How do I correspond to a network on a Samba server drive

Similar Questions

• Participate in a network Windows with Samba server

  If anyone can help with this? I have installed Samba server - do I need to install anything else?

  This is according to the functions you need on the server and I n know what you need because you didn t this post.

  In your case I a bit with Google search. In the internet, you can find a lot of description, how to create a network with a server Samba and Windows and Linux clients.

• Satellite A100-529: How can I enable the wireless network adapter

  Hi all!

  I'm new here, but I want to know how can I activate the wireless network device. On my Toshiba Satellite A100-529 keyboard is a Fn key that must be pressed with the F8 key to turn on the wireless network device. I did, but it does not work.

  What can I do to turn on my wireless device?
  Thank you!

  You are right. The FN + F8 key combination should be used to switch to the WLan card.

  But look, man. Have you checked if your laptop supports wireless network card?
  I think it does not support the minPCI wireless network card and the card does not exist!

  That's why the WLan card cannot be activated :) you know ;)

• How to recover or find the network key for a router wireless (Netgear)

  Network wireless adapter NIC Ethernet network device

  How to recover or find the network key for a router wireless (Netgear)

  Hi RaymondKramp,

  ·         What version of Windows is installed on your computer?

  If you have lost the key to network and not connected to the network, then you can reset the router to factory settings wireless.

  If you lost the key network and connected to the network, and then log on to the Web page of the router and get the key.

  For more assistance, you can contact Netgear Support:

  http://support.NETGEAR.com/app/home

  Hope this information helps.

• How to xp 64 pro wireless network connection wizard

  I installed xp64 pro on my desktop and a dlink wireless card but there is no wireless connection wizard. How and where can I get a wireless network connection wizard. I also tried to get for xp64 sp2 but could not find.

  Hello

  · What is the number and the model of the computer?

  You can check the link below which has steps on how to set up automatic wireless network configuration: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  You can download Windows Service Pack 2 for Windows XP Professional, x 64 Edition: http://www.microsoft.com/download/en/details.aspx?id=17791

• How can I lock a shared network folder.

  I want to know about the network folder, how can I lock a shared network folder.
  Actually I'm under small network at home and I want to share some files, but I also want to protect files, no body, no go without my permission.

  Waiting for your response.

  Thank you
  Tauseef Ahmed

  Hello

  Adding futher to Wunders his Adviser.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  
  

• How to set the allocation of network by default in Vista?

  allocation network Deault in Vista

  How to set the allocation of network by default in Vista? I have two routers in wireless network, and it has stopped working. I want to get all default computers to the router to start.  Thank you

  Hello

  Are you connected to the server or if you are on a domain network?

  I suggest you follow the instructions in the link to the configuration of a default gateway on a network:

  Configuring multiple gateways on a network

  http://Windows.Microsoft.com/en-us/Windows-Vista/configuring-multiple-gateways-on-a-network

• How to connect to a hidden network

  I am trying to connect to my wireless internet home, but it is hidden.

  How do you find a hidden network to connect to?

  Hello Virginia,.

  Thanks for posting on the Microsoft answers Community Forum.

  Access points (APs) or hidden non-broadcast wireless network wireless do not broadcast their Service Set Identifier (SSID). Because non-broadcast networks wireless access points do not broadcast their SSID, they do not appear in the list of wireless networks that are available by default on clients based on Windows wireless. As a result, users need know the SSID and create a preferred wireless network with the SSID of the other network broadcasting. After that the preferred wireless network has been created with the identifier SSID is correct, the ease of wireless in Windows Automatic Configuration will be able to connect.

  
  You must contact the administrator of the hidden network and find the SSID before connect you.
  http://TechNet.Microsoft.com/en-us/library/bb726942.aspx

  I hope that answers your question. If please reply back and let us know if your problem is resolved or if you have any other questions.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I change my public network location at in Win7?

  On my server I am running Win 7 Pro 64 - bit (SP1) with an Ethernet cable to my router.

  I have several other network devices in my network, including wired and wireless, Win 7 PCs, PC Win XP and other facilities such as the backup network and media center.  I have problems with devices see each other (in particular my server) and the sharing of resources (files and printing).

  On my server, I am able to connect to the internet via my wired connection.  However, in the "network and sharing Center" under active networks I see "You are currently not connected to all the networks."  The link "Connect to a network" shows that I have no networks to connect to.   When I try to connect to my home group or create a homegroup, I said "To create or join a homegroup, network location of your computer must be on home."  Mine is set to public and I can't change it to make this change requires me to click on the home/work/Public icon/link in my active network and I don't have any network active (or inactive).  There is therefore no link to allow me to access the dialog box 'change the network location '.

  I tried (no problem found) network outages and homegroup troubleshooting (no problem found).

  I did do a Win 7 repair facility to solve configuration problems: I cannot access any network.  However, my original drive is an OEM Windows 7 Pro 64 bit without SP1.  Now that my machine was on SP1 for about a year, it does not allow me to do a repair installation, and the version on my machine is more recent (PLU) of what is on the installation disc.  Also, I considered uninstalling SP1, but which also failed.  An error message about missing files. I even tried uninstalling SP1 command-line and which also failed.

  What can I do to solve this problem before a thorough cleaning of your disc drive and a clean installation?

  ################################################################

  UPDATED: February 13, 2015 - finally fixed!

  The post on January 28, 2015 by BennyPootron led me to the solution.

  In RegEdit, to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles", I deleted all the profiles under the present (I had three).

