How could I connect a DELL PowerVault MD3200 as extension of nested a DELL PowerVault MD3200.
I wonder if it is possible to connect a DELL PowerVault MD3200 as extension of nested a DELL PowerVault MD3200. If it is possible how I could do (wiring only?)?
Unfortunately this is not a configuration supported because you cannot connect to a controller module raid with another raid controller module... You must use a MD1200 behind the MD3200.
Tags: Dell Products
Similar Questions
-
Sorry, but I'm still pretty new to LabVIEW and NI MAX I plugged the two devices (a linear probe and an angular encoder) for my NI 9401 chassis. I figured out how to create tasks for each and continuous readings of samples of each. Trying to run both in LabVIEW, I get the error message saying that I can't run several tasks at once. He suggests the control task VI, but I did not see any help. Any advice?
Here is some general information, whatever it's worth: two encoders work the same clock source, PFI4, which, to my knowledge, is the CTR 1 A, where the the angular encoder signal is wired in. Physical channel linear is ctr0 and the angular is ctr1.
Thank you very much for taking the time to review this issue and help me out!
-
iTunes could not connect to the iPhone "IPhone by Simon Young", because an invalid response was received from the device.
You have upgraded to iTunes 12.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer. Software update checks only the updates to the current version of the system that you are running but that itself can be updated. It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. You can try to install the free El Capitan OSX 10.11. El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB). Making a big jump in versions of system is also more likely to affect the old software.
At el capitan Snow Leopard, it will make my macbook is slow? - https://discussions.apple.com/thread/7412959
Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/
If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.
-
Prioritize network connections
OK, here's the situation.
I have a regular ethernet connection that provides me with a network and the internet.
I have also a tablet PC which I attach to my PC so I can use it as a controller. (Not that it is important, but it's for a DAW/Midi controller)My problem is that whenever I place my tablet, PC starts by ignoring my normal connection and taking the internet from my Tablet (even when it is not connected to the internet). As a result, my internet is de-energized once I tie it, if I'm not as under the wifi on my tablet.
My question is, how could I give priority to my network connections, (without turning off the strap attached, as it took), so that it uses the internet from my main network connection?
Hello
As well as the troubleshooting provided by Boumediene steps, you can also try the steps in this link. Some screenshots are also available on the link for a better understanding.
Hope you will find this is useful.
-
error code (-3212) itunes could not connect to the store, make sure your network connection is active and try again. Can someone tell me please how to do this?
Hi vivasiousv,
1 when was the last time it was working fine?
2. did you of recent changes on the computer?
See the links in the Apple Web site and try the steps mentioned below.
http://discussions.Apple.com/message.jspa?MessageID=6096760
http://discussions.Apple.com/message.jspa?MessageID=8436848
For additional support post your query in the Apple discussion.
http://discussions.Apple.com/category.jspa?categoryID=150
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Browsing databases of Virtual Center failed: could not connect to server NFC, can any body help me how to solve this problem please
Hi Mallik7, please try the following steps, you must succeed to solve the problem.
To connect a client to vCenter directly to the ESX host error-free work.
Files/etc/vmware/config the ESX host contain the lines:
------------------------------------
authd.soapServer = 'TRUE '.
prefvmx.consolidateDeleteNFSLocks = "TRUE" authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.
Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.
------------------------------------
This problem occurs when a carriage return is missing from/etc/vmware/config. To resolve this issue, go to edit/etc/vmware/config:
1 make a backup of this file from the path - / etc/vmware/config, by running the following command:
CP/etc/vmware/config/var/tmp /.
2. edit/etc/vmware/config so that there is a return transport after the line:
prefvmx.consolidateDeleteNFSLocks = 'TRUE '.
While he reads the following:
---------------------------------------------
authd.soapServer = 'TRUE '.
prefvmx.consolidateDeleteNFSLocks = 'TRUE '.
Authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.
Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.
---------------------------------------------
3. restart the management agent spend.
Note: Make sure that you are not in your environment name resolution problems.
-
I downloaded the programs I needed one month when I bought my plan. Today I connect to my adobe account to download edge animate and he only gave me the trial version! How could it be? I have a plan for full access?
Hello
First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.
https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:
https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html
-
I can't access my account... message says: "the user profile service could not connect..." User profile can not be downloaded... »
Help, please...
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
So I am a new iphone 7. I had a 6 before that. Everything was fine until the day where I got the 7, I decided to try a manual on itunes for my 6 backup so that I could put this on the new phone. I use now icloud backup but before that he always did on my computer. Its itunes version 12.2.2.25 as it is the most recent, that I can run with 10.7.5 which is the newest my mac pro can work without hacking it. Again, never had a problem before it save and use it to transfer music. Anyway, I received the message "iTunes could not connect to the iPhone"iPhone"because an invalid response was received from the device." I tried 3 different usb cords. I tried both ports to the front of the computer and all 3 in the back. Abandoned and did a backup icloud. Installed on the new phone. Everything transferred except my music library which is real download of my CD via itunes. If something was wrong on the iphone 6, surely the new phone that starts with a clean slate will be very well... wrong. Same message. Leaves through ports, cables, etc. Is it just a simple matter of ios 10 now works with my version of itunes?
