How do connect me to a Win7 computer on my network home

Similar Questions

• How to connect my Blackberry and my computer with Bluetooth?

  I was wondering how to connect my blackberry and my computer with bluetooth and I tried, but he will not find my device. I don't know how check that the Bluetooth software included with Windows.

  Hello

  ·        Who is the manufacturer of the system and what is the model?

  I suggest you to consult the tutorial that is mentioned below. You also have a section that tells you how to check that the Bluetooth software included with Windows. If your system has been installed on the Bluetooth system then the icon will appear in the notification area. If this isn't the case, you must install the Bluetooth drivers on the system.

  How to set up Bluetooth connectivity between a smart phone BlackBerry and BlackBerry Desktop Manager

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB04132

  I suggest you return the item mentioned below.

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to connect two harddiscs in a computer

  I don't know what's going to happen if I connect the

  hOW to connect two harddiscs in a computer

  http://US.yhs4.Search.yahoo.com/YHS/Search?p=How+to+Connect+Two+harddiscs+in+One+Computer&fr=AltaVista&FR2=SFP&iscqry=

  http://www.google.com/#hl=en&output=search&sclient=psy-ab&q=how+to+connect+two+hard+disks+in+one+computer&oq=how+to+connect+two+harddiscs+in+one+computer&gs_l=hp.1.0.0i13i30.3151.3151.0.7535.1.1.0.0.0.0.224.224.2-1.1.0...0.0...1c.b0ubsyG8v-w&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=5b25e3ab4ae8856e&biw=833&bih=548

  UTC/GMT is 17:27 on Wednesday, August 8, 2012

• How to connect to your Windows XP computer if I forgot my password?

  Original title: forgotten password

  I forgot the password. IM the administrator

  screen in safe mode, what I do now?

  Hi josegoggle,

  You can view the Microsoft KB articles and check:

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

  You forgot your Windows XP Home password? -Part 1: Introduction

  http://support.Microsoft.com/kb/894900

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forumand let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to connect to my HDTV Dell computer?

  Original title: remote monitor
  I have a Dell Vista computer. Plugged in computer to HDTV SVGA cable, but get no picture on the TV. The input of the TV is correct. What is my problem?

  Have you changed the input on your TV?
  You must also configure your graphics card options. Right click on the desktop-> graphics properties.

  How to connect a computer to your TV
  http://www.techlore.com/article/10061/how-to-connect-a-computer-to-your-TV/;JSESSIONID=C76E35DF11E36B40811F5B7F1D51284C?textpage=2

• I installed a driver for my printer Hp Officejet Pro L7380. How to connect the printer to the computer that works with windows vista?

  I installed a driver for my printer Hp Officejet Pro L7380. I can print from my computer and it detected that it, I can't scan anything on my computer because it is not connected. I have tryied Conect it but can not select. So my question is, how I connect printing to computer?

  Specify that you are trying to scan a document Hp Officejet Pro L7380 to your Vista machine.  It has only a single computer attached, or is it a printer networked with other computers?

  If you have installed the base drivers and not the additional software that allows scanning etc so maybe it's why you fail.

  Have a look here.

  Software & Driver Downloads
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=au&DLC=en&sw_lang=&product=3198092#n190

  It might be possible with just the base drivers, for other software, such as your Photo editing programs, including painting, for import documents or images from the scanner.  Windows Fax and Scan can be able to do.  When you go in such programs are there options scan and they see your scanner?  If this is not the case, try the full download.

  If you want to of HP to make scanning programs, you may need the-base drivers and software (larger download).

  For my HP ' All in one ' works like a scanner, it was necessary for me to download all drivers and software.

• my hp deskjet 840C is connected to my desktop, how can I connect it to my laptop computer in my network

  my HP deskjet 840C printer is connected to my desktop, how can I connect to my laptop in my network

  [Moved from Community Participation]

  Hello Stephen,

  You did mention the operating system installed in the laptop. Provide that information will help you provide better assistance.

  Basically, if your laptop and the printer are connected to the same network (or even router), you can configure and connect to this printer as a network printer in the laptop. The article I'm referring below has a tutorial on how to connect printers (Local and network), please go through the information in there and see if it helps you as well.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-7

  If you need assistance, just reply to the version of the operating system running on the laptop, and we'll be happy to help you.

  Thank you and have a nice day ahead!

• How to connect the Officejet Pro 8100 printer to wireless network

  Bought a "nine" Officejet Pro 8100 and want to use via my wireless network. The CD supplied with the printer is obsolete. Updated Apple software but can't see how to connect the printer to the network. Getting Started Guide is no help on this issue. Searched for support without result pages. Utility HP does not provide a method to set up a wireless feature. Find all the instructions, I say first of all make sure that the printer is connected to the wireless network, and that's what I can't find out how. What I forget?

  Finally, I called HP hotline for help and was rescued. It turns out that Apple's software update software includes all the required components. The software from the HP Web site is no longer available. It's frustrating to see the Getting Started Guide refer frequently to the HP installation wizard and be unable to locate it. Once the wizard tech took control of my computer and installed the necessary software, it was a breeze!

  I also note that compose the support number to talk with a guy was rather brief: between 1 and 2 minutes, I recall. Although there was a menu of the phone, it was not a large (unlike the attempt labyrinthine and often circular to locate the online help).

  Insofar as HP knows the necessary software in not available via software update or directly from HP, wouldn't make sense to inform buyers, as well as how to access? At least do not place meaningless, useless on the Web site links that lead into oblivion and frustration!

  Although I did appreciate the journey, I finally arrive at my destination. Thanks to Aris, HP technician. You are exceptional!

