How do I back up or reinstall a previous bios?
HP Compaq NC8430
Windows 7 Ultimate
Of blue screen memory dump
I've updated the bios from 68yvd worm f.oc 01/08/06
I need forms to roll back my bios. After update, the laptop stops indescriminately. As it overheats and stops. Windows 7 trying to recover, but the laptop won't stay down long enough for recovery to occure. Updated the original BIOS, that's what has caused this, so I just need help roll back.
Hello
You can find the new not very good following.
Unfortunately, because of the generation of your laptop, it will be difficult. You're probably thinking about portable ncurrent UEFI environment. There is no for your laptop.
I don't see Windows 7 support for your laptop available on the server support portal Compaq\HP.
When such a situation occurs that it is easier to remove the CMOS chip and install one that has the desired programmed BIOS. If you have the technical ability and an air station hot available solder\desoldering you can do it yourself. Which can be easily done by a BIOS recovery service. You provide the leadership BIOS and CMOS chip in most of the cases, with your laptop. You can search online to see if it is available on site for you. You can find the cost is greater than the value of currwent of your laptop and decide it's time to replace it.
Best regards
ERICO
Tags: Notebooks
Similar Questions
-
Hello
I use thunderbird for 3 e-mail accounts (POP, no message left on the server server), and I need returned my OS (win7).
How can I back up and reinstall account 3 without losing records "Inbox" and "sent"?Is it enough to copy the folders in Thunderbird/Profiles/Default/Mail, reinstall the OS and Thunderbird, create 3 email accounts in Thunderbird and replace the files newly created in the path above with old mail folders?
Thank you very much
lSo basically I have reinstall 1 backup the entire contents of the folder Thunderbird lies in AppData/Roaming 2 OS and Thunderbird 3 Replace folder Thunderbird above with the old
Yes, that's all!
Blockquotes <>what accounts? < / blockquote >
The profile that you have is all you need. It is ' just ' copy him on the same place in your new configuration.Oh and make sure Thunderbird is closed when you perform your copy.
-
Could not start vista how can I back up before you reinstall
original title: impossible to reinstall vista start, how can I save upbefore
"Vista has all of a sudden a black screen with error message: registry is damaged or missing" status 0x00000e9
How can I back up files to a CD without booting vista?
Hello
1. remove the hard drive and it slave in another computer
2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this
3. try Knoppix
http://www.Knopper.NET/Knoppix/index-en.html
BUT this method depends on your hardware in the computer that failed
-
just downloaded firefox 8 and disabled mcafee site Advisor how to get back to version 7
just downloaded firefox 8 and it disabled the Advisor site on my mcafee security suite. How to get back to version 7 until the site Advisor is compatible with version 8?
Although I gave up on it for now, if you don't have a lot of extension, you can run it in Version 8, actually if you ran it 7, you're probably doing something else that activate. As their website says you a version number you suggest to reinstall and restart Firefox twice, see
I have reactivated it as I had turned it off and it works, guess I'll try it for a few days now that I'm on 8.0. While the difference between what I ran on 7.0.1 this is I have reactivated earlier "McAfee Site Advisor" but then the main reason that I have no problems is that I avoid bad extensions.
I see that it is not marked as compatible with 8.0 but many of my extensions are not anyway. I have
- extensions.checkCompatibility.8.0 set to false
and my McAfee Site Advisor is 3.4.0
The extensions that I use are listed hereand I actually have links with the compatibility reports it for each extension, but were not check things there for several months.
-
I just reinstalled firefox because it had been infiltrated by MSN/Bing as a default search engine. As a result, I have a Google ugly and bulky at the start page. How to get back '' pure and simple ''?
("Plain and simple was one of the attractions of Firefox in the first place)Try "Reset all preferences default user of Firefox" on issues to troubleshoot Firefox in Safe Mode start window.
-
How to get back to El Capitan in Yosemite
How to go back to El Capitan Yosemite 10.10.3
If you have a clone of backup, you can restore to a new partition.
If your Mac comes with Yosemite, you can use system restore to restore a new partition.
If your Mac comes with the Mavericks or earlier, you will be not able to reinstall Yosemite without a backup full installer of Yosemite. Apple offers more Yosemite to those who do not have within their system.
Check that you do not have possible alternatives by reading this tip:
-
Even if I just turn on my computer and not do something, leave it on, Windows 7 will crash within 30 minutes. I can't find Vista Home Premium my Windows CD. I have one from another computer that I own (e-machine, versus the dell who is disfigured by 7). The e-machine cd-rom tells me that I don't have enough disk space to install Vista. I don't see any instructions on how to "go back". Any suggestions?
Hello
Unfortunately, there is no way to "roll back" and installing Windows 7.
You will need to reinstall Vista from the Windows Vista DVD recovery supplied with your computer. You will need your license key as well.
Here are the instructions on how to install Vista:
http://support.Microsoft.com/kb/918884
Please let us know if we can be of further assistance
Theresa
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
How to uninstall windows 10 and reinstall windows 7?
