How do I activate hardware acceleration for playing solitaire?

Similar Questions

• How can I activate hardware acceleration in windows 7

  at the opening of "solitaire", I get the message that I am "software rendering mode. I have the latest driver installed nvidia then, how can I solve this. I did nothing other than the insatll winows 7 upgrade (from vista)

  can be one of the two questions, I came around. not isolated for windows 7, still
  any OS

  one of the two situations I've seen:

  1 :) the oldfix of this version has been updated of the motherboard chipset driver

  specifically, the AGPmini
  Accellerated Graphics Port driver in Device Manager (System Devices)
  install the motherboard from the motherboard manufacturers site updated
  ENSURE YOU HAVE THE UPDATE CORRECT for your model of motherboard
  for most systems, without it, your video card will work in Mode PCI (very slow)

  2 :) a parameter in your CMOS (BIOS Setup) is expected to change the rate of the PMA
  take note of the setting and change as needed (most newer vidcards will 8 X-16 X)
  You can access your CMOS at startup system (usually ESC, DEL or F2)

  Note: don't get too fancy in the BIOS that you can make your system unable to boot
  Ask your administrator or a friend who knows what they are doing there

  PS: you can even get lucky and try to update directly from the Device Manager (worth)
  but overall you need to choose the latest drivers for chipset for you motherboard as should be
  give better results

• Satellite Pro 4600: WinXP - no hardware acceleration for dvd?

  I have a satellite pro 4600 pentium 3 800 with 128 MB of ram and graphics Trident CyberBlade XP card. The device is perfectly able to reproduce DVDs with the software alone by using PowerDVD 6. However due to the fact that my battery is almost dead, I would be able to play the DVD the most optimized battery settings.

  Setting of the unit (approximately 350 mhz) low processor should be able to play DVDs if backed up by hardware acceleration, since cyberblade claims to be a card directX 7 with motion compensation and idct. However 4 PowerDVD 6 PowerDVD and windvd 7 do not recognize hardware acceleration under windows XP.

  In the past, I had a similar problem with a laptop computer with a graphics card than cyberblade i7. I was then able to activate hardware acceleration using just powerdvd 4 and windows 98, but I don't want to resort to that.

  Can someone help me? Do you know any software reading with the support of cyberblade XP Windows? Do I need any other drivers? I have the drivers on the toshiba site, and they date back to 2001.

  Hello

  Unfortunately, I n t have any experience in hardware acceleration of the cyberblade card but mobile graphics cards are not similar with Office PC cards.
  As far as I know the unit has a support of the Trident Cyber BLADE XP video controller 16 MB VRAM external video and DVD material.
  However, you will find the Toshiba drivers on the Toshiba site but if you need one on so I would say to ask the support of Trident.
  But if you use no drivers Toshiba you can do at your own risk!

• Where can I activate hardware acceleration in Windows 7?

  Where can I activate hardware acceleration in Windows 7? video

  Hello

  Thanks for posting the request in the Microsoft community forums!

  It seems that you must enable hardware acceleration on the computer. Provide us information.

  1. what exactly is the problem you are having?
  2. you receive an error message on the computer?

  Try the suggestions to turn on the hardware accelerator
  a. open the screen resolution by clicking on the Start button, click Control Panel and then, under appearance and personalization, select adjust screen resolution.

  b. click on advanced settings, select troubleshooting and then click on change settings.

  c. move the hardware acceleration slider to activate video hardware acceleration.

  d. click OK and then click Restart now.

  If you need help with this issue or other problems related to Windows Operating System, keep us informed. We will be happy to help you.

• How can I activate the report for individule family members?

  How can I activate the report for individule family members?

  Hello Dan,.

  Activation of activity reports to the members of the family security is easier than the steps below.

  To activate the activity tracking

  1. on any computer, sign in to the Family Safety website with your Windows Live ID.

  2. on the family summary page, click view activity report next to the name of the child, you can turn on activity reports.

  3. Select turn on activity monitoring.

  4. click on Save.

  To learn more, follow this article to the solution and go to the section find out what your kids have been up to on their computer .

