How configure the list the Windows 7 firewall exceptions to allow the blocked IP?

Similar Questions

• Windows 7 firewall rule to allow only a predefined range of LAN IP Communications?

  Hello

  I'm new to working with the Windows 7 firewall.  I want to create rules that will help my office computers laptops only can communicate with some computers on my LAN - those whose IP address of 192.168.10.50 to 192.168.10.55.

  When comments computers connect to the network via ethernet, they would get an IP address outside this range and I don't want the hosts to be able to see or communicate with desktop computers and vice versa.

  I created the inbound rules and outbound for tests that denies everything outside this range of IP (extended tab has the range specified in the remote zone "IP address") and it seems to work.  For the "local IP address" I chose "any IP address" - the documentation says: "select this option to specify that the rule matches a packet network for any address as the local IP address. The local computer are always consistent with the rule when this option is selected. »

  Have I set it up properly?

  Thank you.

  Hi Sysadmin,

  Thanks for choosing Microsoft Community! However, the question you posted would be better on the TechNet forums. Please post the question here:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• The Windows 7 firewall exceptions

  A month ago, a new exception appeared on my firewall, BiuHTTP. He opens a portal through my firewall. I tried to remove it by using the remove firewall. At startup, it reappears. I tried to remove it using advanced settings, same result. I created a new inbound and outbound rule blocking this portal (I hope). I think it's me system32/wow as an exe program, but I'm not sure. I searched online and found gibberish. Anyone know what it is and how to remove it?

  Appreciate the help, but even that could not find. Eventally, I figured out how to use anvirus taskmanager to find the gate number and then give me a description. BIU means a Nero Backitup program. I uninstalled Nero Back up and then delete the firewall permanently exception.

  Once again, thank you, Jim

• How configure the USB camera that is not image Directshow

  Hello

  I use NEITHER-IMAQ for USB to retrieve videos from DVC170 of Pinnacle's Dazzle. There is an error indicating the system error, see the attached file. Someone has replied that it is because my USB device isn't a directshow image. In fact, Dazzle DVC 170 connects camcorders with computer. He got out Svideo connection camcorder and a USB port, computer connection. In this case, VISA can be used to configure USB and take video? Thank you.

  Hi HxL,

  Of course, you can do the programming activex using your labview package. For more details, go through the examples.

  Thank you and best regards,

  srikrishnaNF

• How configure MARCH to interpreter windows event and sending email

  Someone knows how to set up a MARCH to interpret a newspaper determined in windows events? The server is already configured in the March and events are stored in MARCH, I want to say MARCH "when you see an event with the XXX text, please send email to [email protected]" / * /".

  Thank you

  Of course, create a rule to control of a key word in the offset. Once you have tested, add a notification action. The notification are not sent to the event, just a link to the incident.

• How to configure the Windows Vista Firewall default

  How can I configure the default windows firewall

  Hello

  If you use a 3rd part firewall uninstall it

  or if you are using an internet security suite that includes a firewall, disable/turn off the firewall

  then that;

  1. Open Windows Firewall by clicking on the button start , clicking Control Panel, clicking Security and then click Windows Firewall.

  2. Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click on (recommended) and then click OK

  and you should have only ONE firewall running

  more than ONE firewall running can cause blockages of the system, etc.

• When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network.

  Unable to connect because of firewall or something, not true of course

  When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network and if I wanted windows to set up the connection, I need to start the firewall/ICS internet service (ICS) service and then he asks me if I want to start now then I say yes , but then it just tells me that it can't because the assoiciated service is not running, can anyone help please.

  Hello

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  Also read these articles and check:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702/en-us?p=1

• There are no programs listed in the exception list allow programs and features in the Windows on Windows 7 firewall

  I try to add a program to the Windows Firewall exceptions list. When I go to control configuration\systeme and Security\Windows Firewall\Allowed programs, I discovered that there were not all of the programs listed.

  If I click on the "Edit settings" button, it becomes grey and nothing happens. I am the Admin so I should have access to it. When I click on the button "Allow another program", any program, I am trying to add will give me an error message saying "firewall cannot add Windows ' [program]" to the list of exceptions.

  This has happened recently. I was able to add programs to the list of exceptions before.

  Thanks for the reply.

  Run a place upgrade to repair your operating system

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
  http://support.Microsoft.com/kb/2255099

  Note: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  Please follow these recommended steps and post if you still experience the problem.

• Why programs not marked in the list of windows firewall exceptions are still able to maintain the internet connection?

  Original title: exceptions to firewall

  Can someone explain how I have after uncheck the programs in the list of windows firewall exceptions, they are still able to maintain an internet connection? I use XP sp3.

  1. what makes you think that this unnamed programs are still able to maintain an Internet connection?