  In addition, "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Signatures\Unmanaged" were three matching items which I also deleted.  This clean slate, so to speak, and when I rebooted, I could change my location of home network and join my home group.

  Thanks to BennyPootron for the idea that led to my solution.

  I don't know if this applies to Windows 7, but it does not work in Windows 8 and Windows 10.

  (1) open 'RegEdit '.

  2) go to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles".

  (3) find the location of the network

  (4) change the 'Category' DWORD to 1

  If this does not work, remove the key from the network, restart your computer and repeat.  It should work after that.

  Not exactly the answer, but what led to the solution.  FINALLY FIXED!   Here's how:

  In RegEdit, "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles" I had three profiles with names such as {4A3BFF36-4EA6-4415-AA5F-46CE449C95AB}.  I tried several things, including changing the DWORD value of the 'Category' 1 item in all three of these profiles.  It does NOT work.

  However, I have finally deleted all three profiles.

  In addition, "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Signatures\Unmanaged" were three matching items which I also deleted.  This clean slate, so to speak.

  IT WORKED!

  When I rebooted, I was able to change my network from the Public to the private, and he walked me through the process of joining an existing group established by another computer in our House.

  Finally almost 3 years after my original post, I have fixed the problem.

  Thanks to BennyPootron for the idea of a solution.

• How to disconnect from the PC network?

  Hello

  I have a Linux server with Samba file sharing. This way people can connect to the server of their windows PC and see everything they represent allows them to see.

  Thinking now, we have also a public PC witch different people connect to the samba server.

  The problem with the latter is that different people need to connect with different accounts to see what they are allowed to see. However, windows stores the credentials and connects automatically without the opportunity to sign in with a different account.

  I was wondering if it is possible in windows 7 (and if anyone knows, in windows XP too) how to sign out of this samba server? I'm sure that windows stores logins somewhere, so remove this information would be enough to let the popup windows for the new connection, just information?

  Thank you very much!

  Jeffrey

  'Remember my credentials' is selected by default. The fastest way to stop this is to run NET USE / PERSISTENT: NO to a command prompt. I have this in a batch file to logon (with off @Echo for the first line) that runs whenever a client connects to the network. If an action requires a name of user and password, the customer enters this information in the 'black' box (command window).

• How to make the Windows 7 network icon to show availability of internet connection? With flashing.

  How to make the Windows 7 network icon to show availability of internet connection?

  Flashing

  Hi RaDiCal007,

  Microsoft has removed the option host connection icon network; apparently drain you resources. Like you, I prefer much the icon 'flashing '.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How to make the Windows 7 network icon to show availability of internet connection?

  Hello!
  Windows 7 network icon shows no availability of internet connection. Windows Vista network icon showed availability of internet connection with a globe. How to make the Windows 7 network icon to show availability of internet connection?
  Concerning

  Hello kopn,.

  Thank you for visiting the Microsoft answers community.

  The icon for your internet connection, but the animation and the color associated with the network icon in Vista and earlier versions is no design in Windows 7.
  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to create the ad hoc network?

  I am sort of new things to advanced, can someone explain me how to create an ad hoc network in a simple way?

  Hi This is very easy, you will find many tutorials online. You can order this one if it does not help to go on this http://www.youtube.com/watch?v=Pw6RTBJFGO4&feature=youtu.be video

• How can I put it to delete messages on my server after download?

  How can I put it to delete messages on my server after download?

  To make a new folder that you go to the folder you want the new folder created under, in this case, the local folders. Click with the right button on local folders and select new folder.

  When moving messages in IMAP, you want to be offline, syncing Thunderbird/server is out of the picture, and then drag the messages from the existing to the new folder new folder and drop them there.

  If you hold down the CTRL key while that drag / drop, you will see a + signs seem to indicate that it will be a copy and not a gesture.
  You can also use the menu system and the Move To Copy To commands or if you feel better about that than the drag and drop method. It's under the Message in the menu structure.

  You must use standard selection methods to work with more message at a time.

  control a = select all

  Select item1, up or down several elements and hold the SHIFT key while selecting the point 2 = selects items 1 and 2 and all the items between the two

  Hold down the CTRL key while clicking random objects = select any element that is clicked on

  Hold down the CTRL key while clicking on a selected item = deselect this item

  I don't know what to tell you on the filters. I do not use IMAP or filters myself if I don't want to tell you bad.

• How can I copy files from project Waveburner to another internal drive?

  How can I copy files from project Waveburner to another internal drive without losing the connection to the files audio orig.?

  Thank you for your time,

  Since no one answered my call, I sat and researched and studied WaveBurner behavior and I can myself answer my question and solve. Since there were a lot of people asking similar questions on WaveBurner files I will post what I learned.

  Whenever you drop your audio files in the list window to make your WaveBurner CD copy not copy your audio files, but relies on the original audio file, where they are located. So whenever you move the files orig. and you open WaveBurner, it can't find those and displays an error window to suggest it will search for the missing file or if you know where he is now lets you find manually. WaveBurner usually place the .wb3 project file that contains everything including your home folder.

  For this reason, I reserve now an audio file WaveBurner also folder in my home folder. In order to save themselves from WaveBurner cannot find the audio file, all audio files that I do, I put in my folder of audio files WaveBurner first, then copy them in WaveBurner from there.

  When I need to use a bigger hard drive I copy .wb3-WaveBurner projects based, but also my

  Sound folder WaveBurner for the home folder on the new hard drive.

  WaveBurner is now all audio files without problem.

  I hope that this will be a unique problem to someone else. Happy WaveBurning.

  W.W.