  Protect your kids with parental controls

  Note: Whenever changes are on our parental control settings, we need to update it so that the changes take effect. Click on the button Refresh (located on the left side of the ?) top right of parental control window (the client installed on your computer) to refresh and get the last parameters.

  Thank you and best regards.

• Windows 7 desktop computers cannot activate hardware acceleration

  With the help of vmware view 4.5. I have 3 desktop computers that I published my review of compliance and the screen acts nervous every time that they connect and try and move anything. It takes all the time they are on. My thought was to activate hardware acceleration just like I would on any normal server I run under ESX, but the option is grayed out. Here's the window:

  

  Any thoughts?

  It's nice to know... don't forget to score points as correct or useful...

• How to enable hardware acceleration to play solitare?

  Original title: hardware issues

  When I try to play solitaire. He told me to turn on my hardware acceleration. How can I do this?

  You must ensure that the graphics card is at the height.

  I suspect that you have upgraded to Windows 7, so what you have to do now is obtained from the computer manufacturer site and download and install Windows 7 drivers for your graphics card, or, in the case of a desktop computer, go the manufacturer of graphics card and get the drivers for Windows 7.

  If it is not all, you will have to put up with what you have, or go back to the last known good operating system, or update your computer...

• How to find and activate hardware acceleration.

  I have a HP Pavilion dv7 and recently received a message from HP for an update.

  The message says that I have to make sure that hardware acceleration is turned on.

  I don't know how to find out if it is on OR how to turn it on.

  Any help would be appreciated.

  Thank you.

  Larry

  Hello

  Please watch a short video:

  https://www.YouTube.com/watch?v=8U-um6nfcKU

  Very similar to Windows 8.

  Kind regards.

• How to activate hardware acceleration and hyperthreading showed unknown?

  Hello

  I have install ESXi 4.1 on an IBM x3250M3. just wonder how to activate the acceleration hardware and hyperthreading showed unknown?

  Thank you and best regards,

  Kelvin

  It depends on the type of processor.

  The last CPU, there is no downside and a small performance improvement.

  Note that HT not fooled the number or carrots, but increse the number of logical cores...

  André

• How to disable hardware acceleration for the only area?

  Firefox is a great product and I had not any problems so far that I couldn't solve... but:

  Microsoft updated the interface of Hotmail user, Firefox will crash now, whenever I have send an email from this site. This can be "solved" by disabling hardware acceleration, but I don't want to have to endure the inconvenience of it just because of a site... My graphics driver is updated.

  So my question: is it possible to create a work around for this problem? I doubt that the hardware acceleration may be disabled for a single site, but maybe there is a way that allows me to start a new instance of Firefox without hardware acceleration or something like that so I don't have to not go to options, turn off, restart Firefox, check/send emails, go to options again and restart again... any ideas?

  Hello, Bloodthorn, sorry, but the hardware acceleration may NOT be disabled for a single site (and I would like that too if possible), try Mozilla Firefox, Portable Edition and disable hardware acceleration in a portable version.

  Thank you

• How can I activate remember passwords for sites. The box is not available to check on my computer

  When I go to security settings, the box "remember passwords for sites" don't is not highlighted, but the other "box use a master password" is highlighted for me to check. How can I get the passwords do not forget for sites to be highlighted?

  You have installed Norton software?

  • http://community.Norton.com/T5/Norton-toolbar-Norton-identity/NIS-2013-Norton-toolbar-unselects-Firefox-remember-passwords/TD-p/836598

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode

• How can I activate the spell for a text box that is just a line, for example submitted by e-mail?

  In an earlier version of Firefox, I found a site somewhere that told me what to do to turn on spell checking for text boxes that are just a line. I'm used to be able to send an e-mail with a subject that was not a misspelling. Now, it does not work. Please tell me how I can activate it once again. I'm on a Mac using Firefox 6.0.2. Thank you!

  See:

  • http://KB.mozillazine.org/Spell_checking
  • http://KB.mozillazine.org/layout.spellcheckDefault

  You can set the pref layout.spellcheckDefault to 2 on the topic: config page.

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences you can restore the default value or change via the context menu.

• Necessary hardware acceleration for MSTS Train Simulator

  I got an error when starting Miicrosoft Train Simulator on Windows Server 2008 R2 Standard x 64 Edition that says Train Simulator requires hardware acceleration.

