OpenOffice instead because it is by far the best alternative (and some say that it is even better - although I don't agree with that).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to change preferences for HP envy printer 4500 using Google Chromebook HP pavilion 14

  I want to know how to change preferences for HP envy printer 4500 using Google Chromebook HP pavilion 14?

  Hi chefcorbin,

  Welcome to the HP Support forums.  I understand you want to learn how to change the printer using your Chromebook preferences.

  I've included a link to Google support to print a page with chrome and lists the print settings that you can adjust.

  Google Chrome Help Center - print a Page

• How to install an hp LaserJet 1010 printer using the format of Windows 7?

  How to install an hp LaserJet 1010 printer using the format of Windows 7?

  Hello

   
  The hp LaserJet 1010 printer is not compatible with Windows 7. Visit the following links of Microsoft and hp for more information on this.
   
  Microsoft link
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-GB/search.aspx?type=hardware&s=HP%20LaserJet%201010%20&sort=ProductNameAsc&l=en-us
   
  link HP
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=306507&lang=en&cc=us&prodTypeId=18972&prodSeriesId=306505&TaskID=135
   
  To work around the problem, you can try the following steps, however this may or may not help solve the problem.
   
  Install the drivers for HP 3050 and check. Follow the steps mentioned.
  a.Go devices and printers.
  b. Add a printer.

  c. Add a local printer
  d. use an existing port - for example DOT4 001
  e. choose HP 3050's driver in the list and install it.

• On Windows 8, by default, OneNote when I try to use the print option. How do I set printer as default and not in OneNote?

  When I try to use the print option. How do I set printer as default and not in OneNote? Also, when I want to print from a web page (on the Web page printing option) it goes to OneNote and not print. I have also pulled up a file saved in OneNote and selected the print option in the Menu. I selected a specific page and is nevertheless not print?

  Because your message is off-topic in the comment forum, I moved it to the forum Windows 8 "Performance and Maintenance", where it is more on the subject.

  As you watch the start page, type "default printer".  A list appears on the right side of the screen.  Tap 'settings' and 'Change the default printer' will appear on the left.  Tap it.  Your devices folder and printers opens on the desktop.  You will see that "Send to OneNote" will have a green check mark next to it.  Right click on the printer, if you have already installed it, then select "Set as default".  Close the folder.  Therefore, when printing, your printer will be the default device.

  If you have not yet installed a printer, make sure you download the latest driver for 8 compatible of Windows to the web site of the manufacturer and install the driver following the instructions of the manufacturer.  Then set the default device.

• How to save a PDF file without printing pads production marks (red outline)?

  Adobe Acrobat DC, creative cloud

  Operating system Mac OS X Version of El Capitan 10.11.5

  16GB 1600 MHz DDR3 memory

  Graphics AMD Radeon R9 M290X 2048 MB

  • I did recently use of print tools Production in Acrobat when fussing over a PDF file that has problems at the printer. I didn't select (click on) the Print Production tool. Now EVERY pdf I save since InDesign has the red outline of the area of toppings on it and I want to not only visible usually.
  • I tried to check the options in InDesign and sought how to deselect this option without result.

  I post a screenshot below shows the contours in the PDF file so that you can see what I mean.

  Help, please!

  Many thanks in advance,

  Sally

  

  Hello.

  This isn't a question of InDesign: you ask Acrobat to display 'boxes', so he does.

  In Acrobat, go to Preferences: display: Show ArtBox, TrimBox, etc. (uncheck the box).

  Or, open the output preview window, you will find the same box in the preferences (I suppose that you activate it from there).

  But keep in mind that in any case the red line does not exist and cannot be printed, it is simply a programme of assistance.

• How to use Window.Print button attributes

  Hello
  
  I want to print a report using an impression button.so I use the function Window.Print in button attributes. But pop print screen doesn't pop up. How to use Window.Print button attributes.
  
  
  Thank you
  Maury

  Maury,

  The value target button in the form of URL and put after js for target URL

  javascript:window.print();
  

  see you soon,
  Hari

• How can you increase/change the font size using window.print

  We use no BI/XML Publisher.
  I have a button with a redirect URL to print.
  JavaScript:Window.Print();
  
  How can I give the user the possibility to print with a different font or larger or possibly put the same for everyone?
  
  Thank you
  
  John

  Hi John,.

  You can add styles that are only used when printing (or print preview). In the frame header HTML on your page (or in the header section of the page template if you want on all pages), add something like:

  <style type="text/css" media="print">
  * {font-size:24px!important;}
  </style>
  

  This will set all the text to 24 px. Obviously, adjust according to your needs.

  Andy

• When I use the printer icon in Firefox, it is pre-set to 10 copies. How can I change this default single copy. Thanks for any information

  When I use the printer, in the upper left corner icon, it is automatically preset to 10 copies. I want only default copy. I can change it to one, but when opened, he's back to 10.

  Number of copies to print is not a parameter that Firefox is supposed to be saving, and I've never seen a preference for this in Firefox preferences panel hidden - about: config.

  Try of the reset described here and reset all the preferences for this printer:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer
  Be sure to restart Firefox before you see if doing this reset solved your problem.

  If it solves your problem, please click the button solved it next to the answer that meets or solved your problem of Firefox support, it appears when you are connected, so this thread is marked as solved to help other users who may have this same problem.

  If that does not solve your problem, and defaults to always print 10 copies of everything through Firefox, please open help > troubleshooting... information and use the copy to the Clipboard and then paste this information into the box post an answer here.

  It's going to be a real long list, but all that I really need to see is the printing preferences, so you could paste all the information in a program such as WordPad text first, change the information that I can't see and then copy the remaining information and Paste only the information in the box to answer here.

  I wonder if there might be a pref I've ever seen, but I really doubt it. "Number of copies to print" has never been "stuck" for me on any program in Windows, on any PC I've ever used with any printer / print drivers.

  The only time I've ever seen a default "print dialog box" more than 1 copy has been with a working application where the program has been to force 2 copies of specific forms to print 2 copies all the time--one to give to the "subscribed" at the end of employment for their documents to the service call and one for the 'employee' obtain a signature at the end of employment with a fax in the Home Office for documentation of the task as completed successfully and for the purposes of the payroll while they would have paid for this service call.