How determine/set the power management setting

Is there a way to determine and set the power management setting / adjustment of the political power of esx host through PowerCLI?

Something like that

$desiredPowerPolicy = "static"        # Options are: static,dynamic,low,custom  

Get-VMHost | %{
    $powSys = Get-View $_.ExtensionData.ConfigManager.PowerSystem
    $key = ($powSys.Capability.AvailablePolicy | where {$_.ShortName -eq $desiredPowerPolicy}).Key
        $powSys.ConfigurePowerPolicy($key)
}

Tags: VMware

Similar Questions

  • How to stop the power management to change my clock speed?

    Greetings,

    I run a HP compaq nx6320 laptop.

    I noticed that sometimes, when the computer is unplugged, the clock speed of the processor is reduced. intuitively, this seems to be a technique of energy saving.

    Using the Intel processor identification utility, I get something like this:

    And I suffer notable sluggish performance for all applications.

    I know that laptops tend to conserve that unplugged while power, some for example dim the screen, but they allow the user to increase the lighting, although it would reduce the time the computer can work with batteries.

    I want something similar about the speed of the processor, I want to turn this feature off and power the computer at full speed while it is unplugged.

    In addition, this feature is errornous, I took the screenshot above, while my computer is running on the current! and do not know why the power management insists on reducing the clock speed.

    All this turns out be caused by overheating. I'm misleaded by the tip of the utility intel PID.

    The fan of my computer was blocked by the filter sponge, which is made of a material that is poor, so partially decomposed and clogged the fan.

  • How to unlock the Task Manager so I can get to my desk, when I start?

    How to unlock the Task Manager so I can get to my desk, when I start?

    Hey Jeffreymartin,

    I suggest you try the process again as an administrator. If you are the administrator, try setting the user account controls and try again.
    Let us know the status once you give that a try.
    Thank you!
  • Satellite C - How to change the power settings for the WLAN?

    How can I change how not having the power cable plugged affects the performance of my wireless network?

    Basically, my wireless works well when the power cable is connected to my laptop, but when it is disconnected from switching between web pages takes a lot of time and the signal is lost and must be restored each time between each Web page. Is that what I can do about it?

    Hey,.

    You can find the WLAN Card settings in Windows to energy saving power management:

    How to manage Windows power management features:
    http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  • Backlight is disabled until the power management software is loaded on the Satellite M40 - 295

    Greetings to all members of the forum.

    I am owner of ten months a Satellite M40-295. My problem is the following:

    When I start my computer the backlight is disabled until I go into Windows and the power management program is loaded.
    After that the backlight of the screen lights up. I tried to change the brightness with Fn-F6/7 and screens using Fn + F5 without success.

    Init information (init messages, such as the Toshiba and Windows logo) appears on the screen (I checked it under the intense light and the screen from another angle of view), so the adapter seems to work properly.

    Thanks in advance

    Hi Evangelos

    I'm afraid that now, you have a problem. If the unit won't start the BIOS chip is probably damaged. In my opinion BIOS update was bad idea.

    Right now I don't want write something on the screen because now it is not important at all. Please contact the customer Service of your country partner and let check the device. Sorry, but I'm 99.9% that the unit is now completely screwed.

    If the appliance shows any sign of life is the case for the service. :(

  • Satellite M100 with Debian - how to control the power and the cooling fan on

    Hey,.

    I M100 and I installed debian, works very well, but there is a problem.
    Cooling fan turns on the top speed of all time. I m not shy on unix.
    How can I control cooling fan?
    How to control the power to the laptop?

    Hi mate,

    have you ever heard of the toshutils? I highly recommend trying these tools. Just google for toshutils and you'll find a few nice applications. Should usually be included in the distribution you have, also, I would check with 'apt - get search toshutils.

    See you soon

  • Re: Satellite A100 cannot find the power management tool in order to use the FN + F2 keys

    I had to recently to wipe my laptop and reinstall everything, all managed to find it of back on my laptop, with the exception of the power management program, the Fn + F2 program.

    I don't remember what her name and I don't know where to get.
    And if there is a CD that came with my laptop, I'm lost.

    Can someone help me please?

    Hello

    There is only one tool of power management. It is called; TOSHIBA Power Saver.
    You can buy it on the European driver Toshiba page!
    Choose the model of laptop just in the form of driver download, download it, unzip the package and install it!

    Concerning

  • How we touch the power LED cable (model SR5702F Office)?

    How we touch the power cable LED on HP 517069-001 (model SR5702F Office)? All but one connector are color coded. Who is that a problem is this is a single line with an end connector have covered the (black). Thank you

    The pinout is a follows:

  • 'voltage design' vs real 'tension' in the power manager

    Just today, all around the navigation in the power manager, I noticed that the values of 'design' and 'tension' on the 'battery' tab are different! The "design power" reads 11.10V, while the 'tension' reads 12.06V.

    I feel that it is actually normal... but maybe someone can confirm my suspicions? Out of curiosity, why these two values differ and what that means?

    I use using a T510 running on win7 x 64, if this is no help at all.

    voltage will drop over time, while the nominal voltage provides a constant reference point to tell you what kind of condition is in your battery, and if it needs to be replaced.