  My computer specs:

  Processor: Intel Pentium 4 640 3.2 GHz Hyper - Threading SES I, II and III, 64-bit processor support

  RAM: 2 GB DDR 2

  Graphics card: Intel 82945G Graphics Direct X 11 installed and works perfectly

  Taken graphics Aero support WDDM 1.0

  Intel Graphics Media accelerator installed.

  Hard drive: operating system installed partition of 148 GB HDD 750 GB.

  How can I solve this problem?

  

  A

  Server is beyond the scope of this site

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How do I activate the acceleration Directdraw Direct3d acceleration AGp texture acceleration

  Please help I can not turn on direct3d

  ------------------

  Information System
  ------------------
  Time of this report: 01 19, 2015, 04:35:02
  Computer name: RENON-HP
  Operating system: Windows 7 Home Basic 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.141211) - 1742
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  Model: HP Pavilion Notebook PC g6
  BIOS: Version InsydeH2O 03.61.01F.52
  Processor: Intel (r) Core i3 - 2310M CPU @ 2.10 GHz (4 CPUs), ~2.1GHz
  Memory: 3072 MB RAM
  Available OS memory: 3020MB RAM
  Page file: 3415MB used, 2622 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 32 bit Unicode
  DxDiag previously: crashed to Direct3D (step 2). Re-run DxDiag with the command line parameter 'dontskip' or choose to not to ignore when you are prompted to collect information could result in DxDiag getting this information

  ---------------
  Display devices
  ---------------
  Card name: Intel(r) HD Graphics Family
  Manufacturer:
  Chip type:
  DAC type:
  The device key: Enum\PCI\VEN_8086 & DEV_0116 & SUBSYS_1670103C & REV_09
  Display memory:
  Dedicated memory: n/a
  Shared memory: n/a
  Current mode: 1366 x 768 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model:
  Monitor-Id:
  Native mode:
  Output type:
  Driver name:
  Version of the driver file:)
  Driver version:
  DDI version:
  : Model WDDM 1.1 driver
  Driver attributes: Final retail
  Date of the driver/Dimensions:, 0 bytes
  WHQL Logo would be: n/a
  WHQL Date stamp: n/a
  Identifier of the instrument:
  Vendor code:
  Device ID:
  SubSys ID:
  Revision ID:
  Strong name of the driver: oem8.inf:ATI. Mfg.NTamd64.6.1:iSNBM1ML_PROXY:8.882.2.0:pci\ven_8086&dev_0116&subsys_1670103c
  The driver rating: 00E60001
  Video Accel:
  Deinterlace caps: n/a
  D3d9 overlay:
  DXVA-HD:
  DDraw Status: Disabled
  D3D status: Not available
  AGP status: Not available

  I updated my drivers correctly from the manufacturer's website and tried the following method too:

  (Method 2):
  If the problem persists, you can also turn on graphics acceleration and check if it helps.

  To turn on graphics acceleration

  a. open display settings by clicking the Start button, click Control Panel

  b. click on appearance and personalization , and then click customization

  c. now, click display settings.

  d. click on display settings, and then click Advanced settings.

  e. click the Troubleshooting tab, and then click change settings.

  f. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  g. move the Hardware Acceleration full.)

  but to step e 'Edit' is greyed out... I can't click...

  Hello

  The computer is probably using a generic video driver rather than on the chip or card driver specific to hardware acceleration.

  Download the good video driver from the site of PC makers, the motherboard manufacturers site if she got the integrated graphics card or the video card manufacturers site if she got a separate video card.

• How can I activate my bluetooth for my dell inspiron with vista?

  I have a dell inspiron 1525 and may not know how to turn on bluetooth. I think that is a bluetooth because it contains a bluetooth symbol near the wifi symbol. Im trying to transfer the old pictures FRO my old phone not activated on my computer and then my new phone

  Thank you

  Hello

  The Bluetooth works with a phone? Check with their support and their documentation.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected
  When you click the item
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. http://www.NirSoft.NET/utils/bluetooth_viewer.html

  ================================

  Check with Support Dell and their forums.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.