How do I find my network password, network discovery network sharing share incoming Networking incoming Remote Assistance Remote Desktop RDP TS Remote Desktop

Similar Questions

• How can you find your restrictions password if you remember?

  How can you find your restrictions password if you do not remember?

  Read How to reset the forgotten password Restrictions with iPhone restore?

• How can I find my "network security key?

  Hello world...

  I am a netbook which is preloaded with windows 7 starter. My PC is 64-bit windows vista ultimate. I have an ADSL router that is connected to the computer with a network cable (yellow) - internet works fine.

  I'm trying to connect my netbook to the wireless router, and the netbook from asking a "network security key.

  Where exactly can I find it? I can't find that whatever this is named network security key to my router settings...

  Thank you very much!!

  The wireless security key is in the settings of your router. See below for how to configure a wireless network in complete safety. It will also cover where you will find these settings.

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

  Excellent guide for setting up of a wireless network, with images - http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  MS - MVP - Elephant Boy computers - don't panic!

• Equium A110-252 - how can I find the network drivers?

  Hi guys :)

  I have just reinstalled Win XP on a model number Equium A110 - 252 PSAB2E
  Can't find driver for network controller... everyone has ideas?
  Ive looked for in these forums, but in vain :(
  any help would be appreciated

  Thank you

  GW

  Have you looked on the Toshiba site?
  You will find the network driver and all other drivers.

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• How can I find my network security key / password of my Internet

  My family ALWAYS come and they bring their laptop. I already have a network in place, but I forgot my password/security key, and we all hurt to spot on my computer... Please help

  (Note: this will work only on a computer that is connected to your wireless network.)
  Here's a Win7 PC; Vista will be very similar, though)

  Network control and Internet\Network and sharing Center
  Click on 'manage wireless networks' in the left pane. see the list of all wireless networks to which you are connected.
  Locate your network wireless in the list.  Right-click > properties.  Click the Security tab.  Check the "Show characters", and that Windows displays the network key (as well as the type of security & encryption type).  {For security reasons, you can not view the key to a network that you are not currently logged.}

  HTH,
  Chris

• How can I find the network key for my home network?

  I have just purchase a new laptop and access the internet via my home network. The new laptop wonder the network key. Where can I find that on my computer at home?  I had someone else set up the network for me.

  The network key or WEP/WPA key, you should be able to find on your router or access point.  Open your browser and type the IP address of your router to access wireless and search of WEP security or the protection of the network area.  Quite a few routers/access points are configured as 192.168.0.1, that intellectual property then give it a shot in your browser by default.  If it is by default, the name of user/pass is always likely admin/admin or admin and then empty password.

  I hope this helps!

• How can I find the network name (SSID) and the chain of security for my network

  I have a wireless network with a printer on it - even if the printer is connected with a wire.  I want my laptop to be able to use the printer wireless to another room - instructions for putting in place early yb requiring the SSID and the security chain.

  Hi petetyler81,

  You can connect to the router manufacturer's website and make sure that the SSID and find the string, otherwise you can contact the manufacturer of the router and check.

  For more information, see the link:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Hope this information is useful.

• How can I find my network place after completing the wizard?

  I think I used wizard correctly but couldn't find workplace Mynet

  You can view directly in

  go to windows start

  Click RUN , and then type npca.cpl then ok

  Anil

• How do I find my wireless password, I want to add my printer wireless

  I have a wireless printer which at the present time, is connected to my laptop via a usb port because I forgot my wireless password.  How do I rectrieve the password and connect to the printer.  Also, if someone else in my house to use my wireless connection how do they do that?

  Ros

  Hi Ros,

  1. who is the ISP?

  2. which version of the Windows operating system is installed on your computer?

  You will need to contact your Internet service provider for the Wifi password and for any help related to wifi.

  See the following Microsoft article and try to use any other wireless connection and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/view-and-connect-to-available-wireless-networks

  Hope the information is useful.

• How can I find my wifi password to connect my ipod?

  I need to know where I can find the password to access my wifi

  If you or someone else have not changed the settings on your router to the network should be open by default.  But if one changed settings top then you will need to request this password to this person that they gave him.
  If you can't find someone who knows the password, follow the instructions below:

  Take a small paper clip or pen (although it either with a hint will do) and activate the reset button tiny on your router.
  Once reset look on the default router login information.
  Now, you need get on your computer.

  Try and connect again (if you can't connect using a cat5 cable)

  Click Start, then type cmd and press enter
  in the black box that opens type ipconfig, and then press on enter
  Look at the number next to the text 'default gateway' (192.168.1.1 or 192.168.1.0)
  Open your web browser and type that number in the address bar (with periods), and then press enter
  Once the box asking you to open a session opens, use the information provided by your router to connect
  From here you can change the security settings
  (if you want to help to change the security settings please provide the name and model of your router)
  (example) Linksys WRT54GL
  If it was an Internet service provider router and was taken by them, contact your ISP.

• How can I find my unsaved password that I entered?

  I want to find the passwords that I have used that I chose not to remember, and now I need to know these passwords. Where can I find these passwords?

  == I forgot the password

  Maybe if you do a system restore, but it is if its been a few weeks ago, I doubt that you can go back that far, why not just create a different password

  Good luck
  MJB
  Firefox LiveChat support

• How can I find out the password for my router, I missed place

  I want to add another computer to use though, I can't find the password for my router.  Is it possible to find it on one of my other computers.

  Except if you have really tightened down on the security of your router, adding another computer should be a simple to plug it.  In any case, most routers can be reset by default (including the password) by pressing the button of reset for about 10 seconds.  As you do not have the brand or the model of router in your post, all I can recommend is for more specific information, you should go to your router manufacturer's website and download the manual for your make and model of router and follow the instructions.

  HTH,
  JW

• How can I find out the password to one of my email accounts (forgotten & lost in the upgrade to Windows 7)?

  I have 3 email accounts and managed to re-setup 2 of them successfully. However, I don't remember the password to 3rd, who was named more precisely (and this is why I don't want to set up another new account).

  You must ask your ISP to reset the password for you, then keep a written record of all passwords.

• How can I find my Adobe password?

  I want to connect to another device and I do not see where my password is stored, and there is no option "forgotten password".

  Go here:

  Click on: Sign in

  Click on forgotten password

• I get a pop-up dialog box that says: snagit is unable to open this file. How can I find the file?

  I have a yellow triangle with a 1 in it, but no other information that the program opens. How can I find the file?

  I suggest that you only contact Snagit for assistance with this error.
  http://support.softwarecasa.com/kb/browse/000938

  Thank you