* Original title: novice
How to uninstall windows 10 and reinstall windows 7
I do not recommend coming back because I've seen too much to go wrong.Returning can be done only if you have installed in the past 30 days (if you created a new user, you should remove it before come back you)Back on the settings > update & security > Recovery > roll back to a previous operating system
This will only work if the windows.old and 2 hidden folders ($Windows. ~ WS & Windows $. ~ BT) are still present. If you do that you will need to re - install. -
I have windows 7 business, how to get back my vista?
I have windows 7 business, how to get back my vista?
Reformat the computer and reinstall Vista.
-
How to roll back to vista after an upgrade to windows 7?
How to roll back to vista after an upgrade to windows 7?
New computers that come pre-installed with Windows 7 or Windows Vista often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
------------------------------------
This is how the recovery partition is available for the most popular brands
For Dell, press CTRL + F11 directly after switching on the device
For HP, press F11 directly after switching on the device
For Toshiba, press and hold "0" BEFORE and during the power upward
For Acer, press and hold ALT + F10, as soon as you see the logo
For Asus, press F9, as soon as you see the Asus logo.
Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"
or
Windows Vista download and reinstall
Files Windows Vista Setup official (Digital River)
Note these .iso files can be used with a Dell/no - product Dell OEM keys but the phone activation is required (see the note at the end). This key is usually located on the COA attached to the base of the system.
Sale to the retail/upgrade product keys that can be used with these .iso files and activated by internet or by phone. See the note at the end for the activation of the phone.
Windows Vista (in English) with Service Pack 1
Windows Vista (x 86) Windows Vista (x 64) X 14 - 63452.exe X 14 - 63453.exe Boot.wim Boot.wim install.wim install.wim Installation instructions (creation of bootable DVD/USB)
You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).
To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'
Select the record button browse and select the folder of Vista. Then select Advanced.
Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.
Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.
Select the generate button.
Save your .iso
Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.
Once we have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a DVD or bootable USB (requires a blank DVD or USB flash to at least 4 GB key).
Note: You can use the HP format tool to format your USB (run as administrator) after the windows install so you can use it as a USB again. ;)
-
I recently bought creative cloud, and after a few updates and downloads, my desk right icon now produces an empty rectangle if clicked. How to bring back my list?
I ended the application of uninstalling and reinstalling and that seems to have done the trick. Thanks for the help - it lead me to the right place
-
Hoi
Ive just updated to 2015 and all photoshop my ins plug attached to my previous version disappeared. Someone knows how I get back them please?
Thank you
Hi alanp
We recommend that you reinstall your Plugins after downloading the latest manufacturer's Web site.
View 2015 release of Photoshop CC: FAQ
Concerning
~ Assani
-
Re: Font book.
I chose "restore standard fonts" by mistake. How to get back on my selection. The Cancel button is grayed out so I can't cancel it. Any suggestions? Thanks in advance!
If you click on 'Restore the standard fonts', fonts that are not included in the OS X systems is placed in a "fonts folder (deleted) next to the fonts folder.
/ Library/Fonts
-
Opening 3.6: in some way something changed: in the browser, I see now several versions of each image (master & version), how to get back to showing only latest version? (Note: I don't want close chimneys, just not to show them)
You have recently allowed the preference of the opening > advanced: create new versions adjustments?
The opening will create a new version whenever you adjust your image. With this preference is disabled, all changes will be stacked on the current version without creating new versions.
You can stack the new versions automatically if you use "opening > General > stacking new versions automatically.
But there is no option to avoid the multiple versions of a photo in the browser, as far as I know, so the battery version is open. You can stack several version and keep the closed stack or refrain from creating new versions for each change.
-
How can I back up my address book
How can I back up my address book
just open the address book
choose Tools and export
Maybe you are looking for
-
his studio DTS: password administrator or power on password
I stuck on disabled system 75174891 after 3 password attempt
-
iMac, keyboard no longer works
Hello My iMac is less than a week and I noticed that the keyboard stops working when the two USB is used. Is there a solution for this? Can I have a defective keyboard? It's really frustrating. Someone at - he lived it and have any tips?
-
Hello, I receive a message telling me that my AC power adapter type cannot be accepted.
A few days ago, I started having a power warning message when I turn on my laptop. It is said that the AC power adapter type cannot be determined. Beacause it my battery will not charge. But it's the power adapter that came with it and I have used fo
-
CD/DVD getting not recognized with error code 0 x 8007003
Original title: Windows Media Player my lap top will not come CD dvd I used microsoftxit as fair, he told me that it can not detict cd dvd and error code 0 x 8007003 can do everything what it means please
-
Allow a URL by limiting access?
I want to allow internet access for the hour of lunch for a group of computers. I assigned the INVESTIGATION period and set up two access restrictions on REFUSE for the morning and afternoon. Is there a way to allow these computers to access a URL (w