  2 Windows Firewall blocks unsolicited incoming connections.  Thus, for example, if you (or malicious software), set up a FTP server running on your computer, Windows Firewall will block an application from the Internet on your computer that are trying to establish a connection and download some of your files.

  However, when your web browser sends a request to a Web site server to load a page, incoming web server traffic is allowed because it's in response to a request made on your computer.

  This distinction between the incoming and outgoing traffic is why some people insist that the third-party firewall, which usually block/monitor of traffic in both directions is required.  The scenario is that you inadvertently introduce malware on your computer (in any number of ways), and then the malware "phones home" to establish a link with the bad guys, who continue to do what they want on your computer.

• In MS SQL Server Management Studio, cannot add a port to the Windows Firewall exceptions list.

  I am trying to debug a sql script in the debugger to MS SQL Server 2008 and I received a message saying 'could not configure the Windows Firewall. Cannot add a port to the Windows Firewall exceptions list. "Use the Panle controls to manually configure Windows Firewall.

  Hi GusGomez,

  The question you have posted is related to the server and would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you
  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer
   
  Hope this information helps.

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How can I configure xbox 360 on windows XP, all instructions are for Media Center which I did not and asks the key code.

  Windows XP and using the Xbox 360!

  How can I configure xbox 360 on windows XP, all instructions are for Media Center which I did not and asks the key code.  I don't have media player. I received a key to the xbox code, BUT Media Player do not ask for it? My wireless works fine.  XBox works very well. Yes, I know that I should upgrade to Windows 7 but until my budget allows, is what I have.  Thank you.

  Try this link for XBox: http://social.msdn.microsoft.com/Search/en-US?query=XBOX%20on%20Windows%20XP&ac=3

• How can I change the default topics listed in Windows Explorer?

  When I look at the files in Windows Explorer there are positions that I find little use for me. I would like to change the default headings listed to display only those that I use most often as update, size, Type and Date of creation. How can I change the default settings for securities so that these topics, such as tags and side are not displayed?

  To change the headers, right-click on the header bar, and click more.  You will see a list of options to be included in the header, and you can place about to adapt to your desires.  But they will not stick unless you modify the template for this type of file.  Procedures for this follow-up.

  Here's how to change the default template for a folder: http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets the folder type template according to what are the types of files in the window and the settings display window Explorer. This will show you how reset the display settings of Windows Explorer folder (which is what I think you want), disable Automatic folder Type discoveryand increase the view of the folder cache to have Vista don't forget not the display, model of file type settings, the size or the position of a window for when it was still closed to the location of specific path.

  It does not work with the Sub record under, Open with, open in a new tab (Internet Explorer), etc... dialog windows of type through the good File menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program http://autosizer.en.softonic.com/ to resize them.

  Here is another article on how to modify the columns in Windows Explorer and sort in Vista: http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

  Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided: http://news.cnet.com/8301-13880_3-10019957-68.html.)

  I hope this helps in your situation.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to allow browsing the Web via the Windows Vista firewall

  I'm trying to lock the outbound firewall rules on my PC. My thought is that if there is no malicious software on my PC, I would not communicate with other computers. To this end, I really want to allow connections from web browser and to make remote desktop connections. Public profile in the Windows my PC firewall is active. In addition, all inbound and outbound connections that do not match one of the active rules are blocked. I created an outbound rule custom firewall program that allows the %ProgramFiles%\Internet Explorer\iexplore.exe program to establish connections. The rule is configured for all profiles and any Protocol (which probably should not be necessary). However, IE is still unable to connect. I'm rather confused and don't know what to do...

  Andrew

  Thank you all for all the great links :)  It turns out that the problem I had was the result of the creation of a firewall exception for the 64 bit version of Internet Explorer, rather than the 32-bit version.  When I changed the program that has been authorized by the firewall of %ProgramFiles%\Internet Explorer\iexplorer.exe \Internet.exe (x 86) % ProgramFiles %, I was once more able to connect to Internet by using IE.  Once again, thank you for all the links.  I think I understand a little better Windows Firewall now.

  Andrew

• Receive message "Please wait while windows configures the status" and then "the component that you are trying to use is on a CD Rom, please insert". I don't have the CD. How can I stop this?

  Windows Setup status

  Whenever I start my computer, I get a series of pop-up boxes that talk about "Please wait while windows configures the State" and then the one that says "the component that you are trying to use is on a CD Rom, please insert".  I have no idea what it is, and I have no disc to put on this line?  If I hit the buttons cancel these boxes enough times to go, but it's annoying and there is notihing badly with the operation of the computer, after I get rid of the boxes.  No idea how to stop this from happening again?  I did all the steps that have been mentioned earlier and no results.  I even did a system recovery.  I don't know what to delete.  Please help thanks

  Hello

  These messages usually mean that you have a problem with the HP printing software

  Contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact HP options at the link above.

  http://h30434.www3.HP.com/

  HP's Support Forums at the link above.