  • How to open the maintenance Manager to change the printer ink

    How to open the maintenance Manager to change the printer ink

    Do you mean physically change the ink cartridge?

    I would check with the manual that came with your printer.

  • How to increase the power of the signal microsoft virtual wifi adapter

    How to increase the power of the signal microsoft virtual wifi adapter? How change the virtual wifi for my external usb wireless adapter and make it work the same?

    Hello

    I suggest the following methods and check if it helps.

    Method 01:10 tips to help improve your wireless network

    http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=poyhbeDlRAP

     

    Method 2:

    (a) plug your modem wireless on one of the USB ports on your laptop computer and if necessary, turn on the modem.

    (b) right click on the "Network" icon in the lower right of the desktop and select "Connect to a network." Wireless modem will now be recognized as a network card.

    (c) right click on the name of your wireless modem and choose "connect".

    (d) enter the user name and password of the account that you put in place with the wireless modem provider.

    (e) specify whether you want the wireless modem to automatically connect to Internet or not. You can choose to have the modem connects automatically, unless you are in a roaming area.

    (f) press "Continue" to complete the configuration of the wireless modem and start using it as a wireless adapter.

  • How to open the Catalog Manager online

    Hello

    IAM trying to copy webcat between two PCs using the catalogue Manager.

    I can open the Offin mode.
    How to open the Catalog Manager online.
    opening online showing url which would be the url...

    thnx

    Hello...

    The URL should be:

    http://MachineName:9704/Analytics/saw.dll

    If a, b, systems are connected, you can use one or a b machine name in the url, and then access the corresponding machine catalog objects.

  • How to set the power management settings to prevent my system mode sleep?

    computer stopped at the fast

    How to stop the computer after shutdown if you mount a way for only 30 to 40 seconds

    Type the word power in your Start menu, then choose "change when the computer sleeps."

  • automatically optimize for costs of life battery batt to 100% within the parameters of the power manager

    In the settings of my ThinkPad Power Manager W530, I chose the option "automatically optimize for life battery" (battery-> maintenance-> Mode of Charge of the battery). Nevertheless, he always fresh and keeps the battery at 100%. Is it normal for a battery 9 cells?

    Link to photo

    But many articles and discussions here at the forum State, actually in charge at 100% is not tor good battery life (see for example this article http://forums.lenovo.com/t5/Welcome-FAQs-Knowledge-Base/How-can-I-increase-battery-life-ThinkPad/ta-... ). Do not miss anything?

    Thank you!

    Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

    No matter how many charge cycles the battery on it, just the time where you change the batteries maintenance mode. If you have configured to maximize battery life, the battery may charge at a lower percentage (somewhere around 90%, more or less a few percentage points), but will show this figure as "integral" or 100% for the system. If you change the mode to load completely, then the maximum capacity will change to read the actual capacity of the battery.

    The only way your situation would be a concern if, after setting the battery in order to maximize the battery life, then using the system on battery and load up once again, the battery always charged up to the full 94 w/h instead of reducing the number.

  • How to access the computer management?

    Original title: computer management concole restricted by policy
     

    How to enable access to the concole menagement computer which is limited by the policy snap-in?

    Hi Nikola Dragutinovic,

    Welcome to the Microsoft Community Forums.

    According to the description, it seems that you do not want to activate the computer management console, which is limited by the policy snap-in. I'll be happy to help you with this problem.

    The setting of group policy to restrict users to the explicitly permitted snap-ins list lets you selectively enable or disable the Microsoft Management Console (MMC) snap-in. However, before enabling this setting, you must activate the settings in the folder "restricted/permitted snap-ins" software snap-ins MMC that you want to use.

    I suggest you to follow the steps from the link and check if it helps.

    You must enable explicitly pluggable MMC that you want to use before you enable the group policy setting "Restrict users to the list of snap-ins explicitly allowed" in Windows XP and Windows Vista

    http://support.Microsoft.com/kb/931865

    I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

Maybe you are looking for

  • Cannot install on my Satellite C855 1MZ BT

    Hi all PC: Toshiba Satellite 1MZ-c855Operating system: MS Windows 7 Edition home premium 64Cannot install Installation BT. stuck [here | http://imageshack.us/photo/my-images/805/37790030.png/].All tips are wellcome.

  • Quiet clean server

    Hi all Recently, I realized that a program called "SilentCleanServer" appeared from nowhere running in my background. I tried to force it to quit, but to no avail. Tried searching with avg anti virus as well, but could not find anything with her. Thi

  • Permutation between 2 lines in a control table

    How do swap you 2 lines in a table without delay effect? Currently, I copied all the data for a row to a temporary buffer, crush the line with the line to be traded. Then replace the line interchanged with the data in the temporary buffer, something

  • Installation of virtual operating system PC

    Can we then jeutiliser of the same operating system installation disk in the Virtual PC as the original host PC?

  • "Support & was unable to start" Vista Home Basic which can be please

    I use Vista Home Basic with Service Pack 1 and 2 is installed. When I click on help and Support, it shows error message "Help & Support could not start" someone knows how to put this right please? Thank you.