• How to connect a USB-wireless printer to a wireless network without PC

  Some HP printers do not have a Wizard of wireless configuration integrated into the façade to connect to a network.  These models install to a computer via a USB connection and the software then sends information wireless via the USB cable to the printer.  However, you do not always have a present computer and still need to connect these printers to a wireless network.  You can use a wireless, like an iPad device, to do this.  For the example below, I used an iPad and a printer Deskjet 3510.

  The first step is to make sure that your printer is aired at an (Ad Hoc) network.  To do this, turn on the printer and press the wireless or wireless Tower, and then in the Setup menu. Connect the iPad (or other wireless device) to the signal being broadcast by the printer wireless.

  Once the iPad is connected to the printer as long as a network connection, open the Web browser on the iPad.  Type 192.168.223.1 in the address bar and go to this site.  Printer status page should load and look like the picture below.

  

  Click the network at the top of the status page.  You can get a quick warning while being redirected to an HTTPS site.  Click Ok in the message box to continue.  When you click OK, you can get a warning about the identity of the server or the certificate.  Select the option that allows you to continue.  The wording can vary from a browser, but there should be an option to continue anyway.

  Network status page should now be loaded at this point.  Select Assistant wireless to start the installation of the wireless network and click Next.

  

  When then is selected, it must list the available wireless networks.  Select your network from the list and click Next.  When the network is selected, it should be noted.

  Enter the network password if necessary and click Next.

  

  A message should be received indicating the name and if security is enabled.  The message below which must indicate that the settings have been saved successfully.  If it indicates that the settings were saved successfully with an error, the configuration of the network is more than likely operation.  Click Ok at the bottom.

  

  After selecting OK, select status to check that the printer is connected successfully.  It may take a few minutes for light wireless to the printer to stop flashing.  Once it is a solid blue, the printer must be on the network and operation.

  

  Once this is over, then you will be able to reconnect to your wireless (wireless router) normal signal for internet access.  Now, the iPad and the printer are on the same home network.

  I hope this helps.

• How to connect Equium A100 and second computer via LAN

  Hello

  I was wondering if someone could help me.
  My partner and I have some difficulty with the creation of a local network between its computer and my laptop.

  Basically, the main thing is that the computer can see my laptop, but it isn't recipricating.
  My laptop is the Equium A100 (XP media Center) and as far as we know really on his computer, it's that his dual pentium 4, windows XP Home Edition and it is a pain full in the back!

  Hello

  See this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170

  It is described how you can connect two PCs using cross-over cable.

• I need to get data/files from my old hard drive that won't start no-how I connect it to my new computer?

  I have a new computer with Windows Vista.  My old computer does not start (lights turn on but just spinning noise that nothing appears on the monitor).  I need to get the data/files from my old hard drive.  Can I connect the old drive to my new computer to access the files?

  Connect the older hard drive to your computer and transfer the content:

  How do I add an additional hard drive
  http://www.WikiHow.com/add-an-extra-hard-drive

• How to connect my mouse for my computer to load?

  I have a 2-supplied mouse with my iMac, retina 4 K, 21.5 inches computer.  The battery is dead.  The manual says to plug it into the computer to charge the battery.  It sounds probably silly, but I do not see where to plug the power cord on the mouse.  I have the lightning to the usb cable that came with my computer.

  Plug the cable into one of the USB ports on your iMac.

  Recharge the battery in your Apple - Apple Support accessory

• How to connect a u2414h monitor to computer dell inspiron 7720 laptop?

  The monitor came with two cables, miniDp to Dp that I can't connect to my laptop and a USB cable, it's one I use to connect the monitor and the laptop. and well I tried all the input parameters in the monitor (displayPort, MiniDisplayPort, HDMI1, HDMI2), I always get a message "No XXXX Cable". Any help will be much appreciated

  You need a DP or HDMI cable to connect your monitor.

  The USB cable is only to link the USB ports on the monitor to your laptop.

• Unable to remote connect to another computer on the network home

  Greetings,

  I have a Windows 7 desktop computer and a laptop Windows Vista Edition full.  I am able to connect using the program of remote connection to the laptop from the desktop, but not the laptop on the desk.  I get
  an error that says "Remote Desktop disconnected' and inside the box, he says" this computer can't remote not connect "and communicate with the administrator, me.

  I turn off the Norton firewall on the desktop and no luck.  I typed the IP address and the name of the desktop computer.  Both get the same answer.  I ping the desktop from the laptop.

  Any suggestions?

  Hello
   
  1. which is the edition of Windows 7 is installed on the desktop?
   
  We recommend that you first of all to you allows to cross check if remote desktop connection settings are correct on the Windows 7 computer. To do this, follow these steps.
  1. Click Start, right-click computer and click Properties.
  2. in the left pane, click Remote settings.
  3. in the System Properties window, click use remotely.
  4. make sure that the following settings are applied.
  a. allow for Assistance connections to this computer remotely.
  b. the remote desktop section, select "allow the connection of computers running any version of remote desktop (less safe).
  5. apply the settings.
  6. restart the computer and try to connect to the remote computer.
  
  For more help on desktop connection remotely, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems
  For more information about remote desktop, see this link:
  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Other than the use of Messenger, how do I send messages to WIN7 for XP on network domestic?

  On our home network, we want to be able to send messages between a WIN 7 laptop and an XP laptop. We can use Messenger, obviously, but if one or the other is not signed, it means travelling wing to the West Wing to get the other to connect. Maybe he went back to the old telephone company!

  All the serious answers welcome, thank you.

  Not sure, but it can help - http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/msgexe-netsend-anything-availible-on-windows-7/e9743edc-afa9-4942-b1c7-66baf443067b (I have not tried just found it on a search)

  
  

  Maybe there are things like that (found on google)? - http://www.cezeo.com/products/netsend/
  

  As I say, Ive not tried so if you download, check AV before installing.