A new phone will be iOS10. iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer. Software update checks only the updates to the current version of the system that you are running but that itself can be updated. It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. OSX 10.9 and 10.10 are no longer available. You can try to install the free El Capitan OSX 10.11. El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB). Making a big jump in versions of system is also more likely to affect the old software.
At el capitan Snow Leopard, it will make my macbook is slow? - https://discussions.apple.com/thread/7412959
Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/
-
iTunes could not connect to the iPhone, because an invalid response was received from the device.
Just bought an iPhone 7 today and received the error message "iTunes could not connect to the iPhone because an invalid response was received from the device." Don't know what that means, and I have never had this problem with one of my previous iPhones. Thank you.
You run iTunes 7.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer. Software update checks only the updates to the current version of the system that you are running but that itself can be updated. It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. You can try to install the free El Capitan OSX 10.11. El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB). Making a big jump in versions of system is also more likely to affect the old software.
At el capitan Snow Leopard, it will make my macbook is slow? - https://discussions.apple.com/thread/7412959
Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/
If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.
-
"Could not connect to the server Game Center"
OK, so here's the deal:
Im trying to connect to Game Center on my old phone to synchronize the progress of game. When I try to log in, it tells me that it could not connect to the server. I tried just about everything I could find on the Internet without success (discount and hard reboot reset settings do not work, and the servers are not enabled). Could someone tell me please how to fix this?
iPhone 3GS, iOS 6.1.6
Honestly, I don't want to hear that if you encounter the same problem, I just want to know how to solve this problem. Thanks in advance!
Nevermind, it seems to have fixed itself.
-
I can't access my e-mail account (hotmail) like maintaining ping message could not connect.
: I hope you can help I can't access my e-mail account (hotmail) like maintaining ping message could not connect.
When I look for details, he said "p/s server has changed. Input new password. As I count years I don't remember the password. It started a month ago and my Tablet and phone keeps ping this message constantly. How do I 1. Change the server and 2. The password.
Thanks Maura
Hi Maura,
Welcome to the Microsoft community.
The community of Outlook.com is a good place to find answers to many of your questions how do and get advice from other users and members of the community. However, questions about your Microsoft account are not best dealt with in a public forum because of the personal information at issue. Click here to learn more about how to get help with your Microsoft account: where to get additional support for my account and information questions?
I hope this helps. Let us know if you need more assistance. -
I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates. Turbo tax support site says adjust the parameters or the rules on my security software to allow certain programs to install and works as expected. How can I solve this problem to allow updates? Thank you. CraigrH
What is your operating system and Service Pack?
What is your anti-malware?
-
I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?
Hello
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
-------------------------------------------------------------------------------------------------------------------------------------
For Windows 7:
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html-------------------------------------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html-------------------------------------------------------------------------------------------------------------------------------------
If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
I am unable to connect to my network wireless with my laptop Sony, (Vista home premium). This follows an infection in my desktop PC with a Trojan which did not stop, but slow internet browsing. I reinstalled vista windows on the pc and it works fine now bur my still gives mobile me this message. "Unable to connect to a Windows Service. Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. "I am the administrator on my pc and laptop. I tried to change the user nothing helps. I use Vista Home Premium Service Pack 1. Intel Core 2Duo T7250 2 GHz. 2 GB of RAM. 32-bit. Sony Vaio FZ31M. If you can give me instructions on how to remedy the situation, it would be appreciated. Thank you, Tony
Hi 1234Tony,
First of all, I suggest you that you also scan your laptop for infection by the virus. Second, reset TCP/IP stack Winsock settings. This could correct mistakes involving internet connectivity as a result of problems of installation of network software, due to a virus, trojan or malware infection or even due to disinfection of spyware security software.
To repair and put back the Windows Vista
- Click the Start button.
- Type Cmd in start it the search text box.
- Press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
- Type netsh winsock reset in the command line shell, and then press the Enter key.
- Restart the computer
If please reply and let us know if your problem is resolved or if you need further assistance
David O
Microsoft Answers Support Engineer
Visit our and tell us what you think.
Maybe you are looking for
-
Is a customer VPN as necessary Incognito on MacBook? I've recently updated Sierra
-
Why an error keep showing when I try to download educate.ie
Why an error keep showing when I try to download educate.ie
-
Problems to use two scb-68 has the NI PXI-6225
Dear nor Forum,. I have a chassis NI SMU-1078, with embended OR PXIe8135 controller. One of the slot is busy with a PXI-6225. I for a long time successfully using 1 connection SCB-68 block a with the PXI-6225. Now, I need another channel to analog ou
-
Update the 80070005 error code
I have problems with the automatic update of windows. I get the error code 80070005. I tried the convenience store and he told me that everything is fine.
-
Windows 7 Home Premium OEM upgrade does not not after RAM upgraded FRO 1 GB to 4 GB
New installation Windows 7 Home Premium 64 bit OEM worked the 1st time on workstation Dell Precision 380 (Pentium 4, 3.0GH, 1 GB RAM, Windows XP), so I registered with Microsoft. PC worked too slowly, so I upgraded the RAM from 1 GB to 4 GB. PC wil